• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-6541/ST

10/100Base-TX Ethernet to 100Base-FX Multi-mode ST Type Fiber Optic Converter


Main Features

  • Supports full/half duplex flow control
  • Supports Integrated Loop-up engine
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Supports +10 ~ 30 VDC voltage power input
  • Provides surge protection (EFT) 3,000 VDC for power line
  • Provides flexible mounting: DIN-rail, panel, piggyback
  • Supports operating temperatures from -10 ~ 65° C
  • Embedded a switch controller-supports auto-negotiation
  • Embedded a memory buffer-supports store and forward transmission
 
Introduction

ADAM-6541/ST is an industrial-grade converter designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541/ST are ideal solution for “fiber to building” applications at central offices or local sites. ADAM-6541/ST supports MDI/MDIX auto detection, so you don't need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps) automatically. Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data cane be transmitted properly. ADAM-6541/ST is extremely compact and can be mounted in three different ways: DIN-rail, panel and piggyback. ADAM-6541 and ADAM-6542 can operate from -10 ~ 65° C and accept a wide voltage range from +10 ~ 30 VDC. Besides, it also provides 3,000VDC surge protection (EFT) against over-voltage so it is suitable for harsh operating environments.
Specifications
Part Number ADAM-6541/ST-AE
General Ethernet Connectors 1 x ST type fiber connector
Mounting IP30, 
ABS+PC with solid 
mounting kits
I/O Transmission Distance Ethernet: Up to 100 m 
Fiber:Multi-mode: Up to 2 km 
Single-mode: Up to 20km
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature 0 ~ 60°C (32 ~ 140°F) 
Stack: 0~ 50°C (32 ~ 122°F)
Power Supply Power Connector 2-pin removable 
screw terminal
Power Input 1 x Unregulated 
10 ~ 30 VDC

 

 

EKI-6528TI

EN50155 8-port M12 Unmanaged Switch with Wide Temperature


Main Features

  • Auto Bypass between Port 1 and Port 2
  • EN50155 certified
  • Backplane (Switching Fabric): 1.6 Gbps
  • Wide redundant power design
  • 8-port 10/100Mbps M12 type connector with IP-40 protection
  • Dual redundant power input
  • Supports wide operating temperature (-40~ 75° C)

Certifications
  • EN50155
 
Introduction

EKI-6528TI and EKI-6528TPI are EN50155 certified industrial switches with IP40 protection and wide temperature support designed for railway applications. EKI-6528TPI provides 4 x PoE ports that support IEEE 802.3af and can provide up to 15.4 watts of power per port. M12 connectors ensure highly reliable connectivity for industrial communication applications. With IP40 compact metal housings, these switches are protected against dusty environments and are a good fit for many industrial applications. Under no-power condition, 'Auto Bypass' function ensures the Ethernet signal connection through internal circuitry. This feature provides non-stop communication to rolling stocks even no power exists in some of the carriages. 
Specifications
Part Number EKI-6528TI-AE
Communications LAN 10/100Base-T(X)
Transmission Speed Up to 100Mbps
Environment Operating Temperature -40 ~ 75° C (-40 ~ 167° F)
General Certifications CE/FCC
Ethernet Connectors -
Mounting DIN-rail, Wallmount
I/O Transmission Distance Ethernet : Up to 100m
Transmission Speed UP to 100 Mbps
Interface Ethernet M12, 4-pole D-coded, Female x 8
Mechanism Dimensions (W x H x D) 92 x 180 x 42 mm
Enclosure IP40 protected metal shell
Mounting DIN-rail, Wall mount
Operating System Operating Temperature -40 ~ 75°C (-40 ~ 167°F)
Power Supply Power Connector M12, 5-pole A-coded, male x 1
Power Input 12~ 48 VDC, redundant dual inputs
Protection Power Reverse Present

 

 

EKI-6528TPI

EN50155 8-port M12 Unmanaged PoE Switch with Wide Temperature


Main Features

  • Auto Bypass between Port 1 and Port 2
  • EN50155 certified
  • Backplane (Switching Fabric): 1.6 Gbps
  • Wide redundant power design
  • 4-port PoE type M12
  • Dual redundant power input
  • Supports wide operating temperature (-40~ 75° C)

Certifications
  • EN50155
 
Introduction

EKI-6528TI and EKI-6528TPI are EN50155 certified industrial switches with IP40 protection and wide temperature support designed for railway applications. EKI-6528TPI provides 4 x PoE ports that support IEEE 802.3af and can provide up to 15.4 watts of power per port. M12 connectors ensure highly reliable connectivity for industrial communication applications. With IP40 compact metal housings, these switches are protected against dusty environments and are a good fit for many industrial applications. Under no-power condition, 'Auto Bypass' function ensures the Ethernet signal connection through internal circuitry. This feature provides non-stop communication to rolling stocks even no power exists in some of the carriages. 
Specifications
Part Number EKI-6528TPI-AE
General Certifications CE/FCC
Ethernet Connectors -
Mounting DIN-rail, Wallmount
I/O Transmission Distance Ethernet : Up to 100m
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -40 ~ 75°C (-40 ~ 167°F)
Power Supply Power Connector M12, 5-pole A-coded, male x 1
Power Input 24 ~ 48 VDC, redundant dual inputs
Protection Power Reverse Present
Interface Ethernet M12, 4-pole D-coded, Female x 8
Communications LAN 10/100Base-T(X)
Transmission Speed Up to 100Mbps
Environment Operating Temperature -40 ~ 75° C (-40 ~ 167° F)
Mechanism Dimensions (W x H x D) 92 x 180 x 42 mm
Enclosure IP40 protected metal shell
Mounting DIN-rail, Wall mount

 

 

EKI-6558TI

EN50155 IP67 8-port M12 Managed Ethernet Switch with Wide Temperature


Main Features

  • EN50155 certified
  • Backplane (Switching Fabric): 2 Gbps
  • Supports X-Ring function (ultra high-speed recovery time <10ms)
  • Wide redundant power design
  • Provides M12 connector with IP67 protection
  • Provides Waterproof fiber optic connector
  • TFTP firmware updates and system configure restore and backup
  • Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperature -40~ 75° C
  • Provides 100Mbps LC type connector

Certifications
  • EN50155
 
Introduction

EKI-6558TI and EKI-6559TMI are EN50155 certified IP67 wide temperature industrial switches which are especially designed for railway industry and harsh environments. M12 connectors secure highly reliable connectivity for industrial communication applications. EN50155 certification ensures the use of railway application. EKI-6559TMI also provides two additional fiber optic ports to extend communication range. Both EKI-6558TI and EKI-6559TMI provide Advantech's X-Ring protocol, which enables users to establish a redundant Ethernet network with ultra high-speed recovery (less than 10ms). They also support advanced network standards to optimize network performance, reduce maintenance cost, and secure network safety. 
Specifications
Part Number EKI-6558TI-AE
Communication LAN 10/100Base-T(X)
Standard IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af
Transmisssion Speed Up to 100Mbps
Environment Operating Temperature -40 ~ 75° C (-40 ~ 167° F)
Storage Temperature - 40 ~ 85° C (-40 ~185° F)
General Certifications CE/FCC, UL 508
Interface Ethernet M12, 4-pole D-coded, Female x 8
Mechanism Dimensions (W x H x D) 192 x 176 x 62.5 mm
Enclosure IP67 protected metal shell
Mounting Wall mount
Power P-Fail Connector M12, 8-pole A-coded, Female x 1
P-Fail Output 1A @ 24 VDC
Power Connector M12, 5-pole A-coded, male x 1
Power Consumption 3.36W max. @ 48VDC
Power Input 12 ~ 48 VDC, redundant dual inputs
Protection Power Reverse Present

 

 

EKI-6559TMI

EN50155 IP67 8-port M12 + 2-port Fiber Optic Managed Ethernet Switch with Wide Temperature


Main Features

  • EN50155 certified
  • Backplane (Switching Fabric): 2 Gbps
  • Supports X-Ring function (ultra high-speed recovery time <10ms)
  • Wide redundant power design
  • Provides M12 connector with IP67 protection
  • Provides Waterproof fiber optic connector
  • TFTP firmware updates and system configure restore and backup
  • Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperature -40~ 75° C
  • Provides 100Mbps LC type connector

Certifications
  • EN50155
 
Introduction

EKI-6558TI and EKI-6559TMI are EN50155 certified IP67 wide temperature industrial switches which are especially designed for railway industry and harsh environments. M12 connectors secure highly reliable connectivity for industrial communication applications. EN50155 certification ensures the use of railway application. EKI-6559TMI also provides two additional fiber optic ports to extend communication range. Both EKI-6558TI and EKI-6559TMI provide Advantech's X-Ring protocol, which enables users to establish a redundant Ethernet network with ultra high-speed recovery (less than 10ms). They also support advanced network standards to optimize network performance, reduce maintenance cost, and secure network safety. 
Specifications
Part Number EKI-6559TMI-AE
Communications LAN 10/100Base-T(X)
Standard IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af
Transmission Speed Up to 100Mbps
Environment Operating Temperature -40 ~ 75° C (-40 ~ 167° F)
Storage Temperature - 40 ~ 85° C (-40 ~185° F)
General Certifications CE/FCC, UL 508
Interface Transmission Distance Ethernet : Up to 100m
Transmission Speed UP to 100 Mbps
Interface Ethernet M12, 4-pole D-coded, Female x 8
Mechanism Dimensions (W x H x D) 192 x 176 x 62.5 mm
Enclosure IP67 protected metal shell
Mounting Wall mount
Power P-Fail Connector M12, 8-pole A-coded, Female x 1
P-Fail Output 1A @ 24 VDC
Power Connector M12, 5-pole A-coded, male x 1
Power Consumption 3.36W max. @ 48VDC
Power Input 12 ~ 48 VDC, redundant dual inputs
Protection Power Reverse Present

 

 

More Articles ...

  1. EKI-7659CPI
  2. EKI-2525P
Page 66 of 156
  • Omron

Omron

CP1E

Compact and cost-effective

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept. Lean Automation fits into stand-alone machines or modules within a larger machine. Its merit lies in its simplicity, compactness and economically attractive solutions.  

  • 6 high-speed counter inputs and 2 high speed pulse outputs
  • Instruction set upwards compatible with CP1H, CJ1, and CS1
  • Optional RS232C and RS-422/485 serial ports for N-type application model
  • Simple motion functions including Modbus-RTU simple master
          Features  | Lineup |  Specifications