• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-6520L

 5-port Industrial 10/100 Mpbs Unmanaged Ethernet Switch


Main Features

  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Supports +10~30 VDC for power input
  • Provides surge protection 3,000 VDC for power line
  • Provides flexible mounting: DIN-rail, Wall, Stack
 
Introduction

ADAM-6520L is a 5-port Industrial 10/100 Mbps Unmanaged Ethernet Switch, which substitutes ADAM-6510, which is being phased-out. With ADAM-6520L, users can upgrade their 10 Mbps hub to a 10/100 Mbps switch, for a small cost.
Specifications
Part Number ADAM- 6520L-AE
General Ethernet Connectors 5 x RJ-45
Mounting DIN 35 rail, 
Wall, Stack
I/O Transmission Distance Ethernet up to 100 m
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature 0 ~ 60°C (32 ~ 140°F) 
Stack: 0~ 50°C (32 ~ 122°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

ADAM-6521

Industrial Ethernet Switch with 4 x 10/100Base-TX Ports & 1 Multi-mode SC Type Fiber Optic Port


Main Features

  • Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector
  • Provides 1 x 100 Mbps multi/single-mode fiber port with SC/ST connector
  • Supports full/half duplex flow control
  • Supports Integrated Loop-up engine
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Supports +10 ~ 30 VDC voltage power input
  • Provides surge (EFT) protection 3,000 VDC for power line
  • Supports 4,000 VDC Ethernet ESD protection
  • Provides flexible mounting: DIN-rail, Wall, Stack
  • Supports operating temperatures from -10 ~ 65° C
 
Introduction

The ADAM-6521 is an industrial-grade Ethernet hub for infrastructure networking solution in industrial Automation environment. It allows users to cost-effectively expand their industrial network with ease. The ADAM-6521 consists of one fiber optic and four RJ-45 ports. With fiber optic, you can prevent noise interference from the system and transmission distance up to 2 km. The design is focused on industrial-grade reliability and stability. Thus, the ADAM-6521 is especially suited for industrial environments with Ethernet networking needs, e.g. semi-conductor factories, inventory control environments, assembly lines, production and more.
Specifications
Part Number ADAM-6521-BE
General Ethernet Connectors 4 x RJ-45 + 1 x SC 
type fiber connector
Mounting DIN 35 rail, 
Wall, Stack
I/O Transmission Distance Ethernet up to 100 m, Fiber up to 2 km
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -10 ~ 70°C (14 ~ 158°F) 
I21 Stack: -10~ 60°C 
(-40 ~ 140°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

ADAM-6521/ST

Industrial Ethernet Switch with 4 x 10/100Base-TX Ports & 1 Multi-mode ST Type Fiber Optic Port


Main Features

  • Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector
  • Provides 1 x 100 Mbps multi/single-mode fiber port with ST connector
  • Supports full/half duplex flow control
  • Supports Integrated Loop-up engine
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Supports +10 ~ 30 VDC voltage power input
  • Provides surge protection (EFT) 3,000 VDC for power line
  • Supports 4,000 VDC Ethernet ESD protection
  • Provides flexible mounting: DIN-rail, panel, piggyback
  • Supports operating temperatures from -10 ~ 65° C
 
Introduction

ADAM-6521/ST is an industrial-grade Ethernet switch with a fiber optic port that makes it possible to expand industrial networks fast and cost-effectively. ADAM-6521/ST has 1 fiber port and 4-RJ-45 ports. With fiber optics, you can prevent noise interfering with your system and implement transmission distances up to 15 km. ADAM-6521/ST supports a wide voltage range of +10 ~ 30 VDC over the terminal block, and 3,000 VDC surge protection (EFT) to protect it from being damaged by over-voltage. A wide operating temperature range from -10 to 65° C (14 ~ 149° F), makes it functional in harsh operating environments. Six inclusive LED indicators make troubleshooting easier. Each port has a pair of LEDs that indicate link status and transmission speed. This function conveniently informs users of any collisions, the link status, power failure and data receipts for immediate on-site diagnostics.
Specifications
Part Number ADAM-6521/ST-AE
General Ethernet Connectors 1 x ST type fiber connector
Mounting DIN 35 rail, 
Wall, Stack
I/O Transmission Distance Ethernet up to 100 m, Fiber up to 2 km
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -10 ~ 70°C (14 ~ 158°F) 
I21 Stack: -10~ 60°C 
(-40 ~ 140°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

ADAM-6521S

Industrial Switch with 4 10/100 Mbps Ethernet Port & 1 Single-mode Fiber Port


Main Features

  • Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector
  • Provides 1 x 100 Mbps multi/single-mode fiber port with SC connector
  • Supports full/half duplex flow control
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Embedded with a switch controller, supports auto-negotiation
  • Embedded with the memory buffer, supports store-and-forward transmission
  • Support +10 ~ 30 VDC voltage
  • Provides surge protection 3000 VDC for power line
  • Provides flexible mountings: DIN-rail, panel, piggyback
  • Supports operating temperature: -10 ~ 65°C
 
Introduction

ADAM-652S1 is an industrial-grade Ethernet switch and single-mode fiber converter. It is designed to help extend an Ethernet network up to 15 km through areas with electrical noise interference. ADAM-6521 has one fiber optic and four RJ-45 ports. With single-mode fiber transmission, you can prevent noise interference and achieve transmission distances up to 15 km. Thus, ADAM-6521S is especially suitable for industrial environments with long-distance Ethernet networking needs, e.g. warehouses, transportation, environmental monitoring, and many more.
Specifications
Part Number ADAM-6521S-AE
General Ethernet Connectors 4 x RJ-45 + 1 x SC 
type fiber connector
Mounting DIN 35 rail, 
Wall, Stack
I/O Transmission Distance Ethernet up to 100 m, Fiber up to 15 km
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -10 ~ 70°C (14 ~ 158°F) 
I21 Stack: -10~ 60°C 
(-40 ~ 140°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

ADAM-6541

Ethernet to Multi-mode Fiber Optic Converter


Main Features

  • Supports 1-port 100 Mbps multimode fi ber optics
  • Supports 10 ~30 VDC power input
  • Easily mounted on a DIN-rail, panel or piggyback
  • Supports full/half-duplex fl ow control.
  • Supports MDI/MDIX auto crossover.
  • Embedded with a switch controller, supports auto-negotiation.
  • Embedded with memory buffer, supports store and forward transmission.
 
Introduction

The ADAM-6541 is an industrial grade converter which is designed to convert Ethernet network (10/100Base-TX) to fiber network (100Base-FX). It transparently converts Ethernet signals into optic signals. The advantages of fiber optics are wide bandwidth, anti-EMI and suitable for long-distance transmission. Therefore, the ADAM-6541 is an ideal solution for "fiber to building" application at central offices or local sites. 
Specifications
Part Number ADAM- 6541-AE
General Ethernet Connectors 1 x RJ-45 
1 x SC type fiber connector
Mounting IP30, 
ABS+PC with solid 
mounting kits
I/O Transmission Distance Ethernet: Up to 100 m 
Fiber:Multi-mode: Up to 2 km 
Single-mode: Up to 20km
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature 0 ~ 60°C (32 ~ 140°F) 
Stack: 0~ 50°C (32 ~ 122°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

More Articles ...

  1. ADAM-6541/ST
  2. EKI-6528TI
  3. EKI-6528TPI
  4. EKI-6558TI
Page 65 of 156

Products

C&M rovides a range of automation products from a number of manufacturers.

Our product range includes both automation building blocks like programmable logic controllers PLC's, Human Machine Interface HMI, industrial communication adapters, and customized products, like Compressor Management System and Battery Life Cycle Tester.

 

AB

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology

customized

C&M Engineering has designed a reliable and robust compressor management system that is available as a customized product specifically configured according to your pressure demand.

MITSUBISHI

MITSUBISHI

Analog input modules provide an interface to the CPU for sensing variable real world levels of voltage and current signals. These signals are converted into digital values by the modules

Omron

Omron

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept.Lean Automation fits into stand-alone

Siemens

Siemens

Signal modules are the interface of SIMATIC S7-300 to the process. A host of different digital and analog modules provide exactly the inputs/outputs required for each task.

Thinget

Thinget

Thinget PLC is powered by Digital and Analogue Expansion modules, BD boards, motion controllers, PT100, Thermocouple Input

equipped with built-in PID controller, and high