• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

PCL-745B

2-port RS-422/485 Cards with 3000 VDC isolation protection


Main Features

  • Two independent RS-422/485 serial ports
  • Provides 3000 VDC isolation
  • 16C550 UARTs with on-chip 16-byte FIFO
  • Transmission speeds up to 921.6 kbps
  • I/O address and interrupt selectable
  • Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
  • Supports 2 wire or 4 wire operation
  • Supports Tx, Rx, RTS, and CTS signals
  • Automatic RS-485 data flow control or RTS control
  • Termination resistors jumper enable/disable
  • Space reserved for optional surge protection on data lines
  • Supports Windows® 98/2000/XP, Linux®
 
Introduction

The PCL-745 series card provides two RS-422/485 serial ports.Each port utilizes a 16C550 UART with an on-chip 16-byte FIFO buffer for reliable, high-speed serial I/O. The UART buffer divides data into 16-byte packets before sending them onto the bus. This drastically reduces the CPU load and avoids data loss due to failure to respond to the interrupt request in time. The UART is especially useful for high speed serial I/O under Windows. The PCL-745B card differs from the PCL-743B card in that the former uses on-board optical isolators to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments.
Specifications
Part Number PCL-745B-BE
Communication<br>Interfaces CAN -
Current Loop -
RS-232 -
RS-422 V
RS-485 V
Display Ports 4
Network Cable Connector Type N/A
Protection Isolation 3000 VDC
Surge -

 

 

  • Siemens
Siemens offers a wide range of Programmable Logic Controllers (PLC). S7-1200 PLC is suitable for small individual machine applications, whereas S7-300 PLC was previously targeted towards medium to high demand applications. However since it is nearing its end-of-lifecycle, S7-300/400 PLC series have been supplemented with the innovative S7-1500 PLC series. A new range of HMI panels are also available in all sizes for suitable operator control/monitoring. S7-1200 and S7-1500 are both part of Totally Integrated Automation (TIA) platform and programmable via Siemens TIA Portal software.
Simatic 300

          SIMATIC S7-300

 
Simatic 1200

         SIMATIC S7-1200

 
Simatic 1500

         SIMATIC S7-1500

 

s7 400

          SIMATIC S7-400

 
Simatic HMI

          SIMATIC HMI