• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

EKI-7626CI

16+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch


Main Features

  • Provides 2 Gigabit Copper/SFP combo port plus 16 Fast Ethernet ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperatures from -40 ~ 75° C
 
Introduction

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7626C comes equipped with 16 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7626C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7626C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7626C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable. 
Specifications
Part Number EKI-7626CI-AE
General Ethernet Connectors 16 x RJ-45 + 2 RJ-45/SFP 
(mini-GBIC) combo ports
Mounting DIN-rail, Wall
I/O Transmission Distance Ethernet: Up to 100 m 
(4-wire Cat.5e, Cat.6 RJ-45 
cable suggested for Gigabit port) 
Gigabit Fiber: Up to 110 km 
(depending on SFP)
Transmission Speed Ethernet: 10/100Mbps Auto-Negotiation 
Gigabit Copper: 10/100/1000 Mbps, 
Auto-Negotiation 
Gigabit Fiber: Up to 1000Mbps
Operating System Operating Temperature -40 ~ 75°C (-40 ~ 167°F)
Power Supply Power Connector 6-pin removable 
screw terminal
Power Input 2 x Unregulated 
12 ~ 48 VDC

 

 

EKI-7629C

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch


Main Features

  • Provides 2 Gigabit Copper/SFP combo port plus 8 Fast Ethernet ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
 
Introduction

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7629C comes equipped with 8 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7629C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7629C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7629C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.
Specifications
Part Number EKI-7629C-AE
Expansion Supported 32-bit PCI 5
PCIex16 1
PCIex4 1
General Certifications CE, FCC, UL/cUL 60950-1
Ethernet Connectors 8 x RJ45 + 2 x RJ-45/SFP combo ports
Mounting DIN-rail, Wall
I/O COM 2 x RS-232
Transmission Distance Ethernet up to 100 m, Fiber up to 110 km
Transmission Speed 10/100/1000Mbps
USB 8 
(2.0)
Memory (Max) 4GB 
DDR2
Network LAN GbE
Operating System Operating Temperature -10 ~ 60°C (14 ~ 140°F)
Power Supply Power Connector 6-pin removable 
screw terminal
Power Input 2 x Unregulated 
12 ~ 48 VDC
Processor Chipset Intel® 
945G
CPU Type Core™ Duo
Max Speed 3.4GHz

 

 

ADAM-6520

5-port Industrial 10/100 Mbps Ethernet Switch


Main Features

  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Supports +10 ~ 30 VDC voltage power input
  • Provides surge (EFT) protection 3000VDC for power line (ADAM-6520L not equipped)
  • Supports 4,000 VDC Ethernet ESD protection (ADAM-6520L not equipped)
  • Provides flexible mounting: DIN-rail, Wall, Stack
  • Supports wide operating temperature range : -40 ~ 85° C (ADAM-6520)
 
Introduction

ADAM-6520 is a 5-port industrial-grade switch with Ethernet connectivity and from 10 to 100 Mbps transfer rates(Auto-negotiation). Just like any other product in the ADAM family, ADAM-6520 can be mounted in three different ways: DIN rail, Wall and Stack. Solid industrial-grade design assures reliable operation in common application areas like: semi-conductor factories, inventory control environments, assembly lines, manufacturing and many more. All modules support a wide voltage range of +10 ~ 30 VDC over the terminal block, and 3,000 VDC surge (EFT) protection ensures that over-voltage is no concern. The wide operating temperature of ADAM-6520 goes from -10 ~ 70°, while ADAM-6520I from -40 ~ 85°. This permits them to be functional in harsh environments. The six inclusive LED indicators make troubleshooting of the modules easier. Each port has a pair of LEDs that indicate link status and port activities. This easily informs users of any collisions, the link status, power failure and data receipts for immediate on-site diagnosis.
Specifications
Part Number ADAM-6520-BE
General Ethernet Connectors 5 x RJ-45
Mounting DIN 35 rail, 
Wall, Stack
I/O Transmission Distance Ethernet up to 100 m
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -10 ~ 70°C (14 ~ 158°F) 
I21 Stack: -10~ 60°C 
(-40 ~ 140°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

EKI-7629CI

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch w/ Wide Temp


Main Features

  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperatures from -40 ~ 75° C
 
Introduction

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7626C comes equipped with 16 x 10/100Base-T(X) fast Ethernet ports and the EKI-7629C comes equipped with 8 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance (< 100 m), or the appropriate replaceable SFP module can be used for the application of wideband uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Between Failures) ensures that the EKI-7626C/7629C will continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7626C/7629C includes a switch controller that can automatically sense transmission speeds (10/100Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can betransmitted properly. Furthermore, the power line of EKI-7626C/7629C supports up to 3,000 VDC surge (EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable. 
Specifications
Part Number EKI-7629CI-AE
General Certifications CE, FCC, UL/cUL 60950-1
Ethernet Connectors 8 x RJ45 + 2 x RJ-45/SFP combo ports
Mounting DIN-rail, Wall
I/O Transmission Distance Ethernet up to 100 m, Fiber up to 110 km
Transmission Speed 10/100/1000Mbps
Operating System Operating Temperature -40 ~ 75°C (-40 ~ 167°F)
Power Supply Power Connector 6-pin removable 
screw terminal
Power Input 2 x Unregulated 
12 ~ 48 VDC

 

 

ADAM-6520I

5-port Industrial 10/100 Mbps Ethernet Switch w/ Wide Operating Temperature


Main Features

  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Supports +10~30 VDC for power input
  • Provides surge protection 3,000 VDC for power line
  • Supports 4,000 VDC Ethernet ESD protection
  • Provides flexible mounting: DIN-rail, Wall, Stack
  • Supports wide operating temperature range: -40 ~ 85° C
 
Introduction

ADAM-6520I is a 5-port industrial-grade switch with Ethernet connectivity and 10/100 Mbps transmission speed. Just like any other in the ADAM® family, ADAM-6520I can be mounted in three different ways: DIN-rail, wall and stack. ADAM-6520I supports wider operating temperature ranges from -40°C up to 85°C while the ADAM-6520 from -10~70°C. 
Specifications
Part Number ADAM-6520I-AE
General Ethernet Connectors 5 x RJ-45
Mounting DIN 35 rail, 
Wall, Stack
I/O Transmission Distance Ethernet up to 100 m
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -40 ~ 85°C (-40 ~ 185°F) 
Stack: -40~ 75°C (-40 ~ 167°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

More Articles ...

  1. ADAM-6520L
  2. ADAM-6521
  3. ADAM-6521S
  4. ADAM-6521/ST
Page 64 of 156

Automotive Industry

The businesses of C&M Engineering provide unique solutions that improve automaker productivity.

 

Food Industry

Food industry applications endure unrelenting production demands that place components under unique operating conditions. Learn more about the innovative solutions from C&M Engineering for the food industry.

Metal Industry

C&M Engineering offers time tested solutions that deliver measurable improvements to production efficiency and profitability for the metals industry.

Mining, Minerals & Cement

Optimize your machines for the highest efficiency and up-time. C&M Engineering gives the best line up of solutions for all your cement and bulk handling needs.

Oil & Gas Industry

The oil and gas industry has strict requirements for safety and reliability. C&M Engineering offers a wide range of solutions that deliver measurable improvements to production safety, efficiency and profitability.

 

Packaging Industry

For the packaging industry, C&M Engineering offers solutions that can improve product quality and yield while reducing cost, waste and downtime.

 

 

 

 

 

 

Fibers & Textile Industry

As an expert in the textiles industry, we offer a range of solutions specificallyfor fiber and textiles manufacturing that can improve your operation at every point.

Beverage Industry

With high-speeds and wet conditions, beverage production applications can be hard on components. C&M Engin- eering offers a wide range of solutions to keep beverage production lines moving.