Customized Solutions

Address

C-188, Sector 31-D, P&T Society,

Korangi Industrial Area,

Karachi-74900,

Pakistan
Call us on

+92-21-35070751

+92-300-5776703
Mail us @

info@pakplc.com

ADAM-4561

ADAM-4561

1-port Isolated USB to RS-232/422/485 Converter
		Main Features Full compliance with USB V1.1 specifications RS-232/422/485 port supported Transmission speed up to 115.2 kbps Isolation protection 3000 VDC provided Automatic RS-485 data flow control No external power supply necessary; the hub derives its power from the USB port Plug & Play installation No additional IRQs or I/O ports required Hot swap function supported

Introduction
ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. Thismakes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.
Specifications
Part Number		ADAM-4561-BE
General	Serial	Screw Tterminal
	USB	Type B
Display	Interface	USB 1.1
Protection	Isolation	3000 VDC
	Surge	3000 VDC
Serial	Ports	1
	Type	RS-232/422/485
Software	Baud Rate	50 ~ 115.2 Kbps
	Driver	Windows 2000/2003/XP/Vista/7

ADAM-4522

ADAM-4522

RS-232 to RS-422/485 Converter
		Main Features Automatic RS-485 data flow control Surge protection RS-485 data line Transmission speed up to 115.2 Kbps Networking up to 1200 meters (4000 feet) Reserved space for termination resistors Power and data flow indicator for troubleshooting Power requirement: +10 to +30 VDC Mounts easily on a DIN-rail, panel or piggyback

Introduction
Most industrial computer systems come with standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals. The ADAM-4520/4522 converter lets you take advantage of RS-422 and RS-485 on systems originally equipped with RS-232. It transparently converts RS-232 signals into isolated RS-422 or RS-485 signals. You do not need to change your PC's hardware or your software. The ADAM-4522 lets you easily build an industrial grade, long distance communication system with standard PC hardware. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of connected nodes by 32.
Specifications
Part Number		ADAM-4522-AE
General	Built-in I/O	-
	Comm. Distance	Serial: 1.2 km
	Comm. Protocol	-
	Comm. Speed	Serial: From 1,200 to 115.2 k
	Data Flow Control	-
	Interface Connectors	RS-232: termale DB9 RS-422/485: plug-in screw terminal
	Isolation Voltage	-
	Network	RS-232 to RS-422/485
	Watchdog Timer	-

USB-4604B

USB-4604B

4-port Serial to USB Converter with ESD Surge Protection
		Main Features Full compliance with USB V1.1 and V2.0 specifications. RS-232 port supported Transmission speed up to 921.6 kbps Bus-powered; no need for external power supply Plug & Play installation No additional IRQs or I/O ports required Hot swap function support

Introduction
USB-4604 series allows PC users to connect a serial device to a system that use a USB interface. To attach the USB-4604B/4604BM to a PC, you don't need to open the chassis or power down your PC. Instantly get extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the USB-4604B/4604BM especially suitable for modems, printers, POS systems and industrial control devices. Supporting USB2.0 high speed, USB-4604B/4604BM features several powerful functions such as high-speed 921.6 kbps transmission, support for various operating systems, independent RS-232/422/485 ports and more. By simply plugging in a USB hub, USB-4604B and USB-4604BM eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.
Specifications
Part Number		USB-4604B-AE
General	Serial	DB9
	USB	Type B
Display	Interface	USB 1.1/2.0
Protection	Isolation	-
	Surge	2500 VDC
Serial	Ports	4
	Type	RS-232
Software	Baud Rate	50 ~ 921.6 Kbps
	Driver	Windows 2000/XP/2003, CE5.0

ADAM-4562

ADAM-4562

1-port Isolated USB to RS-232 Converter
		Main Features Full compliance with USB V1.1 specifications Transmission speed up to 115.2 kbps Isolation protection 3000 VDC provided Automatic RS-485 data flow control No external power supply necessary; the hub derives its power from the USB port Plug & Play installation No additional IRQs or I/O ports required Hot swap function supported

Introduction
ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. Thismakes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices. Compliant with USB V1.1, ADAM-4561/4562 features several powerful functions such as high-speed 115.2 kbps transmission, support for various operating systems, independentRS-232/422/485 ports and more. By simply plugging in a USB hub, ADAM-4561/4562 eliminates the configuration issues associated with high-priced, older card solutions. Youonly have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.
Specifications
Part Number		ADAM-4562-AE
General	Serial	DB9
	USB	Type B
Display	Interface	USB 1.1
Protection	Isolation	2500 VDC
	Surge	-
Serial	Ports	1
	Type	RS-232
Software	Baud Rate	75 ~ 115.2 Kbps
	Driver	Windows 98/2000/XP

USB-4604BM

USB-4604BM

4-port Serial to USB Converter with ESD Surge Protection
		Main Features Full compliance with USB V1.1 and V2.0 specifications. RS-232/422/485 port supported Transmission speed up to 921.6 kbps Automatic RS-485 data flow control Bus-powered; no need for external power supply Plug & Play installation No additional IRQs or I/O ports required Hot swap function supported

Introduction
USB-4604 series allows PC users to connect a serial device to a system that use a USB interface. To attach the USB-4604B/4604BM to a PC, you don't need to open the chassis or power down your PC. Instantly get extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the USB-4604B/4604BM especially suitable for modems, printers, POS systems and industrial control devices. Supporting USB2.0 high speed, USB-4604B/4604BM features several powerful functions such as high-speed 921.6 kbps transmission, support for various operating systems, independent RS-232/422/485 ports and more. By simply plugging in a USB hub, USB-4604B and USB-4604BM eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.
Specifications
Part Number		USB-4604BM-AE
General	Serial	DB9
	USB	Type B
Display	Interface	USB 1.1/2.0
Protection	Isolation	-
	Surge	2500 VDC
Serial	Ports	4
	Type	RS-232/422/485
Software	Baud Rate	50 ~ 921.6 Kbps
	Driver	Windows 2000/XP/2003, CE5.0

More Articles ...

Page 104 of 156

Customized Solutions

Compressor Management System

CMS-6 is a specialized supervisory control product with advanced features and functions designed to provide energy efficient optimized narrow pressure and priority management control of up to 6 air / gas compressors operating in a common compressed air / gas system

C&M Engineering has designed a reliable and robust compressor management system that is available as a customized product specifically configured according to your pressure demand.