• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

SIMATIC ET 200MP Technology Modules

Technology modules offer hardware-level signal processing for rapid counting, measurement and position registration for a variety of transducers.

Technological functions such as motion control and high speed counter are already integrated in the SIMATIC S7-1500 CPUs and plannable via STEP 7 (TIA Portal)

Benefits

  • Rapid signal preprocessing for counting and measuring tasks in the high-speed range

  • Position detection for incremental and SSI absolute value encoders

  • Easy to use parameter assignment interface already integrated in SIMATIC STEP 7 (TIA Portal)

  • Efficient programming using technology objects

  • Fast reactions due to different hardware interrupts for internal/external events and count values

  • Reaction of modules to "CPU stop" can be configured

  • Can be operated centrally in the S7-1500 and distributed in the ET 200MP I/O system


Product range

The following Technology Modules for ET 200MP or S7-1500 are available:

 

TM Count 2x24V Counter Module

SIMATIC ET 200MP TM Count

The technology module TM Count 2x24V for 24 Volt input signals is a universal counter module for counting and measuring tasks as well as position input with incremental encoders. The module offers measuring functions for velocity and frequency as well as signal acquisition up to 200 kilohertz and is suitable for sophisticated tasks, for example, in the packaging, food or paper industry.

  • Supported encoder/signal types:
    - 24 V incremental encoder with and without signal N,
    - 24 V pulse encoder with direction signal,
    - 24 V pulse encoder without direction signal,
    - 24 V pulse encoder for forward & backward pulses

  • Max. counting frequency 200 kHz (800 kHz with quadruple evaluation)

  • Integrated DI: 3 digital inputs for control of the counting process, for saving or setting the counter values

  • Integrated DQ: 2 digital outputs for fast reaction depending of counter reading or measured value

  • Counting functions: Settable counting range up to +/- 2^31 bits

  • Measurement functions:  Flexible adjustment of measurement time and selectable output unit

  • Diagnostic interrupt: For example in case of errors at the load voltage or encoder

  • Configurable hardware interrupt

  • Supported system functions:  Isochronous mode, firmware update, identification data I&M

Article No: 6ES7550-1AA00-0AB0

 

TM Posinput 2 Counting and Position Detection Module

The ET 200MP TM PosInput 2 counting and position detection module offers two counting channel for differential input signals according to RS422 up to 1 MHz, as well as position detection with the aid of SSI absolute value encoders.
The connection of 5V TTL signals is also possible for the counting function.

  • Connection of SSI absolute value encoders
    - Frame lengths from 10 to 40 bits
    - Position values up to 31 bits
    - Forwarding of encoder status information

  • Counting of different signal shapes of the count signal
    - 1-track count signal, e.g. for counting products or detecting flow or energy volume
    - 2 separate count signals for forwards and backwards,
      e.g. for detecting the content of a container with inflow and outflow
    - 1 count signal with an additional direction signal
    - 2 tracks with 90° phase offset, optionally with zero track for detecting positions with incremental encoders

  • Measuring functions for Measuring frequency, period length and speed in selectable unit

  • 2 digital inputs per channel
    - for fast control of the count process by means of a HW gate
    - for saving the count value
    - for setting a count value due to an event

  • 2 digital outputs per channel for high-speed responses
    - depending on the counter value or position value
    - depending on the measured value

  • Integrated 24 V power supply for the encoders

  • Position detection for Motion Control in S7-1500 from Step 7 (TIA Portal V13)

  • The functionality and operator interface are compatible with the ET 200SP TM PosInput 1 module and allow simple switching between the I/O families S7-1500/ET200 MP and ET 200SP.

 
Typical applications:

  • Detection of positions

  • Detection of speeds

  • Detection of product lengths

  • Dosing of fill quantities

  • Application of adhesive beads

  • Measurement of workpieces

Article No. 6ES7551-1AB00-0AB0

 

TM Timer DIDQ 16x24V Time-based IO Module

ET 200 MP Timermodul

The time-based IO module ET 200MP TM Timer DIDQ 16x24V fulfills the highest demands for precision and speed, independent of the controller performance and the fieldbus.
Time-based IO assures that the signals are read-in and output precisely - to within 1 microsecond!

  • Up to 8 digital inputs with the following functions::
    -  Up to 8 digital inputs with the following functions:
    - Up to 2 time stamps per cycle
    - 32x oversampling
    - Counting function up to 50 kHz
    - Incremental encoder acquisition with 2 phase-shifted traces

  • Up to 16 digital outputs with the following functions:
    - Up to 2 time stamps per cycle
    - 32 x oversampling
    - Pulse width modulated output

  • Various combinations of digital inputs and outputs can be configured:
    - 0 digital inputs /16 digital outputs (for cam applications with many outputs)
    - 3 digital inputs /13 digital outputs (for configurations similar to FM 352)
    - 4 digital inputs /12 digital outputs (for flexible mixed operation)
    - 8 digital inputs / 8 digital outputs (for probes and incremental encoders)


Typical applications:

  • Exact definition of reaction times, independent of application cycle

  • Cam controller

  • Probes

  • Length measurement

  • Dosing of fluid quantities

  • Time measurement

Article No.:6ES7552-1AA00-0AB0

SIWAREX WP521 ST and WP522 ST Weighing Modules

SIWAREX WP521 Weighing Module

The two technology modules are the perfect solution for the seamless integration of standard weighing applications like platform or hopper scales in SIMATIC S7-1500.
The technology module is available in single and dualchannel variants. SIWAREX WP521 ST is the single-channel option for one scale while the dual-channel SIWAREX WP522 ST enables two separate scales to be integrated into the automation system - with same space requirements.

Integrated in SIMATIC S7-1500 all advantages of the automation system can be used. The free “ready-for-use“ application helps to create fast and easily customer and application specific solutions

Feature

 

Integration in automation systems

SIMATIC S7-1500/ET 200MP
Other Systems via Modbus RTU or Modbus TCP/IP

Communication interfaces (on board)

SIMATIC S7-1500 system bus
Per channel 1x RS485 (Modbus RTU, remote display)
Ethernet (Modbus TCP/IP,SIWATOOL)
Per channel 4x digital outputs (24V DC)
Per channel 3x digital inputs (24V DC)

Internal resolution

Up to +/- 4 million parts

Measuring rate

100/120 Hz

Typical applications

Basic scales, e.g. platform and hopper scales
gravimetric level measurement of silos and hoppers

Article No:

SIWAREX WP521 ST: 7MH4980-1AA01
SIWAREX WP522 ST: 7MH4980-2AA01

 

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2