• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-5000/485

4-slot Distributed DA&C System Based on RS-485


Main Features

  • RS-485 Communication for easy installation and networking
  • 4 or 8 slots for up to 128 points data monitoning card control in one module
  • Extensive software support; Windows DLL, OCX, OPC server and popular HMI/SCADA software drivers
  • Seamlessly integrated with easy-to-use ADAMView data acquisition software
  • Supports ADAM ASCII protocol or ModbusR/RTU protocol
  • Supports Modbus/RTU protocol with user-defined Modbus address
  Datasheet (PDF)
Introduction

The ADAM-5000/485 and ADAM-5000E systems conform to the EIA RS-485 communication standard. This is the industry's most widely used, balanced, bidirectional transmission line standard. RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances.
Specifications
Part Number ADAM-5000/485-AE
Communications Communication 2500 VDC
Max.Nodes Depend on IP 
address
Protocol ADAM 
ASCII/Modbus 
Protocol
Control System CPU 80188
OS -
RAM -
Power Supply Power Requirement +10 ~ +30 VDC

ADAM-5000E

8-slot Distributed DA&C System for RS-485


Main Features

  • RS-485 Communication for easy installation and networking
  • 4 or 8 slots for up to 128 points data monitoring card control in one module
  • Extensive software support; Windows DLL, OCX, OPC server and popular HMI/SCADA software drivers
  • Seamlessly integrated with easy-to-use ADAMView data acquisition software
  • Supports ADAM ASCII protocol or Modbus®/RTU protocol
  • Supports Modbus/RTU protocol with user-defined Modbus address
  Datasheet (PDF)
Introduction

The ADAM-5000/485 and ADAM-5000E systems conform to the EIA RS-485 communication standard. This is the industry's most widely used, balanced, bidirectional transmission line standard. RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances.
Specifications
Part Number ADAM-5000E-AE
Communications Communication 3000 VDC
Max.Nodes 128
Protocol ADAM 
ASCII/Modbus 
Protocol
Control System CPU 80188
OS -
RAM -
Power Supply Power Requirement +10 ~ +30 VDC

ADAM-5000/TCP

8-slot Distributed DA&C System Based on Ethernet


Main Features

  • ARM 32-bit RISC CPU
  • 10/100Base-T auto-negotiation high-speed communication port
  • Supports Modbus/TCP for easy integration
  • Supports UDP event handling function
  • Up to 100 m communication distance w/o repeater
  • Allows remote configuration via Ethernet
  • Allows concurrent access for 8 host PCs
  • 4 I/O slots for up to 64 points and 8 I/O slots for up to 128 points data monitoring and control
  • 1500 VDC isolation for Ethernet communication
  • Built-in watchdog timer for system auto-reset
  • Windows utility
  • Provides ActiveX drivers to develop applications
  Datasheet (PDF)
Introduction

ADAM-5000L/TCP and ADAM-5000/TPC are both Ethernet-based I/O systems. Without a repeater, ADAM-5000L/TCP and ADAM-5000/TCP can cover a communication distance up to 100 m. This allows remote configuration via Ethernet and eight PCs can simultaneously access the data. The ADAM-5000L/TCP and ADAM-5000/TCP are the solutions for easy configuration and efficient management. It is an ideal and cost-effective solution for eAutomation architecture.
Specifications
Part Number ADAM-5000/TCP-BE
Communications Communication RS-485: 1500 VDC 
Ethernet: 3000 VDC
Max.Nodes Depend on IP 
address
Protocol Modbus/TCP
Control System CPU RISC CPU
OS real-time 
OS
RAM 4 MB
Power Supply Power Requirement +10 ~ +30 VDC

ADAM-5000L/TCP

4-slot Distributed DA&C System for Ethernet


Main Features

  • ARM 32-bit RISC CPU
  • 10/100Base-T auto-negotiation high-speed communication port
  • Supports Modbus/TCP for easy integration
  • Supports UDP event handling function
  • Up to 100 m communication distance w/o repeater
  • Allows remote configuration via Ethernet
  • Allows concurrent access for 8 host PCs
  • 4 I/O slots for up to 64 points and 8 I/O slots for up to 128 points data monitoring and control
  • 1500 VDC isolation for Ethernet communication
  • Built-in watchdog timer for system auto-reset
  • Windows utility
  • Provides .NET Class LIB to develop applications
  Datasheet (PDF)
Introduction

ADAM-5000L/TCP and ADAM-5000/TPC are both Ethernet-based I/O systems. Without a repeater, ADAM-5000L/TCP and ADAM-5000/TCP can cover a communication distance up to 100 m. This allows remote configuration via Ethernet and eight PCs can simultaneously access the data. The ADAM-5000L/TCP and ADAM-5000/TCP are the solutions for easy configuration and efficient management. It is an ideal and cost-effective solution for eAutomation architecture.
Specifications
Part Number ADAM-5000L/TCP-AE
Communications Communication RS-485: 1500 VDC 
Ethernet: 3000 VDC
Max.Nodes Depend on IP 
address
Protocol Modbus/TCP
Control System CPU RISC CPU
OS real-time 
OS
RAM 4 MB
Power Supply Power Requirement +10 ~ +30 VDC

More Articles ...

  1. ADAM-5510
  2. ADAM-5510/TCP
  3. ADAM-5510E
  4. ADAM-5510E/TCP
Page 77 of 156

Automotive Industry

The businesses of C&M Engineering provide unique solutions that improve automaker productivity.

 

Food Industry

Food industry applications endure unrelenting production demands that place components under unique operating conditions. Learn more about the innovative solutions from C&M Engineering for the food industry.

Metal Industry

C&M Engineering offers time tested solutions that deliver measurable improvements to production efficiency and profitability for the metals industry.

Mining, Minerals & Cement

Optimize your machines for the highest efficiency and up-time. C&M Engineering gives the best line up of solutions for all your cement and bulk handling needs.

Oil & Gas Industry

The oil and gas industry has strict requirements for safety and reliability. C&M Engineering offers a wide range of solutions that deliver measurable improvements to production safety, efficiency and profitability.

 

Packaging Industry

For the packaging industry, C&M Engineering offers solutions that can improve product quality and yield while reducing cost, waste and downtime.

 

 

 

 

 

 

Fibers & Textile Industry

As an expert in the textiles industry, we offer a range of solutions specificallyfor fiber and textiles manufacturing that can improve your operation at every point.

Beverage Industry

With high-speeds and wet conditions, beverage production applications can be hard on components. C&M Engin- eering offers a wide range of solutions to keep beverage production lines moving.