• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-4561

1-port Isolated USB to RS-232/422/485 Converter


Main Features

  • Full compliance with USB V1.1 specifications
  • RS-232/422/485 port supported
  • Transmission speed up to 115.2 kbps
  • Isolation protection 3000 VDC provided
  • Automatic RS-485 data flow control
  • No external power supply necessary; the hub derives its power from the USB port
  • Plug & Play installation
  • No additional IRQs or I/O ports required
  • Hot swap function supported
 
Introduction

ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. Thismakes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.
Specifications
Part Number ADAM-4561-BE
General Serial Screw 
Tterminal
USB Type B
Display Interface USB 1.1
Protection Isolation 3000 VDC
Surge 3000 VDC
Serial Ports 1
Type RS-232/422/485
Software Baud Rate 50 ~ 115.2 Kbps
Driver Windows 2000/2003/XP/Vista/7

ADAM-4522

RS-232 to RS-422/485 Converter


Main Features

  • Automatic RS-485 data flow control
  • Surge protection RS-485 data line
  • Transmission speed up to 115.2 Kbps
  • Networking up to 1200 meters (4000 feet)
  • Reserved space for termination resistors
  • Power and data flow indicator for troubleshooting
  • Power requirement: +10 to +30 VDC
  • Mounts easily on a DIN-rail, panel or piggyback
 
Introduction

Most industrial computer systems come with standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals. The ADAM-4520/4522 converter lets you take advantage of RS-422 and RS-485 on systems originally equipped with RS-232. It transparently converts RS-232 signals into isolated RS-422 or RS-485 signals. You do not need to change your PC's hardware or your software. The ADAM-4522 lets you easily build an industrial grade, long distance communication system with standard PC hardware. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of connected nodes by 32.
Specifications
Part Number ADAM-4522-AE
General Built-in I/O -
Comm. Distance Serial: 1.2 km
Comm. Protocol -
Comm. Speed Serial: From 1,200 to 115.2 k
Data Flow Control -
Interface Connectors RS-232: termale DB9 
RS-422/485: plug-in screw terminal
Isolation Voltage -
Network RS-232 to RS-422/485
Watchdog Timer -

USB-4604B

4-port Serial to USB Converter with ESD Surge Protection


Main Features

  • Full compliance with USB V1.1 and V2.0 specifications.
  • RS-232 port supported
  • Transmission speed up to 921.6 kbps
  • Bus-powered; no need for external power supply
  • Plug & Play installation
  • No additional IRQs or I/O ports required
  • Hot swap function support
 
Introduction

USB-4604 series allows PC users to connect a serial device to a system that use a USB interface. To attach the USB-4604B/4604BM to a PC, you don't need to open the chassis or power down your PC. Instantly get extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the USB-4604B/4604BM especially suitable for modems, printers, POS systems and industrial control devices. 
Supporting USB2.0 high speed, USB-4604B/4604BM features several powerful functions such as high-speed 921.6 kbps transmission, support for various operating systems, independent RS-232/422/485 ports and more. By simply plugging in a USB hub, USB-4604B and USB-4604BM eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.
Specifications
Part Number USB-4604B-AE
General Serial DB9
USB Type B
Display Interface USB 1.1/2.0
Protection Isolation -
Surge 2500 VDC
Serial Ports 4
Type RS-232
Software Baud Rate 50 ~ 921.6 Kbps
Driver Windows 2000/XP/2003, 
CE5.0

ADAM-4562

1-port Isolated USB to RS-232 Converter


Main Features

  • Full compliance with USB V1.1 specifications
  • Transmission speed up to 115.2 kbps
  • Isolation protection 3000 VDC provided
  • Automatic RS-485 data flow control
  • No external power supply necessary; the hub derives its power from the USB port
  • Plug & Play installation
  • No additional IRQs or I/O ports required
  • Hot swap function supported
 
Introduction

ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. Thismakes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices. 
Compliant with USB V1.1, ADAM-4561/4562 features several powerful functions such as high-speed 115.2 kbps transmission, support for various operating systems, independentRS-232/422/485 ports and more. By simply plugging in a USB hub, ADAM-4561/4562 eliminates the configuration issues associated with high-priced, older card solutions. Youonly have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort. 
Specifications
Part Number ADAM-4562-AE
General Serial DB9
USB Type B
Display Interface USB 1.1
Protection Isolation 2500 VDC
Surge -
Serial Ports 1
Type RS-232
Software Baud Rate 75 ~ 115.2 Kbps
Driver Windows 98/2000/XP

USB-4604BM

4-port Serial to USB Converter with ESD Surge Protection


Main Features

  • Full compliance with USB V1.1 and V2.0 specifications.
  • RS-232/422/485 port supported
  • Transmission speed up to 921.6 kbps
  • Automatic RS-485 data flow control
  • Bus-powered; no need for external power supply
  • Plug & Play installation
  • No additional IRQs or I/O ports required
  • Hot swap function supported
 
Introduction

USB-4604 series allows PC users to connect a serial device to a system that use a USB interface. To attach the USB-4604B/4604BM to a PC, you don't need to open the chassis or power down your PC. Instantly get extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the USB-4604B/4604BM especially suitable for modems, printers, POS systems and industrial control devices. Supporting USB2.0 high speed, USB-4604B/4604BM features several powerful functions such as high-speed 921.6 kbps transmission, support for various operating systems, independent RS-232/422/485 ports and more. By simply plugging in a USB hub, USB-4604B and USB-4604BM eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.
Specifications
Part Number USB-4604BM-AE
General Serial DB9
USB Type B
Display Interface USB 1.1/2.0
Protection Isolation -
Surge 2500 VDC
Serial Ports 4
Type RS-232/422/485
Software Baud Rate 50 ~ 921.6 Kbps
Driver Windows 2000/XP/2003, 
CE5.0

Contact details

To discuss your industrial automation, instrumentation and controls related problem, or to arrange a site-visit contact us today:
Address
C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
Call us
+92-21-35070751
+92-21-35120816
+92-306-2266507
Send mail @
This email address is being protected from spambots. You need JavaScript enabled to view it.
 

Send us a message