• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

Analog input/output module SM 534

The analog input/output module SM 534 offers 4 analog inputs and 2 analog outputs at a very small footprint and is therefore suited for use in the tightest spaces. 
The narrow 25 mm module with Standard functionality uses push-in technology, the front connector as well as the components for shielding like power supply element, shield bracket, and shield terminal are included in the scope of delivery.
Like other 25 mm modules the SM534 can be used side by side with 35 mm modules in one station.

Analog input/output module with 25mm width

et200mp analog in output 25mm 200
 

 

SM 534 AI/AQ 4xU/I/RTD/TC / 2xU/I ST

Standard analog input/output module with 4 inputs and 2 outputs
(resistance and resistance thermometer measuring limited to 2 channels)

  • 4 inputs, measurement types: current, voltage, resistance,
    resistance thermometers, thermocouples

  • resolution 16 bits

  • one potential group

  • accuracy +/-0.3%

  • common mode voltage 10 V

  • parameterizable diagnostics

  • hardware interrupts (two upper and lower limits)

  • calibration during execution time

  • 2 outputs: current, voltage,

  • resolution 16 bits

  • accuracy +/-0.3%

  • one potential group

  • parameterizable diagnostics

  • parameterizable substitute values for the outputs

  • calibration during execution time

  • Article No.: 6ES7534-7QE00-0AB0

 

Failsafe I/O Module SM 526

The failsafe S7-1500 /ET 200MP I/O modules allow the processing of safety related as well as standard programs. Their functional safety is certified in accordance with IEC 61508 (2nd Edition). They are designed for safety-related use up to SIL 3 according to IEC 62061 and PL e according to ISO 13849.

 

Digital input F-DI 16x24VDC PROFIsafe

Digital input F-DI 16x24VDC PROFIsafe
 

 

  • 16 inputs (SIL3/Category 3/PLd) or 8 inputs (SIL3/Category 4/PLe)

  • Sensor evaluation 1v1 (1oo1) und 2v2 (1oo2)

  • Channel and module passivation

  • Four channel groups with four channels each

  • Internal short-circuit proof encoder supply per channel group

  • External sensor power supply possible

  • Supports FW update und I&M data

  • Article No.: 6ES7526-1BH00-0AB0

Digital output F-DQ 8x24VDC/2A PPM PROFIsafe

Digital output F-DQ 8x24VDC/2A PPM PROFIsafe
 

 

  • Eight outputs in two channel groups (SIL3/Category 4/PLe)

  • Settable (for each module): PM or PP switching

  • Output current 2A per output

  • Channel and module passivation

  • Supports FW update und I&M data

  • Article No.: 6ES7526-2BF00-0AB0

 

SIMATIC ET 200MP Technology Modules

Technology modules offer hardware-level signal processing for rapid counting, measurement and position registration for a variety of transducers.

Technological functions such as motion control and high speed counter are already integrated in the SIMATIC S7-1500 CPUs and plannable via STEP 7 (TIA Portal)

Benefits

  • Rapid signal preprocessing for counting and measuring tasks in the high-speed range

  • Position detection for incremental and SSI absolute value encoders

  • Easy to use parameter assignment interface already integrated in SIMATIC STEP 7 (TIA Portal)

  • Efficient programming using technology objects

  • Fast reactions due to different hardware interrupts for internal/external events and count values

  • Reaction of modules to "CPU stop" can be configured

  • Can be operated centrally in the S7-1500 and distributed in the ET 200MP I/O system


Product range

The following Technology Modules for ET 200MP or S7-1500 are available:

 

TM Count 2x24V Counter Module

SIMATIC ET 200MP TM Count
 

The technology module TM Count 2x24V for 24 Volt input signals is a universal counter module for counting and measuring tasks as well as position input with incremental encoders. The module offers measuring functions for velocity and frequency as well as signal acquisition up to 200 kilohertz and is suitable for sophisticated tasks, for example, in the packaging, food or paper industry.

  • Supported encoder/signal types:
    - 24 V incremental encoder with and without signal N,
    - 24 V pulse encoder with direction signal,
    - 24 V pulse encoder without direction signal,
    - 24 V pulse encoder for forward & backward pulses

  • Max. counting frequency 200 kHz (800 kHz with quadruple evaluation)

  • Integrated DI: 3 digital inputs for control of the counting process, for saving or setting the counter values

  • Integrated DQ: 2 digital outputs for fast reaction depending of counter reading or measured value

  • Counting functions: Settable counting range up to +/- 2^31 bits

  • Measurement functions:  Flexible adjustment of measurement time and selectable output unit

  • Diagnostic interrupt: For example in case of errors at the load voltage or encoder

  • Configurable hardware interrupt

  • Supported system functions:  Isochronous mode, firmware update, identification data I&M

Article No: 6ES7550-1AA00-0AB0

 

TM Posinput 2 Counting and Position Detection Module

The ET 200MP TM PosInput 2 counting and position detection module offers two counting channel for differential input signals according to RS422 up to 1 MHz, as well as position detection with the aid of SSI absolute value encoders.
The connection of 5V TTL signals is also possible for the counting function.

  • Connection of SSI absolute value encoders
    - Frame lengths from 10 to 40 bits
    - Position values up to 31 bits
    - Forwarding of encoder status information

  • Counting of different signal shapes of the count signal
    - 1-track count signal, e.g. for counting products or detecting flow or energy volume
    - 2 separate count signals for forwards and backwards,
      e.g. for detecting the content of a container with inflow and outflow
    - 1 count signal with an additional direction signal
    - 2 tracks with 90° phase offset, optionally with zero track for detecting positions with incremental encoders

  • Measuring functions for Measuring frequency, period length and speed in selectable unit

  • 2 digital inputs per channel
    - for fast control of the count process by means of a HW gate
    - for saving the count value
    - for setting a count value due to an event

  • 2 digital outputs per channel for high-speed responses
    - depending on the counter value or position value
    - depending on the measured value

  • Integrated 24 V power supply for the encoders

  • Position detection for Motion Control in S7-1500 from Step 7 (TIA Portal V13)

  • The functionality and operator interface are compatible with the ET 200SP TM PosInput 1 module and allow simple switching between the I/O families S7-1500/ET200 MP and ET 200SP.

 
Typical applications:

  • Detection of positions

  • Detection of speeds

  • Detection of product lengths

  • Dosing of fill quantities

  • Application of adhesive beads

  • Measurement of workpieces

Article No. 6ES7551-1AB00-0AB0

 

TM Timer DIDQ 16x24V Time-based IO Module

ET 200 MP Timermodul
 

The time-based IO module ET 200MP TM Timer DIDQ 16x24V fulfills the highest demands for precision and speed, independent of the controller performance and the fieldbus.
Time-based IO assures that the signals are read-in and output precisely - to within 1 microsecond!

  • Up to 8 digital inputs with the following functions::
    -  Up to 8 digital inputs with the following functions:
    - Up to 2 time stamps per cycle
    - 32x oversampling
    - Counting function up to 50 kHz
    - Incremental encoder acquisition with 2 phase-shifted traces

  • Up to 16 digital outputs with the following functions:
    - Up to 2 time stamps per cycle
    - 32 x oversampling
    - Pulse width modulated output

  • Various combinations of digital inputs and outputs can be configured:
    - 0 digital inputs /16 digital outputs (for cam applications with many outputs)
    - 3 digital inputs /13 digital outputs (for configurations similar to FM 352)
    - 4 digital inputs /12 digital outputs (for flexible mixed operation)
    - 8 digital inputs / 8 digital outputs (for probes and incremental encoders)


Typical applications:

  • Exact definition of reaction times, independent of application cycle

  • Cam controller

  • Probes

  • Length measurement

  • Dosing of fluid quantities

  • Time measurement

Article No.:6ES7552-1AA00-0AB0

SIWAREX WP521 ST and WP522 ST Weighing Modules

SIWAREX WP521 Weighing Module
 

The two technology modules are the perfect solution for the seamless integration of standard weighing applications like platform or hopper scales in SIMATIC S7-1500.
The technology module is available in single and dualchannel variants. SIWAREX WP521 ST is the single-channel option for one scale while the dual-channel SIWAREX WP522 ST enables two separate scales to be integrated into the automation system - with same space requirements.

Integrated in SIMATIC S7-1500 all advantages of the automation system can be used. The free “ready-for-use“ application helps to create fast and easily customer and application specific solutions

Feature

 

Integration in automation systems

SIMATIC S7-1500/ET 200MP
Other Systems via Modbus RTU or Modbus TCP/IP

Communication interfaces (on board)

SIMATIC S7-1500 system bus
Per channel 1x RS485 (Modbus RTU, remote display)
Ethernet (Modbus TCP/IP,SIWATOOL)
Per channel 4x digital outputs (24V DC)
Per channel 3x digital inputs (24V DC)

Internal resolution

Up to +/- 4 million parts

Measuring rate

100/120 Hz

Typical applications

Basic scales, e.g. platform and hopper scales
gravimetric level measurement of silos and hoppers

Article No:

SIWAREX WP521 ST: 7MH4980-1AA01
SIWAREX WP522 ST: 7MH4980-2AA01
 

S7-1500 Communication Modules

Interfaces for communication via PROFINET and in part PROFIBUS DP as well are already integrated in the S7-1500 CPUs. Communication modules increase the communication capabilities of the
S7-1500 through additional communication functions or more interfaces.
Communication modules enhance flexibility and performance of automation solutions using the SIMATIC S7-1500/ET 200MP. Additional interfaces enable realization of complex automation structures or process optimization through connection to the enterprise management level.

modules for data exchange using point-to-point coupling

Within a centralized architecture with SIMATIC S7-1500 as well as in decentralized architecture with SIMATIC ET 200MP PtP Communication Moules are employed. Serial interfaces can be used to connect e.g. barcode or RFID readers for non-contact data transmission.
Four communication modules are available for connecting automation components via serial interfaces.

module for connecting to Industrial Ethernet

CP 1543-1

With high-performance communication functions and integrated security functionality, the CP 1543-1 communication module opens up additional areas of use for the S7-1500.

  • Secure connection to Industrial Ethernet via Stateful Inspection Firewall in addition to CPU password protection

  • Configurable access rights for local and remote access

  • Simple alarms via email and transmission of production data to control computer via FTP(S) file transfer

  • Flexible integration in IPv6-based infrastructure

  • Possibility of segmentation for constructing identical machines with the same IP addresses

  • Overall project planning – including security functionality – integrated in TIA portal

module for connecting to PROFIBUS

CM 1542-5 PROFIBUS

The CM 1542-5 supports the functions PROFIBUS DP-Master and PROFIBUS DP-Slave according to international standard IEC 61158/61784. This module enables connection of PROFIBUS devices to S7-1500 controllers that do not have a PROFIBUS interface on the CPU

  • Simple expansion of the system using additional PROFIBUS strands

  • Separation of PROFIBUS subnets for separate automation tasks possible

  • Enhanced system performance by relieving the S7-1500 CPU of communication tasks

  • Connection of PROFIBUS slaves from external vendors

  • Cost-effective module replacement through network separation in the event of a failure

  • Project planning integrated in TIA Portal V12

Technical Data

download


 

More Articles ...

  1. S7-1500 Signal modules
  2. S7-1500 Technology modules
Page 154 of 156
  • Omron

Omron

CP1E

Compact and cost-effective

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept. Lean Automation fits into stand-alone machines or modules within a larger machine. Its merit lies in its simplicity, compactness and economically attractive solutions.  

  • 6 high-speed counter inputs and 2 high speed pulse outputs
  • Instruction set upwards compatible with CP1H, CJ1, and CS1
  • Optional RS232C and RS-422/485 serial ports for N-type application model
  • Simple motion functions including Modbus-RTU simple master
          Features  | Lineup |  Specifications