SIMATIC S7-300 CPU 312
Entry CPU for small-scale applications with moderate requirements on the processing speed.
-
MPI-interface onboard
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 314
SIMATIC S7-300, CPU 314 Central processing unit with MPI, Integr. power supply 24 V DC, work memory 128 KB, Micro Memory Card required
CPU for installations with medium requirements on program scope.
-
High processing performance in binary and floating-point arithmetic
-
MPI-interface onboard
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 315-2 DP
SIMATIC S7-300, CPU 315-2DP Central processing unit with MPI Integr. power supply 24 V DC Work memory 256 KB 2nd interface DP master/slave Micro Memory Card required
The CPU with medium to large program memory and quantity framework for the use, if required, of SIMATIC Engineering Tools.
-
High processing performance in binary and floating-point arithmetic
-
PROPROFIBUS DP master/slave interface
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 315-2 PN/DP
SIMATIC S7-300 CPU 315-2 PN/DP, Central processing unit with 384 KB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
The CPU with a medium program memory and quantity framework
-
40 mm width
-
High processing performance in binary and floating-point arithmetic
-
Used as a central controller on production lines with central and distributed I/O
-
Integral PROFINET interface with 2 Ports for line topologies
-
Combined MPI / PROFIBUS DP-master/slave interface
-
Component based Automation (CBA) on PROFINET
-
PROFINET-proxy for intelligent devices on PROFIBUS DP in Component Based Automation (CBA)
-
PROFINET I/O Controller for operating distributed I/O on PROFINET
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 317- 2 DP
SIMATIC S7-300, CPU 317-2 DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP master/slave Micro Memory Card required
The CPU with a large program memory and quantity framework for demanding requirements
-
For multisector automation tasks in the construction of series machines, special machines and plants
-
Used as a central controller on production lines with central and distributed I/O
-
High processing performance in binary and floating-point arithmetic
-
PROFIBUS DP master/slave interface
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 317-2 PN/DP
SIMATIC S7-300 CPU 317-2 PN/DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
The CPU with a large program memory and quantity framework for demanding requirements
-
40 mm width
-
Distributed intelligence in Component Based Automation (CBA) on PROFINET
-
PROFINET proxy for intelligent devices on PROFIBUS DP in Component Based Automation (CBA)
-
PROFINET I/O controller for operating distributed I/O on PROFINET
-
2 PROFINET Ports for line topologies
-
For multisector automation tasks in the construction of series machines, special machines and plants
-
Used as a central controller on production lines with central and distributed I/O
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
High processing performance in binary and floating-point arithmetic
-
Combined MPI/PROFIBUS DP-master/slave interface
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 318-3 PN/DP
SIMATIC S7-300 CPU 318-3 PN/DP, Central processing unit with 2 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP master/slave 3rd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
The CPU with high command processing performance, large program memory and quantity framework for demanding applications
-
Integral PROFINET interface with 2 Ports for line topologies
-
For cross-sector automation tasks in series machine, special machine and plant construction
-
Used as central controller in production lines with central and distributed I/O on PROFIBUS and PROFINET
-
Distributed intelligence in Component Based Automation (CBA) on PROFINET
-
PROFINET proxy for intelligent devices on PROFIBUS DP in Component Based Automation (CBA)
-
Isochronous mode on PROFIBUS
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
Technical Data
