• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-4017+

8-ch Analog Input Module with Modbus


Main Features

  • 16-bit resolution
  • Eight different inputs
  • Software configurable for mV, V or mA inputs
  • 3000 Vdc isolation
  • Supports Modbus/RTU Protocol
  • Supports 4~20mA
 
Introduction


The ADAM-4017+ is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. These modules are an extremely cost-effective solution for industrial measurement and monitoring applications. 3000 VDC optical isolation between the analog input and the modules protects the modules and peripherals from damages caused by high input voltages.
Specifications
Part Number ADAM-4017+-CE
Analog Input Burn-out 
Detection		 N/A
Channel 
Independent 
Configuration		 Yes
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 N/A
Voltage Input 0 ~ 150 mV, 0 ~ 500 mV, 
0 ~ 1V, 0 ~5 V, 0 ~ 10 V,
Analog Output Current Output N/A
Voltage Output N/A
Digital I/O Digital Input 
Channel		 N/A
Digital Ouput 
Channel		 N/A
Other Isolation 3000 VDC

Products

C&M rovides a range of automation products from a number of manufacturers.

Our product range includes both automation building blocks like programmable logic controllers PLC's, Human Machine Interface HMI, industrial communication adapters, and customized products, like Compressor Management System and Battery Life Cycle Tester.

 

AB

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology

customized

C&M Engineering has designed a reliable and robust compressor management system that is available as a customized product specifically configured according to your pressure demand.

MITSUBISHI

MITSUBISHI

Analog input modules provide an interface to the CPU for sensing variable real world levels of voltage and current signals. These signals are converted into digital values by the modules

Omron

Omron

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept.Lean Automation fits into stand-alone

Siemens

Siemens

Signal modules are the interface of SIMATIC S7-300 to the process. A host of different digital and analog modules provide exactly the inputs/outputs required for each task.

Thinget

Thinget

Thinget PLC is powered by Digital and Analogue Expansion modules, BD boards, motion controllers, PT100, Thermocouple Input

equipped with built-in PID controller, and high