*: When used together with analog or communication adapters, function expansion board is required
Pulse output block
| Model |
Number of
controlled axis |
Maximum
frequency |
Applicable FX PLC |
|---|
FX
3S |
FX
3G |
FX
3U |
FX
3GC |
FX
3UC |
 |
FX3U-1PG |
Independent one axis |
200kHz |
× |
× |
*3
○
Max.
8 units |
× |
*1*3
○
Max.
6 units |
 |
FX2N-10PG |
Independent one axis |
1MHz(1 Hz to 1 MHz
differential line driver output) |
× |
× |
○
Max.
8 units |
× |
*1*2
○
Max.
8 units |
*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.
*3: FX3U, FX3UC supported from version 2.20 or later.
SSCNET
| Model |
Number of
controlled axis |
Maximum
frequency |
Applicable FX PLC |
|---|
FX
3S |
FX
3G |
FX
3U |
FX
3GC |
FX
3UC |
 |
FX3U-20SSC-H |
Ｔwo axes
(Independent/Simultaneous) |
- |
× |
× |
○
Max.
8 units |
× |
*1*2
○
Max.
8 units |
*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.
Positioning dedicated unit
| Model |
Number of
controlled axis |
Maximum
requency |
Applicable FX PLC |
|---|
FX
3S |
FX
3G |
FX
3U |
FX
3GC |
FX
3UC |
 |
FX2N-10GM |
Independent one axis |
200kHz |
× |
× |
○
Max.
8 units |
× |
*1*2
○
Max.
8 units |
 |
FX2N-20GM |
Two axes
(Independent/Simultaneous) |
200kHz |
*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units
For FX2N-10GM/FX2N-20GM positioning teaching panel
| Model |
Product |
E-20TP-SET0
(with E-20TP-CAB0) |
FX2N-10GM, FX2N-20GM |
E-20TP-E-SET0
(with E-20TP-CAB0) |
Angle control unit
| Model |
Number of
controlled axis |
Maximum
frequency |
Applicable FX PLC |
|---|
FX
3S |
FX
3G |
FX
3U |
FX
3GC |
FX
3UC |
 |
FX2N-1RM-SET*1 |
One axis |
720 divisions/rotation (0.5 degree)
or 360 divisions/rotation (1 degree) |
× |
× |
○
Max.
3 units |
× |
*2*3
○
Max.
3 units |
| FX2N-1RM-E-SET*1 |
*1: FX2N-1RM-SET is a Japanese domestic only product. For use overseas, please select FX2N-1RM-E-SET, which supports overseas standards.
*2: Extension cable cannot be used.
*3: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
PLC built-in pulse output functions and positioning functions
| Items |
FX3S |
FX3G，FX3GC |
FX3U，FX3UC |
| Number of axis |
Two axes |
[FX3G]
Two axes (14/24 points)
Three axes (40/60 points)
[FX3GC]
Two axes |
Three axes |
| Number of controlled axis |
Independent two axes |
[FX3G]
Independent two axes (14/24 points)
Independent three axes (40/60 points)
[FX3GC]
Independent two axes |
Independent three axes |
| Maximum frequency |
100 kHz |
100 kHz |
100 kHz |
| Programming languages |
Sequence programs |
Sequence programs |
Sequence programs |
| Compatible main unit |
Transistor
output type
main unit |
Transistor
output type
main unit |
Transistor
output type
main unit |
Pulse
output instruction |
Pulse Y Output
(PLSY) |
○ |
○ |
○ |
Acceleration/Deceleration Setup
Pulse Y Output
(PLSR) |
○ |
○ |
○ |
| Pulse output type |
Pulse train
(Direction is controlled
by PLC program) |
Pulse train
(Direction is controlled
by PLC program) |
Pulse train
(Direction is controlled
by PLC program) |
Positioning
instruction |
Absolute Current Value Read
([D]ABS) |
○ |
○ |
○ |
Dog Search
Zero Return
(DSZR) |
○ |
○ |
○ |
Zero Return
(ZRN) |
○*1 |
○*1 |
○*1 |
Variable Speed Pulse Output
(PLSV) |
○ |
○ |
○ |
Drive to Increment
(DRVI) |
○ |
○ |
○ |
Drive to Absolute
(DRVA) |
○ |
○ |
○ |
Interrupt Positioning
(DVIT) |
× |
× |
○ |
Batch Data Positioning Mode
([D]TBL) |
× |
○ |
○*2 |
| Pulse output type |
Pulse train + direction |
Pulse train + direction |
Pulse train + direction |
| |
|
|
|
|---|
*1: No DOG search function Decelerate when near point DOG turns ON, and stop when near point DOG turns OFF (Different from zero return operation with zero signal count)
*2: FX3UC-32MT-LT supported from version 2.20 or later.
Optional parts and spare parts
Servo motor connection cable
| Model |
Length |
Description |
 |
E-GMH-200CAB |
2 m |
[MR-H series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. |
 |
E-GMJ-200CAB |
2 m |
[MR-J series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. |
 |
E-GMJ2-200CAB1A |
2 m |
[MR-J2, MR-J2-Super series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. |
 |
E-GMC-200CAB |
2 m |
[MR-C series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. |
 |
E-GM-200CAB |
2 m |
[General purpose connection cable]
Has connector on both sides.
Can connect to general purpose drive unit via Mitsubishi terminal block. |
Connector for self-manufactured I/O cable (an electric wire or a crimp tool is not enclosed.)
| Model |
Description |
 |
FX2C-I/O-CON |
[Flat Cable Connector]
AWG28 (0.1 mm2): A set of 10 pcs
Crimp connector: FRC2-A020-3OS 1.27-pitch 20 cores
Crimp tool: Separately arrange the tool manufactured by DDK Ltd.
357J-4674D Main Unit
357J-4664N Attachment |
 |
FX2C-I/O-CON-S |
[Connector for bared wire]
AWG22 (0.3 mm2): 5 sets
Housing: HU-200S2-001
Crimp contact: HU-411S
Crimp tool: A product manufactured by DDK Ltd. is separately required.
357J-5538 |
| FX2C-I/O-CON-SA |
[Connector for bared wire]
AWG20 (0.5mm2): 5 sets
Housing: HU-200S2-001
Crimp contact: HU-411SA
Crimp tool: A product manufactured by DDK Ltd. is separately required.
357J-13963 |
Extension connection cable
| Model |
Length |
Description |
 |
FX2N-GM-65EC |
65 cm |
[Connection extension cable between PLC and FX2N-10GM/FX2N-20GM]
One cable cable can be used in a system.
Standard connection cable (55mm) is included with FX2N-10GM/FX2N-20GM. |
| F2-RS-5CAB |
5 m |
[Resolver extension cable for FX2N-1RM]
Resolver can be extended up to 100m extension by linking multiple cables. |
Connection cable for peripheral devices
| Model |
Length |
Description |
 |
(1) E-20TP-CAB0 |
3 m |
[E-20TP connection cable]
FX2N-10GM/FX2N-20GM (MINI DIN 8-pin) ⇔ E-20TP (MINI DIN 8-pin)
Cable length is different between (1) and (2).
(1) E-20TP-CAB0 (3 m) is included with E-20TP-SET0. |
| (2) FX-20P-CAB0 |
1.5 m |
Spare parts
| Model |
Length |
Description |
| FX2N-GM-5EC |
55 mm |
[Connection cable between PLC and FX2N-10GM/20GM]
One cable is included with FX2N-10GM/20GM. |
