• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-5030

2-slot SD Storage Module


Main Features

  • Storage Type: SD (Secure Digital Card)
  • USB Type: USB Rev 2.0 (Compliant)
  • USB Number: 2, SD Card Number: 2
  • Max Storage: 1GB x 2
  • Interface: PCI Bus
  • Format: FAT-16
  • Operating Temperature: 0 ~ 60° C (32 ~ 140° F)
  Datasheet (PDF)
Introduction

ADAM-5030 is a 2-slot secure digital card storage module that provides 2 USB ports and 2 SD slots. It is fully compliant with USB 2.0 and FAT16 and is also low power consuming, at only 0.5W. According the volume of SD Card, you can extend the memory of your controller up 2 GB. Unlike commercial modules, it is very rugged, and has a very long lifecycle.
Specifications
Part Number ADAM-5030-AE
Control System Supported Controller ADAM-5550KW
General Connectors N/A
Wiring Board -
Storage Channel 2
Size 2 GB (Max)
Type SD (Secure Digital Card)
USB Channel +10 ~ +30 VDC 2
Type V2.0 (compliant)

ADAM-5202

2-port AMONet Master Module


Main Features

  • Communication Slave: 2 Rings with Max. 128 (1 Ring with 64 slaves) Module Number
  • Communication: Max. 100 m (20 Mbps/32 slave modules) or 50 m (20 Mbps/64 slave modules) Distance
  • Serial Interface: Half duplex RS-485 with transformer isolation
  • Surge Protection: 10 kV
  • Transmission Speed: 2.5, 5, 10 or 20 Mbps with automatic data flow control
  • Remote motion and remote IO function
  • LED Indictors: Active, Error (Each Port)
  • Operating Temperature: 0 ~ 50° C (32 ~ 140° F)
  Datasheet (PDF)
Introduction

ADAM-5202 is a 2-ring AMONet module that provides 128 maximum slaves and supports 100-meter long distance communications. The transmission speed can support 2.5, 5, 10 or 20 Mbps with automatic data flow control. It accepts half duplex RS-485 serial interfaces with transformer isolation. This module can also function as a motion module for AMONet Master Control.
Specifications
Part Number ADAM-5202-AE
Control System Supported Controller ADAM-5550KW
General Connectors 2 x RJ45
Wiring Board AMAX-3752F, AMAX-3754F, 
AMAX-3756F
Storage Channel -
Size -
Type -
USB Channel -
Type -

PWR-242

DIN-rail Power Supply


Main Features

  • Input short protection
  • Output overload protection
  • Operation temperature: 0~50 ℃
  Datasheet 
Introduction

DIN-Rail Power Supply

ADAM-5240

4-axis Stepping/Pulse-type Servo Motor Control Module


Main Features

  • High-speed 4-axis stepping/pulse-type servo motion control
  • Hand wheel and jog function
  • 2/3-axis linear interpolation function
  • 2-axis circular interpolation function
  • Continuous interpolation function
  • Programmable T/S-curve acceleration/deceleration rate
  • Up to 4 MPPS output for each axis
  • Two pulse output types: CW/CCW or Pulse/Direction
  • Up to 1 MHz encoder input for each axis
  • Two encoder pulse input types: A/B phase or Up/Down
  • Position management and software limit switch function
  Datasheet (PDF)
Introduction

Advantech's Industrial Automation Group introduces the ADAM-5240, a 4-axis Stepping/Pulse-type Servo Motor Control Module for use with ADAM-5550 Series PACs (Programmable Automation Controllers). ADAM-5240 is is fully integrated to fulfill general purpose motion applications. Equipped with high speed 4-axis motion control module that simplifies stepping and pulse-type servo motor control, ADAM-5240 provides advanced performance.
Specifications
Part Number ADAM-5240-AE
Control System Supported Controller ADAM-5550KW
General Connectors 100-pin SCSI-II
Wiring Board ADAM-3952, ADAM-3952J2S
Storage Channel -
Size -
Type -
USB Channel -
Type -

PWR-243

Panel Mount Power Supply


Main Features

  • Input short protection
  • Output overload protection
  Datasheet (PDF)
Introduction

Panel Power Supply

More Articles ...

  1. PWR-244
  2. RS-485 I/O Modules: ADAM-4000
  3. Wireless I/O Modules: ADAM-2000
  4. Robust Remote I/O Modules
Page 86 of 156
  • Siemens
Siemens offers a wide range of Programmable Logic Controllers (PLC). S7-1200 PLC is suitable for small individual machine applications, whereas S7-300 PLC was previously targeted towards medium to high demand applications. However since it is nearing its end-of-lifecycle, S7-300/400 PLC series have been supplemented with the innovative S7-1500 PLC series. A new range of HMI panels are also available in all sizes for suitable operator control/monitoring. S7-1200 and S7-1500 are both part of Totally Integrated Automation (TIA) platform and programmable via Siemens TIA Portal software.
Simatic 300

          SIMATIC S7-300

 
Simatic 1200

         SIMATIC S7-1200

 
Simatic 1500

         SIMATIC S7-1500

 

s7 400

          SIMATIC S7-400

 
Simatic HMI

          SIMATIC HMI