Siemens

Address

C-188, Sector 31-D, P&T Society,

Korangi Industrial Area,

Karachi-74900,

Pakistan
Call us on

+92-21-35070751

+92-300-5776703
Mail us @

info@pakplc.com

ADAM-6541

Ethernet to Multi-mode Fiber Optic Converter
		Main Features Supports 1-port 100 Mbps multimode fi ber optics Supports 10 ~30 VDC power input Easily mounted on a DIN-rail, panel or piggyback Supports full/half-duplex fl ow control. Supports MDI/MDIX auto crossover. Embedded with a switch controller, supports auto-negotiation. Embedded with memory buffer, supports store and forward transmission.

Introduction
The ADAM-6541 is an industrial grade converter which is designed to convert Ethernet network (10/100Base-TX) to fiber network (100Base-FX). It transparently converts Ethernet signals into optic signals. The advantages of fiber optics are wide bandwidth, anti-EMI and suitable for long-distance transmission. Therefore, the ADAM-6541 is an ideal solution for "fiber to building" application at central offices or local sites.
Specifications
Part Number		ADAM- 6541-AE
General	Ethernet Connectors	1 x RJ-45 1 x SC type fiber connector
	Mounting	IP30, ABS+PC with solid mounting kits
I/O	Transmission Distance	Ethernet: Up to 100 m Fiber:Multi-mode: Up to 2 km Single-mode: Up to 20km
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	0 ~ 60°C (32 ~ 140°F) Stack: 0~ 50°C (32 ~ 122°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

ADAM-6541/ST

10/100Base-TX Ethernet to 100Base-FX Multi-mode ST Type Fiber Optic Converter
		Main Features Supports full/half duplex flow control Supports Integrated Loop-up engine Supports MDI/MDI-X auto crossover Provides broadcast storm protection Supports +10 ~ 30 VDC voltage power input Provides surge protection (EFT) 3,000 VDC for power line Provides flexible mounting: DIN-rail, panel, piggyback Supports operating temperatures from -10 ~ 65° C Embedded a switch controller-supports auto-negotiation Embedded a memory buffer-supports store and forward transmission

Introduction
ADAM-6541/ST is an industrial-grade converter designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541/ST are ideal solution for “fiber to building” applications at central offices or local sites. ADAM-6541/ST supports MDI/MDIX auto detection, so you don't need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps) automatically. Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data cane be transmitted properly. ADAM-6541/ST is extremely compact and can be mounted in three different ways: DIN-rail, panel and piggyback. ADAM-6541 and ADAM-6542 can operate from -10 ~ 65° C and accept a wide voltage range from +10 ~ 30 VDC. Besides, it also provides 3,000VDC surge protection (EFT) against over-voltage so it is suitable for harsh operating environments.
Specifications
Part Number		ADAM-6541/ST-AE
General	Ethernet Connectors	1 x ST type fiber connector
	Mounting	IP30, ABS+PC with solid mounting kits
I/O	Transmission Distance	Ethernet: Up to 100 m Fiber:Multi-mode: Up to 2 km Single-mode: Up to 20km
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	0 ~ 60°C (32 ~ 140°F) Stack: 0~ 50°C (32 ~ 122°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

EKI-6528TI

EN50155 8-port M12 Unmanaged Switch with Wide Temperature
		Main Features Auto Bypass between Port 1 and Port 2 EN50155 certified Backplane (Switching Fabric): 1.6 Gbps Wide redundant power design 8-port 10/100Mbps M12 type connector with IP-40 protection Dual redundant power input Supports wide operating temperature (-40~ 75° C) Certifications EN50155

Introduction
EKI-6528TI and EKI-6528TPI are EN50155 certified industrial switches with IP40 protection and wide temperature support designed for railway applications. EKI-6528TPI provides 4 x PoE ports that support IEEE 802.3af and can provide up to 15.4 watts of power per port. M12 connectors ensure highly reliable connectivity for industrial communication applications. With IP40 compact metal housings, these switches are protected against dusty environments and are a good fit for many industrial applications. Under no-power condition, 'Auto Bypass' function ensures the Ethernet signal connection through internal circuitry. This feature provides non-stop communication to rolling stocks even no power exists in some of the carriages.
Specifications
Part Number		EKI-6528TI-AE
Communications	LAN	10/100Base-T(X)
Communications	Transmission Speed	Up to 100Mbps
Environment	Operating Temperature	-40 ~ 75° C (-40 ~ 167° F)
General	Certifications	CE/FCC
	Ethernet Connectors	-
	Mounting	DIN-rail, Wallmount
I/O	Transmission Distance	Ethernet : Up to 100m
I/O	Transmission Speed	UP to 100 Mbps
Interface	Ethernet	M12, 4-pole D-coded, Female x 8
Mechanism	Dimensions (W x H x D)	92 x 180 x 42 mm
	Enclosure	IP40 protected metal shell
	Mounting	DIN-rail, Wall mount
Operating System	Operating Temperature	-40 ~ 75°C (-40 ~ 167°F)
Power Supply	Power Connector	M12, 5-pole A-coded, male x 1
Power Supply	Power Input	12~ 48 VDC, redundant dual inputs
Protection	Power Reverse	Present

EKI-6528TPI

EN50155 8-port M12 Unmanaged PoE Switch with Wide Temperature
		Main Features Auto Bypass between Port 1 and Port 2 EN50155 certified Backplane (Switching Fabric): 1.6 Gbps Wide redundant power design 4-port PoE type M12 Dual redundant power input Supports wide operating temperature (-40~ 75° C) Certifications EN50155

Introduction
EKI-6528TI and EKI-6528TPI are EN50155 certified industrial switches with IP40 protection and wide temperature support designed for railway applications. EKI-6528TPI provides 4 x PoE ports that support IEEE 802.3af and can provide up to 15.4 watts of power per port. M12 connectors ensure highly reliable connectivity for industrial communication applications. With IP40 compact metal housings, these switches are protected against dusty environments and are a good fit for many industrial applications. Under no-power condition, 'Auto Bypass' function ensures the Ethernet signal connection through internal circuitry. This feature provides non-stop communication to rolling stocks even no power exists in some of the carriages.
Specifications
Part Number		EKI-6528TPI-AE
General	Certifications	CE/FCC
	Ethernet Connectors	-
	Mounting	DIN-rail, Wallmount
I/O	Transmission Distance	Ethernet : Up to 100m
I/O	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	-40 ~ 75°C (-40 ~ 167°F)
Power Supply	Power Connector	M12, 5-pole A-coded, male x 1
Power Supply	Power Input	24 ~ 48 VDC, redundant dual inputs
Protection	Power Reverse	Present
Interface	Ethernet	M12, 4-pole D-coded, Female x 8
Communications	LAN	10/100Base-T(X)
Communications	Transmission Speed	Up to 100Mbps
Environment	Operating Temperature	-40 ~ 75° C (-40 ~ 167° F)
Mechanism	Dimensions (W x H x D)	92 x 180 x 42 mm
	Enclosure	IP40 protected metal shell
	Mounting	DIN-rail, Wall mount

More Articles ...

Page 82 of 195

Siemens

Siemens offers a wide range of Programmable Logic Controllers (PLC). S7-1200 PLC is suitable for small individual machine applications, whereas S7-300 PLC was previously targeted towards medium to high demand applications. However since it is nearing its end-of-lifecycle, S7-300/400 PLC series have been supplemented with the innovative S7-1500 PLC series. A new range of HMI panels are also available in all sizes for suitable operator control/monitoring. S7-1200 and S7-1500 are both part of Totally Integrated Automation (TIA) platform and programmable via Siemens TIA Portal software.

Simatic 300

SIMATIC S7-300

Simatic 1200

SIMATIC S7-1200

Simatic 1500

SIMATIC S7-1500

s7 400

SIMATIC S7-400

Simatic HMI

SIMATIC HMI