Allen Bradley

Address

C-188, Sector 31-D, P&T Society,

Korangi Industrial Area,

Karachi-74900,

Pakistan
Call us on

+92-21-35070751

+92-300-5776703
Mail us @

info@pakplc.com

PCL-745B

PCL-745B

2-port RS-422/485 Cards with 3000 VDC isolation protection
		Main Features Two independent RS-422/485 serial ports Provides 3000 VDC isolation 16C550 UARTs with on-chip 16-byte FIFO Transmission speeds up to 921.6 kbps I/O address and interrupt selectable Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 Supports 2 wire or 4 wire operation Supports Tx, Rx, RTS, and CTS signals Automatic RS-485 data flow control or RTS control Termination resistors jumper enable/disable Space reserved for optional surge protection on data lines Supports Windows® 98/2000/XP, Linux®

Introduction
The PCL-745 series card provides two RS-422/485 serial ports.Each port utilizes a 16C550 UART with an on-chip 16-byte FIFO buffer for reliable, high-speed serial I/O. The UART buffer divides data into 16-byte packets before sending them onto the bus. This drastically reduces the CPU load and avoids data loss due to failure to respond to the interrupt request in time. The UART is especially useful for high speed serial I/O under Windows. The PCL-745B card differs from the PCL-743B card in that the former uses on-board optical isolators to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments.
Specifications
Part Number		PCL-745B-BE
Communication<br>Interfaces	CAN	-
	Current Loop	-
	RS-232	-
	RS-422	V
	RS-485	V
Display	Ports	4
Network	Cable Connector Type	N/A
Protection	Isolation	3000 VDC
Protection	Surge	-

PCL-745S

PCL-745S

2-port RS-422/485 Cards with 3000 VDC Isolation and Surge Protection
		Main Features Two independent RS-422/485 serial ports Provides 3000 VDC isolation Provides 2500 VDC surge protection 16C550 UARTs with on-chip 16-byte FIFO Transmission speeds up to 921.6 kbps I/O address and interrupt selectable Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 Supports 2 wire or 4 wire operation Supports Tx, Rx, RTS, and CTS signals Automatic RS-485 data flow control or RTS control Termination resistors jumper enable/disable Supports standard DOS COM1, COM2, COM3, and COM4 Supports Windows® 98/2000/XP, Linux® Powerful and easy-to-use utility (ICOM Tools)

Introduction
The PCL-745 series card provides two RS-422/485 serial ports.Each port utilizes a 16C550 UART with an on-chip 16-byte FIFO buffer for reliable, high-speed serial I/O. The UART buffer divides data into 16-byte packets before sending them onto the bus. This drastically reduces the CPU load and avoids data loss due to failure to respond to the interrupt request in time. The UART is especially useful for high speed serial I/O under Windows. The PCL-745S card differs from the PCL-743S card in that the former uses on-board optical isolators to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments. To further increase reliability, the PCL-745S offers surge protection technology, protecting your system from abrupt high voltage surges (up to 2500 V) such as those caused by lightning.
Specifications
Part Number		PCL-745S-BE
Communication<br>Interfaces	CAN	-
	Current Loop	-
	RS-232	-
	RS-422	V
	RS-485	V
Display	Ports	2
Network	Cable Connector Type	N/A
Protection	Isolation	3000 VDC
Protection	Surge	2500 VDC

PCL-846

PCL-846

4-port High-speed RS-422/485 Communication Card
		Main Features Four or eight RS-232 or RS-422/485 serial ports Transmission speeds up to 921.6 kbps Independent/shared IRQ settings between each of the 4 serial ports Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 Supports COM1, COM2, COM3, and COM4 Provides 1000 VDC isolation (PCL-846 only) Provides 2000 VDC EFT Surge Protection (PCL-846B only) Provides 3000 VDC EFT Surge Protection(PCL-849B, PCL-849+, PCL-858B) Space reserved for termination resistors Supports 2 wire or 4 wire operation Automatic RS-485 data flow control or RTS control Supports Windows® 98/ME/2000/XP, Linux Powerful and easy-to-use utility (ICOM Tools)

Introduction
PCL-800 series communication card provides reliable, high-speed serial communication. The unique shared interrupt can be set to most common (extended) AT interrupts. This simplifies programming, speeds up interrupt processing and frees up interrupts for other devices. PCL-800 series cards also provide EFT surge or isolation protection to prevent your PC and equipment against damage from ground loops, increasing system reliability in harsh environments or abrupt high voltage surges such as those caused by lightning during thunderstorms.
Specifications
Part Number		PCL-846A-AE	PCL-846B-AE
Communication<br>Interfaces	CAN	-	-
	Current Loop	-	-
	RS-232	-	-
	RS-422	V	V
	RS-485	V	V
Display	Ports	4	4
Network	Cable Connector Type	DB9 Male	DB9 Male
Protection	Isolation	1000 VDC	1000 VDC
Protection	Surge	-	2500 VDC

PCL-746+

PCL-746+

4-port RS-232/422/485 Communication Card
		Main Features Two independent RS-422/485 serial ports Provides 3000 VDC isolation Provides 2500 VDC surge protection 16C550 UARTs with on-chip 16-byte FIFO Transmission speeds up to 921.6 kbps I/O address and interrupt selectable Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 Supports 2 wire or 4 wire operation Supports Tx, Rx, RTS, and CTS signals Automatic RS-485 data flow control or RTS control Termination resistors jumper enable/disable Supports standard DOS COM1, COM2, COM3, and COM4 Supports Windows® 98/2000/XP, Linux® Powerful and easy-to-use utility (ICOM Tools)

Introduction
The PCL-745 series card provides two RS-422/485 serial ports.Each port utilizes a 16C550 UART with an on-chip 16-byte FIFO buffer for reliable, high-speed serial I/O. The UART buffer divides data into 16-byte packets before sending them onto the bus. This drastically reduces the CPU load and avoids data loss due to failure to respond to the interrupt request in time. The UART is especially useful for high speed serial I/O under Windows. The PCL-745S card differs from the PCL-743S card in that the former uses on-board optical isolators to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments. To further increase reliability, the PCL-745S offers surge protection technology, protecting your system from abrupt high voltage surges (up to 2500 V) such as those caused by lightning.
Specifications
Part Number		PCL-745S-BE	PCL-746+-BE
Communication<br>Interfaces	CAN	-	-
	Current Loop	-	-
	RS-232	V	V
	RS-422	V	V
	RS-485	V	V
Display	Ports	4	4
Network	Cable Connector Type	DB9 Male	DB25 Male
Protection	Isolation	-	-
Protection	Surge	-	-

PCL-849

PCL-849

4-port RS-232 Communication Card
		Main Features Four or eight RS-232 or RS-422/485 serial ports Transmission speeds up to 921.6 kbps Independent/shared IRQ settings between each of the 4 serial ports Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 Supports COM1, COM2, COM3, and COM4 Provides 1000 VDC isolation (PCL-846 only) Provides 2000 VDC EFT Surge Protection (PCL-846B only) Provides 3000 VDC EFT Surge Protection(PCL-849B, PCL-849+, PCL-858B) Space reserved for termination resistors Supports 2 wire or 4 wire operation Automatic RS-485 data flow control or RTS control Supports Windows® 98/ME/2000/XP, Linux Powerful and easy-to-use utility (ICOM Tools)

Introduction
PCL-800 series communication card provides reliable, high-speed serial communication. The unique shared interrupt can be set to most common (extended) AT interrupts. This simplifies programming, speeds up interrupt processing and frees up interrupts for other devices. PCL-800 series cards also provide EFT surge or isolation protection to prevent your PC and equipment against damage from ground loops, increasing system reliability in harsh environments or abrupt high voltage surges such as those caused by lightning during thunderstorms.
Specifications
Part Number		PCL-849A/9-BE	PCL-849B/9-BE
Communication<br>Interfaces	CAN	-	-
	Current Loop	-	-
	RS-232	V	V
	RS-422	-	-
	RS-485	-	-
Display	Ports	4	4
Network	Cable Connector Type	-	DB25 Male
Protection	Isolation	-	-
Protection	Surge	-	3000 VDC

More Articles ...

Page 101 of 156

Allen Bradley

Programmable Controllers

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology embodied in the scalable, multi-disciplined and information-enabled programmable automation controller (PAC). Allen Bradley safety-certified controllers support your SIL 2 and SIL 3 application needs. Allen Bradley offer multiple controller types and sizes to fit your specific needs.

largecontrollerfamily front1 smprod

Large Control Systems

Allen Bradley Large Control Systems fit your most demanding application needs. They offer modular architectures and a range of I/O and network options. These powerful control solutions deliver world-class capabilities for all disciplines, from process to safety to motion. Designed for distributed or supervisory control applications, Allen Bradley large programmable automation controllers (PACs) and programmable logic controllers (PLC) provide exceptional reliability and performance.

smallcontrollerfamily front1 smprod

Small Control Systems

The perfect solution for your mid-range applications, Allen Bradley small controllers offer the features and flexibility you need without the overhead of larger systems. Choose from standard and safety-certified controllers in chassis-based, packaged and modular designs. Typical applications include complex machine control, batch processing and building automation.

micronanocontrollerfamily front1 smprod

Micro & Nano Control Systems

Allen Bradley micro nano PLCs provide economical solutions to basic control needs for your simple machines ranging from relay replacement to simple control timing and logic. Compact packaging, integrated I/O and communication, and ease of use make these controllers an ideal choice for applications such as conveyor automation, security systems, and building and parking lot lighting.

MicroLogix Control Systems