SIMATIC ET 200MP Technology Modules
Technology modules offer hardware-level signal processing for rapid counting, measurement and position registration for a variety of transducers.
Technological functions such as motion control and high speed counter are already integrated in the SIMATIC S7-1500 CPUs and plannable via STEP 7 (TIA Portal)
Benefits
-
Rapid signal preprocessing for counting and measuring tasks in the high-speed range
-
Position detection for incremental and SSI absolute value encoders
-
Easy to use parameter assignment interface already integrated in SIMATIC STEP 7 (TIA Portal)
-
Efficient programming using technology objects
-
Fast reactions due to different hardware interrupts for internal/external events and count values
-
Reaction of modules to "CPU stop" can be configured
-
Can be operated centrally in the S7-1500 and distributed in the ET 200MP I/O system
Product range
The following Technology Modules for ET 200MP or S7-1500 are available:
TM Count 2x24V Counter Module
The technology module TM Count 2x24V for 24 Volt input signals is a universal counter module for counting and measuring tasks as well as position input with incremental encoders. The module offers measuring functions for velocity and frequency as well as signal acquisition up to 200 kilohertz and is suitable for sophisticated tasks, for example, in the packaging, food or paper industry.
-
Supported encoder/signal types:
- 24 V incremental encoder with and without signal N,
- 24 V pulse encoder with direction signal,
- 24 V pulse encoder without direction signal,
- 24 V pulse encoder for forward & backward pulses -
Max. counting frequency 200 kHz (800 kHz with quadruple evaluation)
-
Integrated DI: 3 digital inputs for control of the counting process, for saving or setting the counter values
-
Integrated DQ: 2 digital outputs for fast reaction depending of counter reading or measured value
-
Counting functions: Settable counting range up to +/- 2^31 bits
-
Measurement functions: Flexible adjustment of measurement time and selectable output unit
-
Diagnostic interrupt: For example in case of errors at the load voltage or encoder
-
Configurable hardware interrupt
-
Supported system functions: Isochronous mode, firmware update, identification data I&M
Article No: 6ES7550-1AA00-0AB0
TM Posinput 2 Counting and Position Detection Module
The ET 200MP TM PosInput 2 counting and position detection module offers two counting channel for differential input signals according to RS422 up to 1 MHz, as well as position detection with the aid of SSI absolute value encoders.
The connection of 5V TTL signals is also possible for the counting function.
-
Connection of SSI absolute value encoders
- Frame lengths from 10 to 40 bits
- Position values up to 31 bits
- Forwarding of encoder status information -
Counting of different signal shapes of the count signal
- 1-track count signal, e.g. for counting products or detecting flow or energy volume
- 2 separate count signals for forwards and backwards,
e.g. for detecting the content of a container with inflow and outflow
- 1 count signal with an additional direction signal
- 2 tracks with 90° phase offset, optionally with zero track for detecting positions with incremental encoders
-
Measuring functions for Measuring frequency, period length and speed in selectable unit
-
2 digital inputs per channel
- for fast control of the count process by means of a HW gate
- for saving the count value
- for setting a count value due to an event -
2 digital outputs per channel for high-speed responses
- depending on the counter value or position value
- depending on the measured value -
Integrated 24 V power supply for the encoders
-
Position detection for Motion Control in S7-1500 from Step 7 (TIA Portal V13)
-
The functionality and operator interface are compatible with the ET 200SP TM PosInput 1 module and allow simple switching between the I/O families S7-1500/ET200 MP and ET 200SP.
Typical applications:
-
Detection of positions
-
Detection of speeds
-
Detection of product lengths
-
Dosing of fill quantities
-
Application of adhesive beads
-
Measurement of workpieces
Article No. 6ES7551-1AB00-0AB0
TM Timer DIDQ 16x24V Time-based IO Module
The time-based IO module ET 200MP TM Timer DIDQ 16x24V fulfills the highest demands for precision and speed, independent of the controller performance and the fieldbus.
Time-based IO assures that the signals are read-in and output precisely - to within 1 microsecond!
-
Up to 8 digital inputs with the following functions::
- Up to 8 digital inputs with the following functions:
- Up to 2 time stamps per cycle
- 32x oversampling
- Counting function up to 50 kHz
- Incremental encoder acquisition with 2 phase-shifted traces -
Up to 16 digital outputs with the following functions:
- Up to 2 time stamps per cycle
- 32 x oversampling
- Pulse width modulated output -
Various combinations of digital inputs and outputs can be configured:
- 0 digital inputs /16 digital outputs (for cam applications with many outputs)
- 3 digital inputs /13 digital outputs (for configurations similar to FM 352)
- 4 digital inputs /12 digital outputs (for flexible mixed operation)
- 8 digital inputs / 8 digital outputs (for probes and incremental encoders)
Typical applications:
-
Exact definition of reaction times, independent of application cycle
-
Cam controller
-
Probes
-
Length measurement
-
Dosing of fluid quantities
-
Time measurement
Article No.:6ES7552-1AA00-0AB0
SIWAREX WP521 ST and WP522 ST Weighing Modules
The two technology modules are the perfect solution for the seamless integration of standard weighing applications like platform or hopper scales in SIMATIC S7-1500.
The technology module is available in single and dualchannel variants. SIWAREX WP521 ST is the single-channel option for one scale while the dual-channel SIWAREX WP522 ST enables two separate scales to be integrated into the automation system - with same space requirements.
Integrated in SIMATIC S7-1500 all advantages of the automation system can be used. The free “ready-for-use“ application helps to create fast and easily customer and application specific solutions
|
Feature | |
|---|---|
|
Integration in automation systems |
SIMATIC S7-1500/ET 200MP |
|
Communication interfaces (on board) |
SIMATIC S7-1500 system bus |
|
Internal resolution |
Up to +/- 4 million parts |
|
Measuring rate |
100/120 Hz |
|
Typical applications |
Basic scales, e.g. platform and hopper scales |
|
Article No: |
SIWAREX WP521 ST: 7MH4980-1AA01 |
Multiple communication ports are available(4 at most) including RS-232, RS-485, CAN
