-
Address
C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
-
Call us on
+92-21-35070751
+92-300-5776703
-
- You are here:
-
Home
-
Product
-
Siemens
-
simatic 1200
- simatic 1200 Cm
- Integrated profinet
- Simple comunication
- profibus
- GPRS
- Additional Standard
- Telecontrol
- Add Ons
Integrated profinet communication
|
IMATIC S7-1200 supports communication via PROFINET – the open, manufacturer-independent standard (IEC 61158/61784). PROFINET is 100% Ethernet and stands for maximum transparency, open standard communication via TCP/IP, network security and simultaneous real-time communication. The integrated PROFINET interface in SIMATIC S7-1200 can be used for programming the CPU and for communication with SIMATIC HMI Basic Panels for visualization, but also for communication with other controllers or IO devices such as drives. The PROFINET cable is connected by means of a noise-immune RJ45 port with auto-crossover functionality supporting Ethernet connections and providing data transmission rates of up to 10/100 Mbit/s. For quick and error-free installation or changes on site, with FastConnect Siemens offer a sophisticated quick-assembly system consisting of cables, plug-in connectors and assembly tools. One of the advantages, thanks to PROFINET, is the integrated Web Server of the SIMATIC S7-1200. By means of the integrated Web server, information about the CPU as well as process data can be retrieved via a standard web browser. Data can also be archived from the user program during runtime. Furthermore, in firmware version 4.0, the CPUs possess the PROFINET iDevice functionality. The simplest way to configure multiple S7-1200 CPUs into a master-slave architecture: Each CPU process image is individually written and read. |
 |
Simple networking
To minimize the cabling overhead and maximize the network flexibility, the CSM 1277 compact switch module can be used for configuring a homogenous or hybrid network – in linear, tree or star topologies. The CSM 1277 is a 4-port unmanaged switch which allows you to connect the SIMATIC S7-1200 with up to three additional devices.
|
Communication module | |
|---|---|
|
CSM 1277 Compact Switch Module |
 |
|
Order Information |
Article No. |
|
CSM 1277, |
Each SIMATIC S7-1200 CPU can be expanded with as many as three communication modules.
The RS485 and RS232 communication modules are suitable for serial, character-based point-to-point connections.
The library functions USS Drive Protocol and Modbus RTU Master and Slave Protocol are already included in the SIMATIC STEP 7 basic engineering system.
Integration of identification systems
Using the RF120C communication module all SIMATIC identification systems (RF200/300/600 and optical reader system MV400) can be connected directly to the SIMATIC S7-1200. A reader can be connected to a RF120C via the point-to-point connection. The RF120C also provides a library with application blocks that are very easy to handle. Configuration is carried out via the TIA Portal.
|
Communication module | |
|---|---|
|
CM 1241 Communication module |
 |
|
Order Information |
Article No. |
|
9-POL. Sub D (Male), |
|
|
CM 1241 RS232 |
6ES7 241-1AH32-0XB |
|
CM 1241 RS422/485 |
6ES7 241-1CH32-0XB0 |
|
CB 1241 RS485 Communication board |
 |
|
Order Information |
Article No. |
|
CB 1241 RS485 Communication board, |
6ES7 241-1CH30-1XB0 |
|
SIMATIC RF120C |
 |
|
Order Information |
Article No. |
|
RS422, |
6GT2002-0LA00 |
The use of the SIMATIC S7-1200 as a master or slave on the proven PROFIBUS field bus facilitates standardized communication from the field level through to the control level. This meets one of the most important requirements in the performance range of compact automation.
For the connection of the S7-1200 to PROFIBUS there are two communication modules (CMs): The DP-Master CM 1243-5 enables as many as 16 field devices to be connected as slaves, e.g. ET 200 distributed I/O modules. Together with the CM 1242-5, the S7-1200 functions as a DP-Slave and can thus be connected to any DP-Master. Both modules are readily connected on the left of the CPU via the backplane bus.
|
Communication module | |
|---|---|
|
DP-Master CM 1243-5 |
 |
|
Order Information |
Article No. |
|
For connection of SIMATIC S7-1200 to PROFIBUS |
|
|
CM 1243-5 PROFIBUS DP Master |
6GK7 243-5DX30-0XE0 |
|
CM 1242-5 PROFIBUS DP Slave |
 |
|
Order Information |
Article No. |
|
For connection of SIMATIC S7-1200 to PROFIBUS |
|
|
CM 1242-5 PROFIBUS DP Slave |
6GK7 242-5DX30-0XE0 |
Together with the GPRS communication processor, the S7-1200 CPU permits easy, wireless applications for controlling, monitoring and checking distributed stations using the general packet radio service (GPRS). This not only enables the remote control of machines via Teleserver Basic, but also the data recording. Apart from sending text message notifications for event-oriented fault diagnostics, the GPRS modules permit additional teleservice functions such as global remote diagnostics, configuration and programming.
|
Communication module | |
|---|---|
|
CP 1242-7 GPRS |
 |
|
Order Information |
Article No. |
|
CP 1242-7 GPRS |
6GK7 242-7KX30-0XE0 |
AS-Interface
AS-i is an open, manufacturer-independent bus system that organizes the transmission of digital and analog process and machine signals into the control system. The AS-i Master communication module, as the "heart" of the AS-i Fieldbus can record sensors in the field or control actuators in the field.
The connection of an AS-i network to the SIMATIC S7-1200 is quite simple: the AS-i Master CM 1243-2 communication module is simply plugged into the CPU and wired to the field. The AS-i Master CM 1243-2 thus connects the lowest field level, such as IO modules, position switches, signaling columns, load feeders and motor starters with the higher-level SIMATIC S7-1200 control system. For each master, up to 62 AS-Interface slaves can be connected. All the advantages of the TIA Portal apply, such as the fully graphical parameter assignment and diagnostics of all AS-i stations without additional software.
|
Communication module | |
|---|---|
|
CM 1243-2 AS-i Master |
 |
|
Order Information |
Article No. |
|
CM 1243-2 AS-i Master |
3RK7 243-2AA30-0XB0 |
IO-Link
IO-Link facilitates a fast and easy integration of the SIRIUS compact starter, M200D starter, SIRIUS soft-starter for a simple control of the starter function as well as for the simple use of IO devices from third-party suppliers. Likewise, RFID readers can quickly and easily be integrated via IO-Link.
|
IO-Link | |
|---|---|
|
IO-Link SM 1278 |
 |
|
Order Information |
Article No. |
|
IO-Link Master SM 1278, |
6ES7 278-4BD32-0XB0 |
The telecontrol communication processors offer a range of different possibilities for the implementation of extremely versatile and cost-efficient Telecontrol remote stations (RTUs) based on SIMATIC
S7-1200.
TeleControl Basic
TeleControl Basic is based on SIMATIC S7-1200 and secure transmission via mobile radio or the Internet. It is particularly suitable wherever small data quantities have to be transmitted over wireless connections or via the Internet. TeleControl Basic can be used as a low-cost fault signaling system, but thanks to the bidirectional communication facility, it is also suitable for simple telecontrol monitoring and control tasks.
Together with the GPRS communication processor, the S7-1200 CPU supports simple Telecontrol applications for monitoring and control of distributed stations using general packet radio service (GPRS). The GPRS CP 1242-7 enables SMS messaging for event driven fault diagnostics. Additional full Teleservice functionally can be realized for remote diagnostics, configuration & programming.
The CP 1243-1 communications processor is used for connecting a SIMATIC S7-1200 to the TeleControl Server Basic control center software via Ethernet and for safe communication via IP-based networks in combination with an industrial router e.g. SCALANCE M.
|
TeleControl Basic Components | |
|---|---|
|
CP 1242-7 For connection of SIMATIC S7-1200 to GSM/GPRS NET |
 |
|
Order Information |
Article No. |
|
CP 1242-7 GPRS |
6GK7 242-7KX30-0XE0 |
|
CP 1243-1 For connecting SIMATIC S7-1200 to TeleControl Server Basic |
 |
|
Order Information |
Article No. |
|
CP 1243-1 |
6GK7243-1BX30-0XE0 |
TeleControl Professional
The communication processors CP 1243-1 DNP3 and CP 1243-1 IEC expand the TeleControl Professional portfolio with standardized remote control protocols. Both CP 1243-1 variants offer cycle and event-driven transmission of measured values and set values as well alarms between RTU and central control system without the need for costly programming. The connection to the control station over various public or private remote networks is performed via external modems/routers such as SCALANCE M, which are connected to the Ethernet interface of the CP.
|
TeleControl Professional Components | |
|---|---|
|
CP 1243-1 DNP3 For connecting of SIMATIC S7-1200 |
 |
|
Order Information |
Article No. |
|
CP 1243-1 DNP3 |
6GK7243-1JX30-0XE0 |
|
CP 1243-1 IEC for connecting SIMATIC S7-1200 |
 |
|
Order Information |
Article No. |
|
CP 1243-1 IEC |
6GK7243-1PX30-0XE0 |
The CM CANopen enables you to connect any CANopen or CAN 2.0A devices to your SIMATIC S7-1200 PLC. The module plugs into your S7-1200 and acts as a bridge between the CANopen/CAN devices and the micro PLC. This allows you to choose from a wider range of automation products when designing your system.
CANopen and CAN 2.0A support
Simply attach the CM CANopen expansion module to the SIMATIC S7-1200 PLC. Any device running the CANopen protocol or any custom CAN 2.0A based protocol can then be connected.
Once attached to the S7-1200, you then set up the CM CANopen module from within TIA Portal®. Your CANopen network configuration can then be made in the accompanying CM CANopen Configuration Studio.
The CM CANopen module can be configured to be either a Master or Slave from TIA Portal. No programming is needed to create the configuration.
Highlights
-
Plug-in CANopen Master/Slave module for SIMATIC S7-1200 PLC
-
Connects up to 16 CANopen slave nodes in master mode
-
256 byte input and 256 byte output per module
-
Connects up to 3 modules per CPU
-
3 LEDs provide diagnostic information on module, network and I/O status
-
Integratable in the hardware catalogue of the TIA Portal configuration suite
-
Support for transparent CAN 2.0A for custom protocol implementation
-
CANopen configuration via the included CANopen Configuration Studio Software
-
Pre-made function blocks available for easy PLC programming in TIA portal
-
Complies to the CANopen communication profiles CiA 301 rev. 4.2 and the CiA 302 rev. 4.1
-
3 year product guarantee. *
|
Communication module * | |
|---|---|
|
Order at HMS Anybus: |
 |
Note *:
The CM CANopen module is an HMS product and can only be obtained through HMS.
The following description contains information on supplementary products that are manufactured and marketed, not by Siemens, but by third-parties outside the Siemens group ("external companies"). These external companies organize the manufacture, sale and delivery of their products independently. Their own terms and conditions of business and delivery apply.
Responsibility for these supplementary products and for the associated information presented here rests exclusively with the respective external company. Unless compulsory by law, Siemens assumes no liability and makes no guarantee for supplemental products of external companies. Please refer also to the note on "Exemption from liability/Use of hyperlinks".
Exemption from liability/Use of hyperlinks
Siemens has prepared this description with great care. It is not possible, however, for Siemens to verify that the data supplied by external companies is complete, correct or up to date. The possibility that individual items of information might be incorrect, incomplete, or not up-to-date cannot therefore be ruled out. Unless compulsory by law, Siemens accepts no liability for the usability of the data or of the product for the user per se.
This article contains third-party Web addresses. Siemens is not responsible for the contents of these Web sites, nor does Siemens adopt these Web sites and their contents, as Siemens does not control the presented information and cannot be held responsible for the content and information they contain. You therefore use these links at your own risk.