CPUs with integrated motion control functionality
Description
For typical motion control applications like coupled motion sequences of multiple axes both technology controllers 315T-3 PN/DP, CPU 317T-3 PN/DP are available. The CPU 317TF-3 PN/DP controller offers additionally fail-safe functions.
The highlights of the current SIMATIC technology controllers:
-
PN interface for the control side with integrated 2-port switch
-
Integrated Web server and know-how protection (S7 Block Privacy)
-
Width reduced by 120 mm and CPU performance up to 8 times better as compared to the predecessor models
Pre-programmed PLCopen-compliant function blocks are available to simplify generation of a user-specific project:
The STEP 7 option package S7-Technology can be used for programming and commissioning of all technology functions.
Up to 32, or respectively 64, technology objects can be processed simultaneously.
SIMATIC S7-300 CPU 315T-3 PN/DP
SIMATIC S7-300, CPU 315T-3 PN/DP, Central processing unit for PLC and technology tasks, 384 KB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP (drive), 3rd interface Ethernet PROFINET with 2-port switch, Integr. I/O for technology, Front connector (1x 40-pole) and Micro Memory Card min. 8 MB required
The technology CPU for up to 32 technology objects with medium to large program memory and quantity framework for the use, if required, of SIMATIC Engineering Tools.
-
High processing performance in binary and floating-point arithmetic
-
With PROFINET and PROFIBUS DP interface
-
Connection of drives via PROFIBUS DP(DRIVE)
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
384 KB work memory
SIMATIC S7-300 CPU 317T-3 PN/DP
SIMATIC S7-300, CPU 317T-3 PN/DP, Central processing unit for PLC and technology tasks, 1024 KB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP (drive), 3rd interface Ethernet PROFINET with 2-port switch, Integr. I/O for technology, Front connector (1x 40-pole) and Micro Memory Card min. 8 MB required
The technology CPU for up to 64 technology objects with a large program memory and quantity framework for demanding requirements
-
For multisector automation tasks in the construction of series machines, special machines and plants
-
Used as a central controller on production lines with central and distributed I/O
-
High processing performance in binary and floating-point arithmetic
-
With PROFINET and PROFIBUS DP interface
-
Connection of drives via PROFIBUS DP(DRIVE)
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
Supports as an option the use of SIMATIC Engineering Tools
-
1 MB work memory
SIMATIC S7-300 CPU 317TF-3 PN/DP
SIMATIC S7-300, CPU 317TF-3 PN/DP, Central processing unit for PLC, Technology and safety tasks, 1.5 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP (drive), 3rd interface Ethernet PROFINET with 2-port switch, Integr. I/O for technology, Front connector (1x 40-pole) and Micro Memory Card min. 8 MB required
The SIMATIC CPU 317TF-3 PN/DP is a controller that enables motion control, standard and safety-related applications to be processed in one single device. Thanks to the integration of Safety Integrated, the controller meets the stringent safety requirements of the relevant standards, i.e. EN 954-1 up to Cat. 4, IEC 62061 up to SIL 3 and EN ISO 13849-1 up to PL e for safety-related applications.
The STEP 7 option package Distributed Safety features pre-programmed TÜV-certified library blocks for fail-safe applications, e.g. for Emergency Stop, two-hand control, muting and door monitoring.
The technology controller provides for 64 technology objects and incorporates both a large program memory and a large quantity framework for sophisticated applications.
-
For cross-industry automation tasks in series machines, special machines and plant construction
-
Conformity with the relevant standards: EN 954-1 (up to Cat. 4), IEC 62061 (up to SIL 3), EN ISO 13849-1 (up to PL e)
-
Direct execution of fail-safe functions related to the drives
-
With PROFINET and PROFIBUS DP interface
-
Connection of drives via PROFIBUS DP(DRIVE)
-
PROFIsafe via PROFINET or PROFIBUS
-
Use as central controller in production lines with centralized and distributed I/O
-
High processing capacity for binary and floating-point arithmetics
-
Suitable for large I/O configurations
-
Suitable for distributed I/O configurations
-
Optionally supports the use of SIMATIC Engineering Tools
-
For failsafe communication, the controller uses PROFIBUS DP and PROFINET with the PROFIsafe protocol
-
Failsafe functions from the drives can be processed directly
-
1.5 MB work memory
Applications
In combination with the PLCopen-compatible motion control blocks, the technology controllers are particularly well suited for coupled motion sequences of multiple axes.
Along with position-controlled single axis positioning, primarily complex, synchronized motion sequences are possible, e.g. gearbox synchronization, cam disk synchronization and print-mark correction. The synchronized axes can be combined to a virtual or actual master.
For path interpolations, powerful PLCopen-compatible functions are available that support various standard kinematics (SCARA, roll picker, articulated arm robot, delta-picker 2D/3D).
The isochronous PROFIBUS DP(DRIVE) permits control of the axes over a digital bus system. The two ther interfaces (PROFINET and PROFIBUS) can be used for user-friendly parameterization and commissioning of the drives from a PC/programming device.
As a result, the technology controllers can be used for a host of new applications, e.g.:
-
Processing/assembly lines
-
Throughput machines
-
Handling systems
-
Cross-arms
-
Gantries
-
Filling
-
Wrapping
-
Roll feeds
-
Flying shears
-
Carton erectors
-
Labeling machines
-
Cross cutters
-
Hydraulic presses
-
Palletizers
Benefits
The advantages at a glance
-
High economic efficiency and flexibility by implementing your PLC, motion control and technological demands as well for safety-related applications
- Scaleable PLC performance (CPU 315T/CPU 317T/CPU 317TF)
- Integration of technology/motion control and optionally fail-safe functions in a SIMATIC CPU
- Centralised/decentralised expandability for a wide variety of tasks provided by the use of the comprehensive SIMATIC product line -
Cost savings by means of the absolute simple and fast engineering:
- From drives to motion control to PLC and optionally fail-safe functions - all with STEP 7
- Reduced programming costs/optimised time-to-market by the reuse of existing S7 programs
- PLCopen-certified motion control functions facilitate engineering and service
- Option package Disrtibuted Safety with fail-safe TUEV certified function blocks for safety-related applications with
CPU 317TF
- Reduced training effort for commissioning and service people thanks to full programming in all SIMATIC languages
Design and function
The technology CPUs combine:
-
The powerful CPU 315-3 PN/DP or CPU 317-3 PN/DP and
-
PLCopen-compatible motion control functions and optionally fail-safe functions.
The technology CPUs are compactly built with high-speed distributed I/Os (4 digital inputs, 8 digital outputs) and two PROFIBUS and one PROFINET interface with 2-port switch:
-
Isochronous PROFIBUS interface DP(DRIVE) for the dynamic motion control of several coupled or single axes
-
MPI/DP interface for connecting other SIMATIC components, for example PG, OP, S7 controllers and distributed I/O.
For operation as a DP interface, extended networks can be set up. -
CPU 317TF-2 DP: PROFIsafe via PROFIBUS for fail-safe communication
For programming the Technology CPUs you can use the STEP 7 option package S7-Technology with various ready-to-use function blocks
Technical data
