Products

Programmable Device Servers

Advantech's EKI-1100 Industrial RISC-based Communication Controller comes with versatile peripherals interfaces, communication capabilities, and storage expandability. The EKI-1100 uses the ultra-low power ARM7 processor or Intel Xcale processor and it is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in Flash ROM and SDRAM provide user enough storage to run their specific applications.

Product
Model Number		Description
EKI-1121L		1-port Programmable Device Server

EKI-1122L		2-port Programmable Device Server

Advantech Serial Device Servers

Advantech's Serial Device Servers are easy to install and configure, support wired and wireless networking and provide various operation modes to satisfy rigorous industrial automation needs. EKI-1000 Serial Device Servers enable RS-232/422/485 serial devices to be dual-connected to Ethernet switches for unrivaled reliability. Product line covers wired and wireless (WLAN, GPRS, 3G) serial device server, modbus gateway, and programmable device server.

Product Catagories
	Serial Device Servers The serial device servers enable RS-232/422/485 serial devices to be connected to a host computer over an Ethernet network quickly and cost-effectively. No extra programming effort is required at the host computer, so software development costs can be saved. Serial device servers are especially suitable for remotely controlling and monitoring your serial devices via the Ethernet.
	Modbus Gateway The Modbus Serial Device Server as an interface between Modbus serial devices and computer hosts running Modbus/TCP on Ethernet networks. Fully compliant with Modbus/TCP, the Modbus Serial Device Server offers a convenient solution to connect existing devices or controllers running Modbus serial protocol (Modbus/ASCII or Modbus/RTU) to an Ethernet network.
	Programmable Device Servers Advantech's EKI-1100 Industrial RISC-based Communication Controller comes with versatile peripherals interfaces, communication capabilities, and storage expandability. The EKI-1100 uses the ultra-low power ARM7 processor or Intel Xcale processor and it is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in Flash ROM and SDRAM provide user enough storage to run their specific applications.

Product Catagories

Serial Device Servers

The serial device servers enable RS-232/422/485 serial devices to be connected to a host computer over an Ethernet network quickly and cost-effectively. No extra programming effort is required at the host computer, so software development costs can be saved. Serial device servers are especially suitable for remotely controlling and monitoring your serial devices via the Ethernet.

Modbus Gateway

The Modbus Serial Device Server as an interface between Modbus serial devices and computer hosts running Modbus/TCP on Ethernet networks. Fully compliant with Modbus/TCP, the Modbus Serial Device Server offers a convenient solution to connect existing devices or controllers running Modbus serial protocol (Modbus/ASCII or Modbus/RTU) to an Ethernet network.

Programmable Device Servers

PCI-1601A

2-port RS-422/485 PCI Comm Card
	Main Features PCI bus specification 2.1 compliant Speeds up to 921.6 kbps 2-port RS-422/485 interface I/O address automatically assigned by PCI Plug & Play OS support: Windows® 98/ME/2000/XP Interrupt status register for increased performance Space reserved for termination resistors Automatic RS-485 data flow control Powerful and easy-to use utility (ICOM Tools) Optional EFT Surge protection Optional isolation protection for RS-422/485

Introduction
PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFT surge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility software and more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable for multitasking environments. PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability, both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also provides a convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards.
Specifications
Part Number		PCI-1601A-AE
Communication <br>Interfaces	CAN	-
	Current Loop	-
	RS-232	-
	RS-422	V
	RS-485	V
Display	Ports	2
Network	Cable Connector Type	N/A
Protection	Isolation	-
Protection	Surge	-

EKI-1121L

1-port Programmable Device Server
		Main Features ARM7 32-bit 80MHz processor 8MB Flash ROM on board 16MB SDRAM 2 x 10/100 Mbps Ethernet ports for LAN redundancy 1 or 2 software selectable RS-232/422/485 serial ports 50 bps to 921.6 kbps baud rate Built-in real-time clock (RTC) Class I, Division 2 certification Pre-installed Linux Kernel 2.4 platform

Introduction
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.
Specifications
Part Number		EKI-1121L-AE
Ethernet Interface	Connector	RJ-45
	LAN	2 x auto-sensing 10/100 Mbps ports
Serial Interface	Connector	D-sub 9 male
	Serial Standards	Software selectable RS-232/422/485 ports
Software (uClinux)	Kernel Version	2.4.31
	Protocol Stack	TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
System	CPU	ARM7 32-bit RISC CPU, 80 MHz
	Flash	8 MB
	OS (pre-installed)	uClinux
	SDRAM	16 MB

PCI-1601B

2-port RS-422/485 PCI Communication Card w/EFT
	Main Features PCI bus specification 2.1 compliant Speeds up to 921.6 kbps 2-port RS-422/485 interface I/O address automatically assigned by PCI Plug & Play OS support: Windows® 98/ME/2000/XP Optional EFT Surge protection Interrupt status register for increased performance Space reserved for termination resistors Automatic RS-485 data flow control Powerful and easy-to use utility (ICOM Tools) Optional isolation protection for RS-422/485

Introduction
PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFTsurge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility softwareand more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable formultitasking environments. PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability,both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also providesa convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards.
Specifications
Part Number		PCI-1601B-AE
Communication <br>Interfaces	CAN	-
	Current Loop	-
	RS-232	-
	RS-422	V
	RS-485	V
Display	Ports	2
Network	Cable Connector Type	N/A
Protection	Isolation	-
Protection	Surge	2500 VDC