• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

Programmable Device Servers

Advantech's EKI-1100 Industrial RISC-based Communication Controller comes with versatile peripherals interfaces, communication capabilities, and storage expandability. The EKI-1100 uses the ultra-low power ARM7 processor or Intel Xcale processor and it is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in Flash ROM and SDRAM provide user enough storage to run their specific applications.

Product
Model Number Description
EKI-1121L   1-port Programmable Device Server
 
EKI-1122L   2-port Programmable Device Server

 

 

Advantech Serial Device Servers

Advantech's Serial Device Servers are easy to install and configure, support wired and wireless networking and provide various operation modes to satisfy rigorous industrial automation needs. EKI-1000 Serial Device Servers enable RS-232/422/485 serial devices to be dual-connected to Ethernet switches for unrivaled reliability. Product line covers wired and wireless (WLAN, GPRS, 3G) serial device server, modbus gateway, and programmable device server.

Product Catagories

Serial Device Servers

The serial device servers enable RS-232/422/485 serial devices to be connected to a host computer over an Ethernet network quickly and cost-effectively. No extra programming effort is required at the host computer, so software development costs can be saved. Serial device servers are especially suitable for remotely controlling and monitoring your serial devices via the Ethernet.

Modbus Gateway

The Modbus Serial Device Server as an interface between Modbus serial devices and computer hosts running Modbus/TCP on Ethernet networks. Fully compliant with Modbus/TCP, the Modbus Serial Device Server offers a convenient solution to connect existing devices or controllers running Modbus serial protocol (Modbus/ASCII or Modbus/RTU) to an Ethernet network.

Programmable Device Servers

Advantech's EKI-1100 Industrial RISC-based Communication Controller comes with versatile peripherals interfaces, communication capabilities, and storage expandability. The EKI-1100 uses the ultra-low power ARM7 processor or Intel Xcale processor and it is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in Flash ROM and SDRAM provide user enough storage to run their specific applications.

PCI-1601A

2-port RS-422/485 PCI Comm Card
pci-1601a


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 kbps
  • 2-port RS-422/485 interface
  • I/O address automatically assigned by PCI Plug & Play
  • OS support: Windows® 98/ME/2000/XP
  • Interrupt status register for increased performance
  • Space reserved for termination resistors
  • Automatic RS-485 data flow control
  • Powerful and easy-to use utility (ICOM Tools)
  • Optional EFT Surge protection
  • Optional isolation protection for RS-422/485
 
Introduction

PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFT surge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility software and more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable for multitasking environments. 
PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability, both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also provides a convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards.
Specifications
Part Number PCI-1601A-AE
Communication
<br>Interfaces		 CAN -
Current Loop -
RS-232 -
RS-422 V
RS-485 V
Display Ports 2
Network Cable 
Connector 
Type		 N/A
Protection Isolation -
Surge -

 

 

EKI-1121L

1-port Programmable Device Server


Main Features

  • ARM7 32-bit 80MHz processor
  • 8MB Flash ROM on board
  • 16MB SDRAM
  • 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  • 1 or 2 software selectable RS-232/422/485 serial ports
  • 50 bps to 921.6 kbps baud rate
  • Built-in real-time clock (RTC)
  • Class I, Division 2 certification
  • Pre-installed Linux Kernel 2.4 platform
 
Introduction

EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications. 
Specifications
Part Number EKI-1121L-AE
Ethernet Interface Connector RJ-45
LAN 2 x auto-sensing 10/100 Mbps ports
Serial Interface Connector D-sub 9 male
Serial Standards Software selectable RS-232/422/485 ports
Software (uClinux) Kernel Version 2.4.31
Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
System CPU ARM7 32-bit RISC CPU, 80 MHz
Flash 8 MB
OS (pre-installed) uClinux
SDRAM 16 MB

PCI-1601B

2-port RS-422/485 PCI Communication Card w/EFT
pci-1601b


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 kbps
  • 2-port RS-422/485 interface
  • I/O address automatically assigned by PCI Plug & Play
  • OS support: Windows® 98/ME/2000/XP
  • Optional EFT Surge protection
  • Interrupt status register for increased performance
  • Space reserved for termination resistors
  • Automatic RS-485 data flow control
  • Powerful and easy-to use utility (ICOM Tools)
  • Optional isolation protection for RS-422/485
 
Introduction

PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFTsurge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility softwareand more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable formultitasking environments. 
PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability,both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also providesa convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards.
Specifications
Part Number PCI-1601B-AE
Communication
<br>Interfaces		 CAN -
Current Loop -
RS-232 -
RS-422 V
RS-485 V
Display Ports 2
Network Cable
Connector 
Type		 N/A
Protection Isolation -
Surge 2500 VDC

 

 

More Articles ...

  1. PCI-1602A
  2. PCI-1602B
  3. PCI-1603
  4. PCI-1610A
Page 10 of 156

Automotive Industry

The businesses of C&M Engineering provide unique solutions that improve automaker productivity.

 

Food Industry

Food industry applications endure unrelenting production demands that place components under unique operating conditions. Learn more about the innovative solutions from C&M Engineering for the food industry.

Metal Industry

C&M Engineering offers time tested solutions that deliver measurable improvements to production efficiency and profitability for the metals industry.

Mining, Minerals & Cement

Optimize your machines for the highest efficiency and up-time. C&M Engineering gives the best line up of solutions for all your cement and bulk handling needs.

Oil & Gas Industry

The oil and gas industry has strict requirements for safety and reliability. C&M Engineering offers a wide range of solutions that deliver measurable improvements to production safety, efficiency and profitability.

 

Packaging Industry

For the packaging industry, C&M Engineering offers solutions that can improve product quality and yield while reducing cost, waste and downtime.

 

 

 

 

 

 

Fibers & Textile Industry

As an expert in the textiles industry, we offer a range of solutions specificallyfor fiber and textiles manufacturing that can improve your operation at every point.

Beverage Industry

With high-speeds and wet conditions, beverage production applications can be hard on components. C&M Engin- eering offers a wide range of solutions to keep beverage production lines moving.