• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-4056SO

12-ch Source Type Isolated Digital Output Module with Modbus


Main Features

  • DO Source Power Failure Detection
  • I/O Type: Source Type Output
  • 12 Channels
  • Digital Output: VCC: 1-~35 Vdc, Current: 1A (per ch.)
  • Over Current Detection
 
Introduction


12-channel Source Type Isolated Digital Output Module
Specifications
Part Number ADAM-4056SO-AE
Analog Input Burn-out Detection -
Channel Independent Configuration -
Current Input -
Direct Sensor Input -
Voltage Input -
Analog Output Current Output -
Voltage Output -
Digital Output Digital Input 
Channel		 -
Digital Ouput 
Channel		 12 (Source)
Other Isolation 5000 VDC

ADAM-4060

4-ch Relay Output Module


Main Features

  • 4-channels relay, two Form A and two Form C
  • Breakdown voltage: 500 VAC (50/60 Hz)
  • Insulation resistance: 1000 M ohms minimum at 500 V DC
 
Introduction


The ADAM Relay Output Module is a low-cost alternative to SSR modules. The ADAM Relay Output Module provides four relay channels, two of Form A and two of Form C. This module is excellent for ON/OFF control or low-power switching applications.
Specifications
Part Number ADAM-4060-DE
Digital Input Channles -
Input Voltage -
Digital Output Channels 4-ch relay
Power Dissipation -
General Isolation -
Watchdog Timer Yes (System)

ADAM-4068

8-ch Relay Output Module with Modbus


Main Features

  • I/O type: 8 channels from C (NO/NC selectable)
  • Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A, DC: 30 V @ 2 A; 110 V @ 0.6 A
  • Switch Time: Relay on time (typical): 3 msec, relay off time (typical): 1 msec.
  • LED Indicators
  • Supports Modbus/RTU protocol
 
Introduction


The ADAM-4068 relay module is controlled remotely and store configuration data in EEPROM. The ADAM-4068 provides 4/8 channels, half being Form A and the rest being Form C. These modules are excellent for on/off control or low-power switching applications.
Specifications
Part Number ADAM-4068-BE
Digital Input Channles -
Input Voltage -
Digital Output Channels 8-ch relay
Power Dissipation -
General Isolation -
Watchdog Timer Yes (System & Comm.)

ADAM-4069

8-ch Power Relay Output Module with Modbus


Main Features
 
Introduction


ADAM-4069 is designed for on/off control in high-voltage applications. The major feature of ADAM-4069 is its power relay rating at 240 V AC and 5 A. This range can satisfy most requirements for driving externally controlled devices such as lights, fans, alarm systems, and various electronic devices in industrial automation, security, building and home automation applications. ADAM-4069 also supports the Modbus/RTU protocol and ADAM ASCII commands. Besides, it provides four form A channels and four form C channels.
Specifications
Part Number ADAM-4069-AE
Digital Input Channles -
Input Voltage -
Digital Output Channels 8-ch power relay
Power Dissipation -
General Isolation -
Watchdog Timer Yes (System & Comm.)

More Articles ...

  1. ADAM-4080
  2. ADAM-2031Z
  3. ADAM-2051Z
Page 116 of 195
  • Siemens
Siemens offers a wide range of Programmable Logic Controllers (PLC). S7-1200 PLC is suitable for small individual machine applications, whereas S7-300 PLC was previously targeted towards medium to high demand applications. However since it is nearing its end-of-lifecycle, S7-300/400 PLC series have been supplemented with the innovative S7-1500 PLC series. A new range of HMI panels are also available in all sizes for suitable operator control/monitoring. S7-1200 and S7-1500 are both part of Totally Integrated Automation (TIA) platform and programmable via Siemens TIA Portal software.
Simatic 300

          SIMATIC S7-300

 
Simatic 1200

         SIMATIC S7-1200

 
Simatic 1500

         SIMATIC S7-1500

 

s7 400

          SIMATIC S7-400

 
Simatic HMI

          SIMATIC HMI