APAX-5080
| 4/8-ch High Speed Counter Module | ||
 |
|
|
| Introduction | ||
|
Advantech's APAX-5080 Counter Module features up to eight channels and hot-swappable functionality. With its 4/8 counter channels, the APAX-5080 is capable of simultaneously taking counts from multiple sources using any of its five operating modes ( UP, UP/Down, Frequency, Pulse/Direction, and A/B Phase modes), therefore saving hardware installation costs and having greater scalability. The flexibility of the APAX-5080 is enhanced with the additional benefit of four DI counter gates to define when a counter is enabled, and four DO alarm output channels triggered by a specific counter value; so that the APAX-5080 can be configured to send an alarm message when certain criteria are met. |
||
| Specifications | ||
| Part Number | APAX-5080-AE | |
| General | Certifications | CE, FCC class A |
| Dimensions (W x H x D) | 30 x 139 x 100 mm | |
| Enclosure | ABS+PC | |
| Weight | 170 g | |
| Power Consumption | 2.5 W @ 24 VDC (typical) | |
| Status Display | LED per channel (for DI, DO channel) | |
| Counter/Frequency Input | Channels and Mode | 8 (Up and Frequency mode), 4 (Pulse/Direction, Up/Down, A/B phase mode) |
| Counting Range | 32-bit + 1-bit overflow/ underflow | |
| Minimum Pulse Width | 1 µs | |
| Counter Frequency | 1 MHz (max.) | |
| Input Voltage | For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC | |
| Digital Input | Channles | 4 |
| Type | Source Load | |
| Input Voltage | For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC | |
| Digital Output | Channels | 4 (Sink Type) |
| Output Voltage Range | 8 ~ 35 VDC | |
| Rated Output Current | 0.5 A (per channel) | |
| Environment | Operating Temperature | -10 ~ 60° C (when mounted vertically |
| Storage Temperature | -40 ~ 70°C | |
| Relative Humidity | 5 ~ 95% (non-condensing) | |
