| 2-port Programmable Device Server | ||
 |
|
|
| Introduction | ||
|
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications. |
||
| Specifications | ||
| Part Number | EKI-1122L-AE | |
| Ethernet Interface | Connector | RJ-45 |
| LAN | 2 x auto-sensing 10/100 Mbps ports | |
| Serial Interface | Connector | D-sub 9 male |
| Serial Standards | Software selectable RS-232/422/485 ports | |
| Software (uClinux) | Kernel Version | 2.4.31 |
| Protocol Stack | TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE | |
| System | CPU | ARM7 32-bit RISC CPU, 80 MHz |
| Flash | 8 MB | |
| OS (pre-installed) | uClinux | |
| SDRAM | 16 MB | |
-
Address
C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
-
Call us on
+92-21-35070751
+92-300-5776703
-
Programmable Device Servers
Advantech's EKI-1100 Industrial RISC-based Communication Controller comes with versatile peripherals interfaces, communication capabilities, and storage expandability. The EKI-1100 uses the ultra-low power ARM7 processor or Intel Xcale processor and it is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in Flash ROM and SDRAM provide user enough storage to run their specific applications.
| Product | ||
| Model Number | Description | |
| EKI-1121L | 1-port Programmable Device Server | |
| EKI-1122L | 2-port Programmable Device Server | |
Advantech Serial Device Servers
Advantech's Serial Device Servers are easy to install and configure, support wired and wireless networking and provide various operation modes to satisfy rigorous industrial automation needs. EKI-1000 Serial Device Servers enable RS-232/422/485 serial devices to be dual-connected to Ethernet switches for unrivaled reliability. Product line covers wired and wireless (WLAN, GPRS, 3G) serial device server, modbus gateway, and programmable device server.
|
Product Catagories
| |
|---|---|
 |
The serial device servers enable RS-232/422/485 serial devices to be connected to a host computer over an Ethernet network quickly and cost-effectively. No extra programming effort is required at the host computer, so software development costs can be saved. Serial device servers are especially suitable for remotely controlling and monitoring your serial devices via the Ethernet. |
 |
The Modbus Serial Device Server as an interface between Modbus serial devices and computer hosts running Modbus/TCP on Ethernet networks. Fully compliant with Modbus/TCP, the Modbus Serial Device Server offers a convenient solution to connect existing devices or controllers running Modbus serial protocol (Modbus/ASCII or Modbus/RTU) to an Ethernet network. |
 |
Advantech's EKI-1100 Industrial RISC-based Communication Controller comes with versatile peripherals interfaces, communication capabilities, and storage expandability. The EKI-1100 uses the ultra-low power ARM7 processor or Intel Xcale processor and it is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in Flash ROM and SDRAM provide user enough storage to run their specific applications. |
EKI-1121L
| 1-port Programmable Device Server | ||
 |
|
|
| Introduction | ||
|
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications. |
||
| Specifications | ||
| Part Number | EKI-1121L-AE | |
| Ethernet Interface | Connector | RJ-45 |
| LAN | 2 x auto-sensing 10/100 Mbps ports | |
| Serial Interface | Connector | D-sub 9 male |
| Serial Standards | Software selectable RS-232/422/485 ports | |
| Software (uClinux) | Kernel Version | 2.4.31 |
| Protocol Stack | TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE | |
| System | CPU | ARM7 32-bit RISC CPU, 80 MHz |
| Flash | 8 MB | |
| OS (pre-installed) | uClinux | |
| SDRAM | 16 MB | |
More Articles ...
- Siemens
Siemens offers a wide range of Programmable Logic Controllers (PLC). S7-1200 PLC is suitable for small individual machine applications, whereas S7-300 PLC was previously targeted towards medium to high demand applications. However since it is nearing its end-of-lifecycle, S7-300/400 PLC series have been supplemented with the innovative S7-1500 PLC series. A new range of HMI panels are also available in all sizes for suitable operator control/monitoring. S7-1200 and S7-1500 are both part of Totally Integrated Automation (TIA) platform and programmable via Siemens TIA Portal software.
