MITSUBISHI Fx series

CPU
Digital Module
Analog Module
HSC/Positioning
Communication

FX PLC Main Unit

A wide lineup in FX series offers you many choices to fit to your budget and application.
You are sure to find a model that fulfills your needs.

FX Series Lineup
For high speed, high functionality, and expandability	Memory 64,000 step RAM memory built-in. Flash memory cassette can also be mounted. Processing speed Basic instruction: 0.065 μs/instruction (LD instruction) Application instruction: 0.642 to 100 μs/instruction Device Auxiliary relay: 7,680 pts Timer: 512 pts Counter: 235 pts Data register: 8,000 pts Extension register: 32,768 pts Extension file register (optional memory): 32,768 pts Application instruction List of supported application instructions
For high speed, reduced wiring, reduced space	Memory 64,000 step RAM memory built-in. Flash memory cassette can also be mounted. Processing speed Basic instruction: 0.065 μs/instruction (LD instruction) Application instruction: 0.642 to 100 μs/instruction Device Auxiliary relay: 7,680 pts Timer: 512 pts Counter: 235 pts Data register: 8,000 pts Extension register: 32,768 pts Extension file register (optional memory): 32,768 pts Application instruction List of supported application instructions
For communication, analog expansions, and up to 256 I/O control	Memory 32,000 step EEPROM memory built-in. Battery-free and maintenance-free. Processing speed Basic instruction: 0.21μs/instruction (in standard mode) 0.42μs/instruction (in extension mode) Application instruction: 0.5 to 100 μs/instruction (in standard mode) 1.2 to 100 μs/instruction (in extension mode) Device Auxiliary relay: 7,680 pts Timer: 320 pts Counter: 235 pts Data register: 8,000 pts Extension register: 24,000 pts Extension file register: 24,000 pts Application instruction List of supported application instructions 1: 14pt, 24pt models can only connect 1 board 2: 14pt, 24pt models have 2 independent axes
For reduced space and reduced wiring	Memory 32,000 step EEPROM memory built-in. Battery-free and maintenance-free. Processing speed Basic instruction: 0.21 μs/instruction (in standard mode) 0.42 μs/instruction (in extension mode) Application instruction: 0.5 to 100 μs/instruction (in standard mode) 1.2 to 100 μs/instruction (in extension mode) Device Auxiliary relay: 7,680 pts Timer: 320 pts Counter: 235 pts Data register: 8,000 pts Extension register: 24,000 pts Extension file register: 24,000 pts Application instruction List of supported application instructions
For communication, analog expansions, and low cost	Memory 16,000 step EEPROM memory built-in. Battery-free and maintenance-free. (Program capacity is 4,000 steps) Processing speed Basic instruction: 0.21 μs/instruction Application instruction: 0.5 to 100μs/instruction Device Auxiliary relay: 1,536 pts Timer: 138 pts Counter: 67 pts Data register: 3,000 pts Application instruction List of supported application instructions

Explanation of the icons
	Depending on control points, total 256 I/O extension devices can be connected. *Includes CC-Link remote I/O
	FX3U/FX3UC can count at high speed input frequency 100kHz (1-phase 6pts), 50kHz (2-phase 2pts), 10kHz (1-phase 2pts).
	Depending on control points, total 384 I/O extension devices can be connected. *Includes CC-Link remote I/O
	FX3S/FX3GC has 2 axes simple positioning function built into the main unit.
	Depending on the purpose, various special function blocks can be connected.
	FX3G/FX3U/FX3UChas 3 axes simple positioning built into the main unit. *FX3G 14 pt, 24 pt models have independent 2 axes.
	Function can be easily added by mounting a function expansion board to the main unit.
	I/O can be connected in connector format, reducing wiring effort.
	In FX3UC-32MT-LT, CC-Link/LT master functionality is built-in.
	1 phase: 60 kHz x 4 pts/ 10 kHz x 2 pts 2 phase: 30 kHz x 2 pts/ 5 kHz 1 pt
	1 phase: 60 kHz x 2 pts/ 10 kHz x 4 pts 2 phase: 30 kHz x 1 pt/ 5 kHz 1 pt
	In FX3S-30MR/ES-2AD, FX3S-30MT/ES-2AD, and FX3S-30MT/ESS-2AD, 2ch analog input (current input) function is built-in.

Extension units

Powered extension units are I/O extension devices with built-in power supply.

Like with the main unit, various I/O devices and special devices can be connected after a powered extension unit.

Model		Total number of points	Number of input/output points Input/output type				Applicable FX PLC
Model		Total number of points	Input		Output		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
AC Power Type
	FX2N-32ER	32 points	16 points	24 V DC (sink)	16 points	Relay	×	○	○	×	×
	FX2N-32ER-ES/UL			24 V DC (sink/ source)		Relay
	FX2N-32ES			24 V DC (sink)		Triac
	FX2N-32ET			24 V DC (sink)		Transistor (sink)
	FX2N-32ET-ESS/UL			24 V DC (sink/ source)		Transistor (source)
	FX2N-48ER	48 points	24 points	24 V DC (sink)	24 points	Relay	×	○	○	×	×
	FX2N-48ER-ES/UL			DC24V (sink/ source)		Relay
	FX2N-48ET			24 V DC (sink)		Transistor (sink)
	FX2N-48ET-ESS/UL			24 V DC (sink/ source)		Transistor (source)
	FX2N-48ER-UA1/UL	48 points	24 points	100 V AC	24 points	Relay	×	○	○	×	×
DC Power Type
	FX2N-48ER-D	48 points	24 points	24 V DC (sink)	24 points	Relay	×	○	○	×	×
	FX2N-48ER-DS			24 V DC (sink/ source)		Relay
	FX2N-48ET-D			24 V DC (sink)		Transistor (sink)
	FX2N-48ET-DSS			24 V DC (sink/ source)		Transistor (source)

Regarding connection cable

A connection cable (length: 55mm), used to connect to the the right side of the device in front of the powered extension unit, is included with the powered extension unit.
To extend the distance of the connection, please use the optional "extension cable".

Function expansion board

The expansion board is designed to add the input and output terminal whose points are small to FX3S or FX3G PLCs. The board can be built in the PLC.

Model		Total number of points	Number of input/output points Input/output type				Applicable FX PLC
Model		Total number of points	Input		Output		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3G-4EX-BD	4 points	4 points	24 V DC (sink/ source)	-	-	*1 ○ Max. 1 unit	*2 ○ Max. 1 unit	×	×	×
	FX3G-2EYT-BD	2 points	-	-	2 points	Transistor (sink/ source)	*1 ○ Max. 1 unit	*2 ○ Max. 1 unit	×	×	×

*1: Supported by FX3S ver.1.10 and later.

*2: Supported by FX3G ver.2.20 and later.

Extension blocks

Extension block is an I/O extension device that receives power from the main unit or powered extension unit.

It can be connected in 8 point or 16 point units. The connectable number of points is determined by each main unit or powered extension unit

Model		Total number of points	Number of input/output points Input/output type				Applicable FX PLC
Model		Total number of points	Input		Output		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
Input/output extension blocks
	FX2N-8ER	8 points	4 points (8 devices are occupied.)	24 V DC (sink)	4 points (8 devices are occupied.)	Relay	×	○	○	1 2 ○	1 2 ○
	FX2N-8ER-ES/UL		4 points (8 devices are occupied.)	DC24V (sink/ source)	4 points (8 devices are occupied.)	Relay
	FX2N-8EX		8 points	24 V DC (sink)	-	-
	FX2N-8EX-ES/UL			DC24V (sink/ source)
	FX2N-8EX-UA1/UL			100 V AC
	FX2N-16EX	16 points	16 points	24 V DC (sink)			×	○	○	1 2 ○	1 2 ○
	FX2N-16EX-ES/UL			24 V DC (sink/ source)
	FX2N-16EX-C Connector input			24 V DC (sink)
	FX2N-16EXL-C Connector input			5 V DC
Output extension blocks
	FX2N-8EYR	8 points	-	-	8 points	Relay	×	○	○	1 2 ○	1 2 ○
	FX2N-8EYR-ES/UL					Relay
	FX2N-8EYR-S-ES/UL					Relay (8 points/common)
	FX2N-8EYT					Transistor (sink)
	FX2N-8EYT-H					Transistor (sink)
	FX2N-8EYT-ESS/UL					Transistor (source)
	FX2N-16EYR	16 points			16 points	Relay	×	○	○	1 2 ○	1 2 ○
	FX2N-16EYR-ES/UL					Relay
	FX2N-16EYS					Triac
	FX2N-16EYT					Transistor (sink)
	FX2N-16EYT-ESS/UL					Transistor (source)
	FX2N-16EYT-C Connector output					Transistor (sink)

*1 :For connection to FX3GC or FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

*2 :Depending on the model name of the main unit, I/O extension device connection may or may not be allowed. For details, refer to the manual of the main unit.

Regarding connection cable

A connection cable, used to connect to the right side of the device in front of the extension block, is included with the extension block.

To extend the distance of the connection, please use the optional "extension cable (FX0N-30EC/FX0N-65EC)" and "connector conversion adapter (FX2N-CNV-BD)".

Extension block for connector type main unit (FX3GC, FX3UC)

These I/O extension devices can be directly connected to FX1NC, FX3GC, FX2NC, FX3UC PLCs.

They can be compactly extended because connection cables are not needed.

Model		Total number of points	Number of input/output points Input/output type				Applicable FX PLC
Model		Total number of points	Input		Output		FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
Input extension blocks
	FX2NC-16EX-T Terminal block input	16 points	16 points	24 V DC (sink)	-	-	×	×	×	* ○	* ○
	FX2NC-16EX-T-DS Terminal block input			DC24V (sink/ source)
	FX2NC-16EX			DC24V (sink)
	FX2NC-16EX-DS			DC24V (sink/ source)
	FX2NC-16EX-D/UL			DC24V (sink)
	FX2NC-32EX	32 points	32 points	24 V DC (sink)
	FX2NC-32EX-DS			DC24V (sink/ source)
	FX2NC-32EX-D/UL			DC24V (sink)
Output extension blocks
	FX2NC-16EYR-T Terminal block Output	16 points	-	-	16 points	Relay	×	×	×	* ○	* ○
	FX2NC-16EYR-T-DS Terminal block output					Relay
	FX2NC-16EYT					Transistor (sink)
	FX2NC-16EYT-DSS					Transistor (source)
	FX2NC-16EYT-D/UL					Transistor (sink)
	FX2NC-32EYT	32 points			32 points	Transistor (sink)
	FX2NC-32EYT-DSS					Transistor (source)
	FX2NC-32EYT-D/UL					Transistor (sink)
Input/output extension blocks
	FX2NC-64ET	64 points	32 points	24 V DC (sink)	32 points	Transistor (sink)	×	×	×	* ○	* ○

*: Depending on the model name of the main unit, I/O extension device connection may or may not be allowed. For details, refer to the manual of the main unit

Analog expansion board (A/D conversion, D/A conversion)

Model
(Number of channels)

Input specifications

Applicable FX PLC

Item

Input voltage

Input current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX3G-2AD-BD
(Input 2 ch)

Input
range

0 to 10 V DC
(Input resistance 198.7 kΩ)

4 to 20 mA DC
(Input resistance 250 Ω)

*3
○
Max.
1 unit

*1*2
○
Max.
2 units

Resolution

2.5 mV
(10 V/4000)

8 μA
{(20 - 4 mA)/2000}

FX3G-1DA-BD
(Output 1 ch)

Output
range

0 to 10 V DC
(External load resistance value
2 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
500 Ω or less)

*3
○
Max.
1 unit

*1*2
○
Max.
2 units

Resolution

2.5 mV
(10 V/4000)

8 μA
{(20 - 4 mA)/2000}

*1: Supported by FX3G ver. 1.10 and later.
*2: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*3: Function expansion board and FX3S-CNV-ADP cannot be used together.

Mixed Analog Input/Output (A/D conversion, D/A conversion)

Model
(Number of channels)

Input/output specifications

Applicable FX PLC

Item

Input/output voltage

Input/output current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX3U-3A-ADP
(Input 2 ch)
(Output 1ch)

Input
range

0 to 10 V DC
(Input resistance
198.7 kΩ)

4 to 20 mA DC
(Input resistance 250 Ω)

*7
○
Max.
1 unit

*1*6
○
Max.
2 units

*2
○
Max.
4 units

○
Max.
2 units

*3
○
Max.
4 units

Output
range

0 to 10 V DC
(External load resistance value
5 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
500 Ω or less)

Resolution

[Input voltage]
2.5 mV (10 V/4000)
[Output voltage]
2.5 mV (10 V/4000)

[Input current]
5 μA (16 mA/3200)
[Onput current]
4 μA (16 mA/4000)

FX2N-5A
(Input 4 ch)
(Output 1ch)

Input
range

-100 to 100 mV DC
-10 to 10 V DC
(Input resistance 200 kΩ)

-20 to 20 mA DC
4 to 20 mA DC
(Input resistance 250 Ω)

○
Max.
8 units

*4*5
○
Max.
8 units

Output
range

-10 to 10 V DC
(External load resistance value
2 kΩ to 1 MΩ)

0 to 20 mA DC,
4 to 20 mA DC
(External load resistance value
500 Ω or less)

Resolution

50 μV
(at ±100 mV)
312.5 μV
(at ±10 V)

1.25 μA，10 μA
((depending on
mode used))

*1: Supported by FX3G ver.1.20 and later. For connection to FX3G, FX3G-CNV-ADP is required.
*2: Supported by FX3U ver.2.61 and later. For connection to FX3U, function expansion board is required.
*3: Supported by FX3UC ver.2.61 and later. When connecting to FX3UC- 32MT-LT(-2), function expansion board is required.
*4: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC- 1PS-5V is required.
*5: FX3UC- 32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC- **MT/DSS, FX3UC-16MR/D (S)-T: 8 units.
*6: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*7: For connection to FX3S, FX3S-CNV-ADP is required.

Analog Input (A/D conversion)

Model
(Number of channels)

Input specifications

Applicable FX PLC

Item

Input voltage

Input current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX3S-30MR/ES-2AD
FX3S-30MT/ES-2AD
FX3S-30MT/ESS-2AD
(Input 2ch)

Input
range

0 to 10 V DC
(Input resistance 115.7 kΩ)

Resolution

10 mV
(10 V/1000)

FX2N-2AD
(Input 2 ch)

Input
range

0 to 10 V DC,
0 to 5 V DC
(Input resistance 200 kΩ)
The input characteristic is the same for each channel.

4 to 20 mA DC
(Input resistance 250 Ω)
The input characteristic is the same for each channel.

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

2.5 mV
(10 V × 1/4000)
1.25 mV
(5 V × 1/4000)

4 μA
((20 - 4 mA) × 1/4000)

FX3U-4AD
(Input 4ch)

Input
range

-10 to 10 V DC
(Input resistance 200 kΩ)

-20 to 20 mA DC,
4 to 20 mA
(Input resistance 250 Ω)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

0.32 mV
(20 V × 1/64000)

1.25 μA
(40 mA × 1/32000)

FX3U-4AD-ADP
(Input 4ch)

Input
range

0 to 10 V DC
(Input resistance 194 kΩ)

4 to 20 mA DC
(Input resistance 250 Ω)

*8
○
Max.
1 unit

*4*3
○
Max.
2 units

*5
○
Max.
4 units

○
Max.
2 units

*5*6
○
Max.
4 units

Resolution

2.5 mV
(10 V/4000)

10 μA
(16 mA/1600)

FX3UC-4AD
(Input 4ch)

Input
range

-10 to 10 V DC
(Input resistance 200 kΩ)

4 to 20 mA DC,
-20 to 20 mA DC
(Input resistance 250 Ω)

*7*2
○
Max.
8 units

Resolution

0.32 mV
(20 V × 1/64000)
2.50 mV
(20 V × 1/8000)

1.25 μA
(40 mA × 1/32000)
5.0 μA
(40 mA × 1/8000)

FX2N-8AD
(Input 8 ch)

Input
range

-10 to 10 V DC
(Input resistance 200 kΩ)

4 to 20 mA DC
-20 to 20 mA DC
(Input resistance 250 Ω)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

0.63 mV
(20 V × 1/32000)
2.50 mV
(20 V × 1/8000)

2.5 μA
(40 mA × 1/16000)
2 μA
(16 mA × 1/8000)
5.0 μA
(40 mA × 1/8000)
4 μA
(16 mA × 1/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC- 1PS-5V is required.
*2: FX3UC- 32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC- **MT/DSS, FX3UC-16MR/D (S)-T: 8 units.
*3: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, function expansion board is required.
*6: FX3UC- 32MT-LT supported from version 1.20 or later.
*7: FX3UC- 32MT-LT supported from version 1.30 or later.
*8: When connecting to FX3S, FX3S-CNV-ADP is required.

Analog Output (D/A conversion)

Model
(Number of channels)

Output specifications

Applicable FX PLC

Item

Output voltage

Output current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX2N-2DA
(Output 2 ch)

Output
range

0 to 10 V DC,
0 to 5 V DC
(External load resistance value
2 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
400 Ω or less)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

2.5 mV
(10 V × 1/4000)
1.25 mV
(5 V × 1/4000)

4 μA
((20 - 4) mA × 1/4000)

FX3U-4DA
(Output 4 ch)

Output
range

-10 to 10 V DC
(External load resistance value
1 kΩ to 1 MΩ)

0 to 20 mA DC
4 to 20 mA DC
(External load resistance value
500 Ωor less)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

0.32 mV
(20 V × 1/64000)

0.63 μA
(20 mA × 1/32000)

FX3U-4DA-ADP
(Output 4 ch)

Output
range

0 to 10 V DC
(External load resistance value
5 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
500 Ω or less)

*7
○
Max.
1 unit

*3*4
○
Max.
2 units

*5
○
Max.
4 units

○
Max.
2 units

*5*6
○
Max.
4 units

Resolution

2.5 mV
(10 V/4000)

4 μA
(16 mA/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC- 1PS-5V is required.
*2: FX3UC- 32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC- **MT/DSS, FX3UC-16MR/D (S)-T: 8 units.
*3: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, FX3UC-32MT-LT(-2), function expansion board is required.
*6: FX3UC- 32MT-LT supported from version 1.20 or later.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.

High speed counter block/adapter

Model
(Number of channels)

Type

Highest response
frequency

Hardware comparison
output function

2-phase counter
edge count function

Applicable FX PLC

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX2N-1HC
(1ch)

1-phase
1-count

Max. 50 kHz

○

○
Max.
8 units

*2*3
○
Max.
8 units

1-phase
2-count

Max. 50 kHz

2-phase
2-count

1 edge count:
Max. 50 kHz
2 edge count:
Max. 25 kHz
4 edge count:
Max. 12.5 kHz

○

FX3U-2HC
(2ch)

1-phase
1-count

Max. 200 kHz

○

○
Max.
8 units

*2
○
Max.
4 units

1-phase
2-count

Max. 200 kHz

2-phase
2-count

1 edge count:
Max. 200 kHz
2 edge count:
Max. 100 kHz
4 edge count:
Max. 50 kHz

○

FX2NC-1HC
(1ch)

1-phase
1-count

Max. 50 kHz

○

*3
○
Max.
8 units

1-phase
2-count

Max. 50 kHz

2-phase
2-count

1 edge count:
Max. 50 kHz
2 edge count:
Max. 25 kHz
4 edge count:
Max. 12.5 kHz

○

FX3U-4HSX-ADP
(4ch)

1-phase
1-count

Max. 200 kHz

○

*1
○
Max.
2 units

1-phase
2-count

Max. 200 kHz

2-phase
2-count

1 edge count:
Max. 100 kHz
4 edge count:
Max. 100 kHz

*1: When used together with analog or communication adapters, function expansion board is required.
*2: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

High-speed output special adapter

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-2HSY-ADP	Independent two axes	200kHz	×	×	* ○ Max. 2 units	×	×

*: When used together with analog or communication adapters, function expansion board is required

Pulse output block

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-1PG	Independent one axis	200kHz	×	×	*3 ○ Max. 8 units	×	13 ○ Max. 6 units
	FX2N-10PG	Independent one axis	1MHz(1 Hz to 1 MHz differential line driver output)	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.
*3: FX3U, FX3UC supported from version 2.20 or later.

SSCNET

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-20SSC-H	Ｔwo axes (Independent/Simultaneous)	-	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

Positioning dedicated unit

Model		Number of controlled axis	Maximum requency	Applicable FX PLC
Model		Number of controlled axis	Maximum requency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX2N-10GM	Independent one axis	200kHz	×	×	○ Max. 8 units	×	12 ○ Max. 8 units
	FX2N-20GM	Two axes (Independent/Simultaneous)	200kHz	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

Fx Communication

High-speed output special adapter

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-2HSY-ADP	Independent two axes	200kHz	×	×	* ○ Max. 2 units	×	×

*: When used together with analog or communication adapters, function expansion board is required

Pulse output block

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-1PG	Independent one axis	200kHz	×	×	*3 ○ Max. 8 units	×	13 ○ Max. 6 units
	FX2N-10PG	Independent one axis	1MHz(1 Hz to 1 MHz differential line driver output)	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

SSCNET

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-20SSC-H	Ｔwo axes (Independent/Simultaneous)	-	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

Positioning dedicated unit

Model		Number of controlled axis	Maximum requency	Applicable FX PLC
Model		Number of controlled axis	Maximum requency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX2N-10GM	Independent one axis	200kHz	×	×	○ Max. 8 units	×	12 ○ Max. 8 units
	FX2N-20GM	Two axes (Independent/Simultaneous)	200kHz	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units

For FX2N-10GM/FX2N-20GM positioning teaching panel

Model	Product
E-20TP-SET0 (with E-20TP-CAB0)	FX2N-10GM, FX2N-20GM
E-20TP-E-SET0 (with E-20TP-CAB0)	FX2N-10GM, FX2N-20GM

Angle control unit

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX2N-1RM-SET*1	One axis	720 divisions/rotation (0.5 degree) or 360 divisions/rotation (1 degree)	×	×	○ Max. 3 units	×	23 ○ Max. 3 units
	FX2N-1RM-E-SET*1	One axis		×	×	○ Max. 3 units	×	23 ○ Max. 3 units

*1: FX2N-1RM-SET is a Japanese domestic only product. For use overseas, please select FX2N-1RM-E-SET, which supports overseas standards.
*2: Extension cable cannot be used.
*3: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

PLC built-in pulse output functions and positioning functions

Items		FX3S	FX3G，FX3GC	FX3U，FX3UC
Number of axis		Two axes	[FX3G] 　Two axes (14/24 points) 　Three axes (40/60 points) [FX3GC] 　Two axes	Three axes
Number of controlled axis		Independent two axes	[FX3G] 　Independent two axes (14/24 points) 　Independent three axes (40/60 points) [FX3GC] 　Independent two axes	Independent three axes
Maximum frequency		100 kHz	100 kHz	100 kHz
Programming languages		Sequence programs	Sequence programs	Sequence programs
Compatible main unit		Transistor output type main unit	Transistor output type main unit	Transistor output type main unit
Pulse output instruction	Pulse Y Output (PLSY)	○	○	○
	Acceleration/Deceleration Setup Pulse Y Output (PLSR)	○	○	○
	Pulse output type	Pulse train (Direction is controlled by PLC program)	Pulse train (Direction is controlled by PLC program)	Pulse train (Direction is controlled by PLC program)
Positioning instruction	Absolute Current Value Read ([D]ABS)	○	○	○
	Dog Search Zero Return (DSZR)	○	○	○
	Zero Return (ZRN)	○*1	○*1	○*1
	Variable Speed Pulse Output (PLSV)	○	○	○
	Drive to Increment (DRVI)	○	○	○
	Drive to Absolute (DRVA)	○	○	○
	Interrupt Positioning (DVIT)	×	×	○
	Batch Data Positioning Mode ([D]TBL)	×	○	○*2
	Pulse output type	Pulse train + direction	Pulse train + direction	Pulse train + direction

*1: No DOG search function Decelerate when near point DOG turns ON, and stop when near point DOG turns OFF (Different from zero return operation with zero signal count)
*2: FX3UC-32MT-LT supported from version 2.20 or later.

Optional parts and spare parts

Servo motor connection cable

Model		Length	Description
	E-GMH-200CAB	2 m	[MR-H series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block.
	E-GMJ-200CAB	2 m	[MR-J series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block.
	E-GMJ2-200CAB1A	2 m	[MR-J2, MR-J2-Super series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
	E-GMC-200CAB	2 m	[MR-C series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block.
	E-GM-200CAB	2 m	[General purpose connection cable] Has connector on both sides. Can connect to general purpose drive unit via Mitsubishi terminal block.

Connector for self-manufactured I/O cable (an electric wire or a crimp tool is not enclosed.)

Model		Description
	FX2C-I/O-CON	[Flat Cable Connector] AWG28 (0.1 mm²): A set of 10 pcs Crimp connector: FRC2-A020-3OS 1.27-pitch 20 cores Crimp tool: Separately arrange the tool manufactured by DDK Ltd. 357J-4674D Main Unit 357J-4664N Attachment
	FX2C-I/O-CON-S	[Connector for bared wire] AWG22 (0.3 mm²): 5 sets Housing: HU-200S2-001 Crimp contact: HU-411S Crimp tool: A product manufactured by DDK Ltd. is separately required. 357J-5538
	FX2C-I/O-CON-SA	[Connector for bared wire] AWG20 (0.5mm²): 5 sets Housing: HU-200S2-001 Crimp contact: HU-411SA Crimp tool: A product manufactured by DDK Ltd. is separately required. 357J-13963

Extension connection cable

Model		Length	Description
	FX2N-GM-65EC	65 cm	[Connection extension cable between PLC and FX2N-10GM/FX2N-20GM] One cable cable can be used in a system. Standard connection cable (55mm) is included with FX2N-10GM/FX2N-20GM.
F2-RS-5CAB		5 m	[Resolver extension cable for FX2N-1RM] Resolver can be extended up to 100m extension by linking multiple cables.

Connection cable for peripheral devices

Model		Length	Description
	(1) E-20TP-CAB0	3 m	[E-20TP connection cable] FX2N-10GM/FX2N-20GM (MINI DIN 8-pin) ⇔ E-20TP (MINI DIN 8-pin) Cable length is different between (1) and (2). (1) E-20TP-CAB0 (3 m) is included with E-20TP-SET0.
	(2) FX-20P-CAB0	1.5 m

Spare parts

Model	Length	Description
FX2N-GM-5EC	55 mm	[Connection cable between PLC and FX2N-10GM/20GM] One cable is included with FX2N-10GM/20GM.

Address

Call us on

Mail us @

FX PLC Main Unit

Extension units

Function expansion board

Extension blocks

Extension block for connector type main unit (FX3GC, FX3UC)

Analog expansion board (A/D conversion, D/A conversion)

Mixed Analog Input/Output (A/D conversion, D/A conversion)

Analog Input (A/D conversion)

Analog Output (D/A conversion)

High speed counter block/adapter

High-speed output special adapter

Pulse output block

SSCNET

Positioning dedicated unit

Fx Communication

High-speed output special adapter

Pulse output block

SSCNET

Positioning dedicated unit

For FX2N-10GM/FX2N-20GM positioning teaching panel

Angle control unit

PLC built-in pulse output functions and positioning functions

Optional parts and spare parts

Servo motor connection cable

Connector for self-manufactured I/O cable (an electric wire or a crimp tool is not enclosed.)

Extension connection cable

Connection cable for peripheral devices

Spare parts