Analog output modules SM 532
Analog output modules convert a 16-bit digital value into a current or a voltage and output this to the process. They are suitable, for example, for controlling proportional valves or small servo drives.
Modules with a width a width of 35 mm can be equipped with a front connector using screw terminal or push-in technology, the connector has to be ordered separately.
The narrow 25mm modules use a front connector with push-in technology which is included in the scope of delivery. The modules have the same mechanical structure as the 35 mm modules. They also offer the same operability and the same accessories. Moreover, the pin assignment in the wiring is unchanged. This means that circuit and wiring diagrams can be universally used. For all analog output modules the components for shielding like power supply element, shield bracket, and shield terminal are included in the scope of delivery.
The narrow 25 mm modules can be used side by side with 35 mm modules in one station.
|
Expanded functions for analog outputs |
|---|
|
Oversampling (for SM 532 AQ 8XU/I HS) |
|
The use of the oversampling function requires an isochronous configuration. |
|
Isochronous mode (for SM 532 AQ 4XU/I HF) |
|
With the "Isochronous mode" system property, measured values and process data can be acquired with a fixed system clock. The signal processing until switching on the output terminal occurs in the same system clock. Isochronous mode thus contributes to high quality of the controller and therefore to greater manufacturing precision. Possible fluctuations of the process response times are significantly reduced. Time-assured processing, i.e. the high deterministic response, can be used for a higher machine cycle. |
Analog output modules with 35 mm width
SM 532 AQ 4xU/I ST
Standard analog output module with 4 channels
-
output: current, voltage,
-
16 bit resolution
-
accuracy +/-0.3%
-
one potential group
-
parameterizable diagnostics
-
parameterizable substitute values for the outputs
-
calibration during execution time
-
Article No.: 6ES7532-5HD00-0AB0
SM 532 AQ 4xU/I HF
High Feature analog output module with 4 channels
-
output: current, voltage
-
16 bit resolution
-
accuracy +/-0.1%...+/-0.2%
-
four potential groups
-
common mode voltage 30 VAC / 60 VDC
-
parameterizable diagnostics
-
parameterizable substitute values for the outputs
-
isochronous mode
-
Article No.: 6ES7532-5ND00-0AB0
SM 532 AQ 8xU/I HS
High Speed analog output module with 8 channels
-
output: current, voltage
-
16 bit resolution
-
accuracy +/-0.3%
-
one potential group
-
parameterizable diagnostics
-
parameterizable substitute values for the outputs
-
high speed with 8 channels in 125 µs;
-
oversampling
-
calibration during execution time
-
Article No.: 6ES7532-5HF00-0AB0
Analog output module with 25 mm width
SM 532 AQ 2xU/I ST
Standard analog output module with 2 channels
-
output: current, voltage,
-
16 bit resolution
-
accuracy +/-0.3%
-
one potential group
-
parameterizable diagnostics
-
parameterizable substitute values for the outputs
-
calibration during execution time
-
Article No.: 6ES7532-5NB00-0AB0
Multiple communication ports are available(4 at most) including RS-232, RS-485, CAN
