C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
+92-21-35070751
+92-300-5776703
The intelligent FM 350-1 counter module has one counting channel for up and down counting, and is an excellent choice for universal high-frequency counting tasks up to 500 kHz.
It also features measuring functions for speed, frequency and period length. In distributed configurations with S7-400 or WinAC RTX, the FM 350-1 supports isochrone mode.
The FM 351 is a module for adjusting and positioning mechanical axes based on the rapid traverse/creep speed principle. With this module, two axes can be positioned independently of one another. The axes to be positioned may be linear axes with limited traversing range and continuously rotating rotary axes. Incremental encoders and SSI encoders can be used for position decoding. The FM 351 is used in the SIMATIC S7-300, C7 and in the ET 200M on S7-masters as well as with WinAC Basis and WinAC Slot 41x.
The FM 352 electronic cam controller is a 1-channel module for solving position- or time-dependent tasks.
They are far superior to mechanical cam controllers, particularly thanks to their high level of flexibility.
Either an incremental encoder, an SSI encoder or a 24 V initiator can be connected.
32 cam tracks can be read from the automation system's CPU.
13 cam tracks can be output directly over integrated digital outputs
The module can be quickly adapted to the relevant cam control application by means of parameters.
The FM 352 off-loads the CPU thanks to autonomous, actual value-dependent setting and resetting of electronic cams
The FM 352 is used in the SIMATIC S7-300, C7 and ET 200M on S7 masters
Ultra-high-speed binary logic operations and the fastest possible path-dependent switching operations combined with exceptionally little jitter - Those are the strengths of the SIMATIC FM 352-5 application module.
With a cycle time of only 1 µs, it is clearly superior to any conventional PLC CPU.
Whether you want to increase the machine cycles, produce products of the highest quality, or prevent machine or tool damage - the FM 352-5 is exactly the right choice.
Ultra-high-speed switching and logic operations
More productivity, less waste, fewer downtimes
FastConnect I/O terminals right on board:
12 digital inputs
8 digital outputs
1 position encoder (SSI, 5V and 24V incremental encoders)
Preprogrammed standard blocks shorten engineering time
Freely programmable in LAD and CSF with limited operations set using established standard STEP 7 software
For universal use in different control system configurations
Available in two different versions with current-sourcing or current-sinking outputs
