• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

s7 1200 plus cm1243 5
 

The use of the SIMATIC S7-1200 as a master or slave on the proven PROFIBUS field bus facilitates standardized communication from the field level through to the control level. This meets one of the most important requirements in the performance range of compact automation.
For the connection of the S7-1200 to PROFIBUS there are two communication modules (CMs): The DP-Master CM 1243-5 enables as many as 16 field devices to be connected as slaves, e.g. ET 200 distributed I/O modules. Together with the CM 1242-5, the S7-1200 functions as a DP-Slave and can thus be connected to any DP-Master. Both modules are readily connected on the left of the CPU via the backplane bus.

 

Communication module

 

DP-Master CM 1243-5
cm1243 5 table

Order Information

Article No.

For connection of SIMATIC S7-1200 to PROFIBUS
as DP master module;
PG/OP communication

  

CM 1243-5 PROFIBUS DP Master

6GK7 243-5DX30-0XE0

CM 1242-5 PROFIBUS DP Slave
cm1242 5 table

Order Information

Article No.

For connection of SIMATIC S7-1200 to PROFIBUS
as DP slave module

  

CM 1242-5 PROFIBUS DP Slave

6GK7 242-5DX30-0XE0

Products

C&M rovides a range of automation products from a number of manufacturers.

Our product range includes both automation building blocks like programmable logic controllers PLC's, Human Machine Interface HMI, industrial communication adapters, and customized products, like Compressor Management System and Battery Life Cycle Tester.

 

AB

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology

customized

C&M Engineering has designed a reliable and robust compressor management system that is available as a customized product specifically configured according to your pressure demand.

MITSUBISHI

MITSUBISHI

Analog input modules provide an interface to the CPU for sensing variable real world levels of voltage and current signals. These signals are converted into digital values by the modules

Omron

Omron

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept.Lean Automation fits into stand-alone

Siemens

Siemens

Signal modules are the interface of SIMATIC S7-300 to the process. A host of different digital and analog modules provide exactly the inputs/outputs required for each task.

Thinget

Thinget

Thinget PLC is powered by Digital and Analogue Expansion modules, BD boards, motion controllers, PT100, Thermocouple Input

equipped with built-in PID controller, and high