• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-5030

2-slot SD Storage Module


Main Features

  • Storage Type: SD (Secure Digital Card)
  • USB Type: USB Rev 2.0 (Compliant)
  • USB Number: 2, SD Card Number: 2
  • Max Storage: 1GB x 2
  • Interface: PCI Bus
  • Format: FAT-16
  • Operating Temperature: 0 ~ 60° C (32 ~ 140° F)
  Datasheet (PDF)
Introduction

ADAM-5030 is a 2-slot secure digital card storage module that provides 2 USB ports and 2 SD slots. It is fully compliant with USB 2.0 and FAT16 and is also low power consuming, at only 0.5W. According the volume of SD Card, you can extend the memory of your controller up 2 GB. Unlike commercial modules, it is very rugged, and has a very long lifecycle.
Specifications
Part Number ADAM-5030-AE
Control System Supported Controller ADAM-5550KW
General Connectors N/A
Wiring Board -
Storage Channel 2
Size 2 GB (Max)
Type SD (Secure Digital Card)
USB Channel +10 ~ +30 VDC 2
Type V2.0 (compliant)

ADAM-5202

2-port AMONet Master Module


Main Features

  • Communication Slave: 2 Rings with Max. 128 (1 Ring with 64 slaves) Module Number
  • Communication: Max. 100 m (20 Mbps/32 slave modules) or 50 m (20 Mbps/64 slave modules) Distance
  • Serial Interface: Half duplex RS-485 with transformer isolation
  • Surge Protection: 10 kV
  • Transmission Speed: 2.5, 5, 10 or 20 Mbps with automatic data flow control
  • Remote motion and remote IO function
  • LED Indictors: Active, Error (Each Port)
  • Operating Temperature: 0 ~ 50° C (32 ~ 140° F)
  Datasheet (PDF)
Introduction

ADAM-5202 is a 2-ring AMONet module that provides 128 maximum slaves and supports 100-meter long distance communications. The transmission speed can support 2.5, 5, 10 or 20 Mbps with automatic data flow control. It accepts half duplex RS-485 serial interfaces with transformer isolation. This module can also function as a motion module for AMONet Master Control.
Specifications
Part Number ADAM-5202-AE
Control System Supported Controller ADAM-5550KW
General Connectors 2 x RJ45
Wiring Board AMAX-3752F, AMAX-3754F, 
AMAX-3756F
Storage Channel -
Size -
Type -
USB Channel -
Type -

PWR-242

DIN-rail Power Supply


Main Features

  • Input short protection
  • Output overload protection
  • Operation temperature: 0~50 ℃
  Datasheet 
Introduction

DIN-Rail Power Supply

ADAM-5240

4-axis Stepping/Pulse-type Servo Motor Control Module


Main Features

  • High-speed 4-axis stepping/pulse-type servo motion control
  • Hand wheel and jog function
  • 2/3-axis linear interpolation function
  • 2-axis circular interpolation function
  • Continuous interpolation function
  • Programmable T/S-curve acceleration/deceleration rate
  • Up to 4 MPPS output for each axis
  • Two pulse output types: CW/CCW or Pulse/Direction
  • Up to 1 MHz encoder input for each axis
  • Two encoder pulse input types: A/B phase or Up/Down
  • Position management and software limit switch function
  Datasheet (PDF)
Introduction

Advantech's Industrial Automation Group introduces the ADAM-5240, a 4-axis Stepping/Pulse-type Servo Motor Control Module for use with ADAM-5550 Series PACs (Programmable Automation Controllers). ADAM-5240 is is fully integrated to fulfill general purpose motion applications. Equipped with high speed 4-axis motion control module that simplifies stepping and pulse-type servo motor control, ADAM-5240 provides advanced performance.
Specifications
Part Number ADAM-5240-AE
Control System Supported Controller ADAM-5550KW
General Connectors 100-pin SCSI-II
Wiring Board ADAM-3952, ADAM-3952J2S
Storage Channel -
Size -
Type -
USB Channel -
Type -

More Articles ...

  1. PWR-244
  2. RS-485 I/O Modules: ADAM-4000
  3. Wireless I/O Modules: ADAM-2000
  4. Robust Remote I/O Modules
Page 86 of 156

Automotive Industry

The businesses of C&M Engineering provide unique solutions that improve automaker productivity.

 

Food Industry

Food industry applications endure unrelenting production demands that place components under unique operating conditions. Learn more about the innovative solutions from C&M Engineering for the food industry.

Metal Industry

C&M Engineering offers time tested solutions that deliver measurable improvements to production efficiency and profitability for the metals industry.

Mining, Minerals & Cement

Optimize your machines for the highest efficiency and up-time. C&M Engineering gives the best line up of solutions for all your cement and bulk handling needs.

Oil & Gas Industry

The oil and gas industry has strict requirements for safety and reliability. C&M Engineering offers a wide range of solutions that deliver measurable improvements to production safety, efficiency and profitability.

 

Packaging Industry

For the packaging industry, C&M Engineering offers solutions that can improve product quality and yield while reducing cost, waste and downtime.

 

 

 

 

 

 

Fibers & Textile Industry

As an expert in the textiles industry, we offer a range of solutions specificallyfor fiber and textiles manufacturing that can improve your operation at every point.

Beverage Industry

With high-speeds and wet conditions, beverage production applications can be hard on components. C&M Engin- eering offers a wide range of solutions to keep beverage production lines moving.