• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-6160EI

6-ch Relay Output EtherNet/IP Module


Main Features

  • EtherNet/IP protocol
  • 6-ch Form C relay output
  • Breakdown voltage: 500 VAC (50/60 Hz)
  • 2 x RJ-45 LAN (daisy chain)
  • Contact Rating: 5 A @ 250 VAC; 5 A @ 30 VDC)
 
Introduction


Advantech's ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Designed with 2,500 VDC isolation protections, ADAM-6160EI, 6-ch relay output EtherNet/IP module, is very resistant to field interference. It is also equipped with the EtherNet/IP protocol, and allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. More importantly, Advantech's ADAM.NET Utility comes bundled with each ADAM-6100 module, allowing users to configure, set, and test ADAM-6100 modules through Ethernet.

Specifications
Part Number ADAM-6160EI-AE
Analog Input Channels -
Current Input -
Direct Sensor 
Input
-
Resolution -
Sampling Rate -
Voltage Input -
Input Channels -
Output Channels 6-ch power relay
Interface 10/100 Mbps Ethernet
Support Protocol EtherNet/IP
Connectors 2 x RJ-45 LAN (Daisy Chain), Plug-in screw terminal block (I/O and power)
Isolation Protection 2,500 VDC

 

Products

C&M rovides a range of automation products from a number of manufacturers.

Our product range includes both automation building blocks like programmable logic controllers PLC's, Human Machine Interface HMI, industrial communication adapters, and customized products, like Compressor Management System and Battery Life Cycle Tester.

 

AB

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology

customized

C&M Engineering has designed a reliable and robust compressor management system that is available as a customized product specifically configured according to your pressure demand.

MITSUBISHI

MITSUBISHI

Analog input modules provide an interface to the CPU for sensing variable real world levels of voltage and current signals. These signals are converted into digital values by the modules

Omron

Omron

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept.Lean Automation fits into stand-alone

Siemens

Siemens

Signal modules are the interface of SIMATIC S7-300 to the process. A host of different digital and analog modules provide exactly the inputs/outputs required for each task.

Thinget

Thinget

Thinget PLC is powered by Digital and Analogue Expansion modules, BD boards, motion controllers, PT100, Thermocouple Input

equipped with built-in PID controller, and high