• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

Analog output modules SM 532

Analog output modules convert a 16-bit digital value into a current or a voltage and output this to the process. They are suitable, for example, for controlling proportional valves or small servo drives.

Modules with a width a width of 35 mm can be equipped with a front connector using screw terminal or push-in technology, the connector has to be ordered separately.
The narrow 25mm modules use a front connector with push-in technology which is included in the scope of delivery. The modules have the same mechanical structure as the 35 mm modules. They also offer the same operability and the same accessories. Moreover, the pin assignment in the wiring is unchanged. This means that circuit and wiring diagrams can be universally used. For all analog output modules the components for shielding like power supply element, shield bracket, and shield terminal are included in the scope of delivery.

The narrow 25 mm modules can be used side by side with 35 mm modules in one station.

Expanded functions for analog outputs

Oversampling (for SM 532 AQ 8XU/I HS)

The use of the oversampling function requires an isochronous configuration.
For analog output modules, the preset transmit clock is divided into up to 16 time-equidistant subcycles. A data packet is transferred by the controller to the module and written to the process divided into n equidistant subcycles. The read or output values are transferred in the user data of the analog module. This increases the address space of the module.
A major advantage of Oversampling is that no faster CPU-Cycle is required for recording the high temporal resolution measurements.

Isochronous mode (for SM 532 AQ 4XU/I HF)

With the "Isochronous mode" system property, measured values and process data can be acquired with a fixed system clock. The signal processing until switching on the output terminal occurs in the same system clock. Isochronous mode thus contributes to high quality of the controller and therefore to greater manufacturing precision. Possible fluctuations of the process response times are significantly reduced. Time-assured processing, i.e. the high deterministic response, can be used for a higher machine cycle.

Analog output modules with 35 mm width

SIMATIC ET 200 MP Analogausgabemodul 35mm Breite
 

SM 532 AQ 4xU/I ST

Standard analog output module with 4 channels

  • output: current, voltage,

  • 16 bit resolution

  • accuracy +/-0.3%

  • one potential group

  • parameterizable diagnostics

  • parameterizable substitute values for the outputs

  • calibration during execution time

  • Article No.: 6ES7532-5HD00-0AB0


SM 532 AQ 4xU/I HF

High Feature analog output module with 4 channels

  • output: current, voltage

  • 16 bit resolution

  • accuracy +/-0.1%...+/-0.2%

  • four potential groups

  • common mode voltage 30 VAC / 60 VDC

  • parameterizable diagnostics

  • parameterizable substitute values for the outputs

  • isochronous mode

  • Article No.: 6ES7532-5ND00-0AB0


SM 532 AQ 8xU/I HS

High Speed analog output module with 8 channels

  • output: current, voltage

  • 16 bit resolution

  • accuracy +/-0.3%

  • one potential group

  • parameterizable diagnostics

  • parameterizable substitute values for the outputs

  • high speed with 8 channels in 125 µs;

  • oversampling

  • calibration during execution time

  • Article No.: 6ES7532-5HF00-0AB0

Analog output module with 25 mm width

SIMATIC ET 200MP Analogausgabemodul 25mm Breite
 

 

SM 532 AQ 2xU/I ST

Standard analog output module with 2 channels

  • output: current, voltage,

  • 16 bit resolution

  • accuracy +/-0.3%

  • one potential group

  • parameterizable diagnostics

  • parameterizable substitute values for the outputs

  • calibration during execution time

  • Article No.: 6ES7532-5NB00-0AB0

 
  • Allen Bradley

Programmable Controllers

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology embodied in the scalable, multi-disciplined and information-enabled programmable automation controller (PAC). Allen Bradley safety-certified controllers support your SIL 2 and SIL 3 application needs. Allen Bradley offer multiple controller types and sizes to fit your specific needs.

largecontrollerfamily front1 smprod
Large Control Systems

Allen Bradley Large Control Systems fit your most demanding application needs. They offer modular architectures and a range of I/O and network options. These powerful control solutions deliver world-class capabilities for all disciplines, from process to safety to motion. Designed for distributed or supervisory control applications, Allen Bradley large programmable automation controllers (PACs) and programmable logic controllers (PLC) provide exceptional reliability and performance.

smallcontrollerfamily front1 smprod

Small Control Systems 

The perfect solution for your mid-range applications, Allen Bradley small controllers offer the features and flexibility you need without the overhead of larger systems. Choose from standard and safety-certified controllers in chassis-based, packaged and modular designs. Typical applications include complex machine control, batch processing and building automation.

micronanocontrollerfamily front1 smprod

Micro & Nano Control Systems

Allen Bradley micro nano PLCs provide economical solutions to basic control needs for your simple machines ranging from relay replacement to simple control timing and logic. Compact packaging, integrated I/O and communication, and ease of use make these controllers an ideal choice for applications such as conveyor automation, security systems, and building and parking lot lighting.