CM 1542-1 communication module for connection to PROFINET

The CM 1542-1 communication module expands the SIMATIC S7-1500 controller to include a PROFINET connection. A PROFINET connection, an integrated 2-port switch with 10/100 Mbps, is used for communication with lower-level PROFINET devices. By means of the module, a separate PROFINET segment can also be implemented that takes on control of multiple field devices in a separate network. The CM 1542-1 assumes all communication tasks, thus reducing the CPU workload. STEP 7 Professional (TIA Portal) as of V13 is required to configure the full functional scope of the CM-1542-1.

•  Product selection and ordering

CP 1543-1 communication processor securely connects SIMATIC S7-1500 to Ethernet

The CP 1543-1 communication processor securely connects the SIMATIC S7-1500 controller to Ethernet networks. By combining a variety of security features such as an SPI (Stateful Packet Inspection) firewall and data encryption protocols such as FTPS and SNMPv3, the new communication module protects individual S7-1500 stations or even entire automation cells against unauthorized access. This allows the PLC to communicate with higher-level control systems or industrial IT applications via a secure Ethernet connection.

The administrator can regulate access to the S7-1500 by means of detailed firewall rules in CP 1543-1. The new communication processor also enables data transmission using the FTP/FTPS protocol. Furthermore, the module supports the IPv6 protocol, open communication via TCP and UDP as well as S7 communication. TIA Portal is used for configuring all functions. The communication processor makes its diagnostic information available to the S7-1500 controller; the user can then view and analyze this information via the front display by means of the TIA Portal or the S7-1500 Web server.

The SIMATIC CP 1543-1 has an RJ45 connector for establishing connections to Industrial Ethernet networks. Data can be transmitted using the full or half-duplex process in bandwidths of 10, 100 and 1000 mbps. The communication processor also ensures consistent time synchronization in the NTP (Network Time Protocol) process within the connected S7 station. Among other things, this can help identify error messages or synchronization problems within the network.

•  Product selection and ordering

With our comprehensive portfolio, we offer the right CP for every requirement, as lean, standard or added value versions for SIMATIC S7-300, the modular controller for innovative system solutions in the manufacturing industry. Connecting controllers via these CPs permits direct integration into Industrial Ethernet networks. The communication processors have multi-protocol capability and support the following protocols:

• PG/OP communication

• S7 communication

• open communication (SEND/RECEIVE)

• PROFINET communication

• IT communication

CP 343-1 Lean: Connects even small applications to Industrial Ethernet

The low-cost connection for programming devices and HMI devices, as well as for communication between S7 programmable controllers.

•  Product selection and ordering

CP 343-1: The tried and tested, rugged and secure standard versions

The efficient, reliable and rugged communication processor that links the S7-300 via Industrial Ethernet, also as a PN IO controller for the connection of PROFINET.

•  Product selection and ordering

CP 343-1 Advanced: From PROFINET to IT communication

In addition to the functionality of the CP 343-1, the CP 343-1 Advanced offers e-mail functions and user-created web pages and thus optimally supports maintenance and quality assurance. The Internet functions such as FTP even allow connection to the most diverse PC-based systems.

With its integrated security functions of firewall (Stateful Inspection), VPN protocol (IPSec) and protocols for data encryption such as FTPS and SNMPv3, the communications processor protects S7-300 stations and lower-level networks against unauthorized access, as well as protecting data transmission against manipulation and espionage by means of encryption. Therefore, for the S7-300, this CP is the bridge between the field level and the MES level.

•  Product selection and ordering

CP 343-1 ERPC: Connects SIMATIC S7-300 controllers with ERP / MES systems

In combination with a loadable firmware expansion, this communication processor offers efficient access via Industrial Ethernet to databases across all corporate levels without laborious programming of the controller.

•  Product selection and ordering

Within the controller family, the SIMATIC S7-400 is designed for system solutions in manufacturing and process automation in the medium to upper performance range. The connection of SIMATIC S7-400 via communications processors permits direct integration of the controllers into Industrial Ethernet networks. The communication processors have multi-protocol capability and support the following protocols:

• PG/OP communication

• S7 communication

• open communication (SEND/RECEIVE)

• PROFINET

• IT communication

CP 443-1: Convincing performance capability

The low-cost connection for programming devices and HMI devices, as well as for communication between S7 programmable controllers.

•  Product selection and ordering

CP 443-1 Advanced: The high-power version with Gigabit uplink and 4-port switch on board

In addition to the proven industrial features of the CP 443‑1, the CP 443‑1 Advanced, with IT functionalities such as e-mail, http-based diagnostics and user-created web pages, offers the ideal support for maintenance and quality assurance. The Internet functions such as FTP communication even allow direct connection to the ERP level without additional gateways. Thanks to two separate interfaces, the CP is suitable for network separation between control and field level, e.g. for load coupling.

The integrated 4-port switch on the second interface is particularly suitable for setting up small networks, e.g. for the connection of PROFINET I/O devices. With its integrated security functions of firewall (Stateful Inspection), VPN protocol (IPSec) and protocols for data encryption such as FTPS and SNMPv3, the communications processor protects S7‑400 stations and lower-level networks against unauthorized access, as well as protecting data transmission against manipulation and espionage by means of encryption. That's why this CP represents the the bridge between the field level over PROFINET and the MES level for the S7‑400.

•  Product selection and ordering

CP 443-1 RNA for redundant network structures

The CP 443‑1 RNA is the ideal solution for establishing Industrial Ethernet networks with high network availability for SIMATIC S7‑400 controllers. It can be used in SIMATIC H-systems and for fail-safe applications (PROFIsafe) in connection with an S7‑400 F‑CPU. It provides the possibility to connect an S7‑400 or S7‑400H via the PRP (Parallel Redundancy Protocol according to IEC 62439‑3) to parallel, separate networks in which high reliability is required.

•  Product selection and ordering

CP 443-1 OPC UA – More independence for your plant network

The growing demands on automation networks make open and independent data transfer more important than ever. The CP 443‑1 OPC UA communications processor offers a flexible solution. By using the standardized OPC UA interface, the processor enables direct and fast data exchange between automation components from different manufacturers.

The CP can be used as an OPC UA server as well as an OPC UA client. As OPC UA server, it provides data that the OPC UA clients such as HMI (Human Machine Interface), MES (Manufacturing Execution System), ERP or SCADA system can retrieve via data access. As an OPC UA client, the CP collects and writes to and from an OPC UA server using OPC UA services via user blocks in accordance with the standards of the PLCOpen organization. OPC UA is a standard for manufacturer-independent communication in the automation industry. The CP 443‑1 OPC UA supports OPC UA according to the specification 1.02.

•  Product selection and ordering