| 6-ch Relay Output Module | ||
 |
|
|
 Datasheet (PDF) |
||
| Introduction | ||
|
The ADAM-5060 relay output module is a low-cost alternative to SSR modules. It provides 6 relay channels, two of Form A and four of Form C. |
||
| Specifications | ||
| Part Number | ADAM-5060-AE | |
| Communications | Channels | - |
| Type | - | |
| Counter (32-bit) | Channels | - |
| Input Frequency | - | |
| Mode | - | |
| Digital I/O | Digital Input Channel | - |
| Digital Ouput Channel |
6 relay (2 form A/ 4 from C) |
|
Introduction
XC series PLC include XC1(economical type), XC2(basic type), XC3(standard type), XC5(enhanced type). Thinget PLC is
powered by Digital and Analogue Expansion modules, BD boards, motion controllers, PT100, Thermocouple Input
equipped with built-in PID controller, and high precision Analog I/O
XC series PLC Main units contain 14~60 I/O points, PNP / NPN Input selectable, relay or transistor and transistor mixed
output, AC/DC power supply.
Special Function Modules
Realize special functions to match XC series main units, contains Ethernet module T-box, GPRS module and G-BOX
BD board Expansion
A low-cost space saving expansion BD board is available for analog I/O requirements. It can also satisfy users
requirement for an additional communication port.
BD boards are also available for XP3 series PLC and HMI integrated unit. Fast and easy configuration makes
it ideal for monitoring applications
High Speed Operation
Basic instruction execution: 0.02~0.5µS, Scan time: 5ms, Programming Memory: up-to 32K
Simple and Easy installation
Compact structure improves panel space utilization.
Up-to 7 Modules Expandable
Up-to 7 expansion modules can be connected to main CPU allowing user to use a maximum of 288 I/O directly addressable.
Further I/O expansion can be done through MA modules.
Expansion Modules are available in various configurations to meet all application requirements.
Communication
Multiple communication ports are available(4 at most) including RS-232, RS-485, CAN
Bus. Through these user configurable ports user can connect and control numerous
industry standard devices including VFD’s, Temperature controllers, Barcode
readers,and other peripheral devices.
Easy and free Programming Software
XCP-Pro software supports all major PLC programming language standards including Instruction, Ladder, STL, FB and others.
RTC and program Security
Built-in Real Time Clock and battery backed 32K user data memory provide XC series the economic advantage over
its competitors.6-bit ASCII password protection provides program security and prevents unauthorized PLC program
uploading.Self-diagnostic features: Power-on Check, monitor check, battery voltage check, expansion module fault,
and program syntax check.
High Speed Count Interrupt Function
High speed pulse counter with interrupt functions are available for precise application needs. 16-bit and 32-bit set
values are supported.By using of a high speed counter electronic cam function can be emulated
PWM Pulse Width Modulation
With PWM instructions, user can use pulse width
modulation to control UPS,servo motors and VFD’s
XC3-19AR-E, Special PLC Unit
This special PLC module has built-in analog inputs and outputs and makes it highly suitable for a low cost solution to small
machine automation.
It has the following features
Integrated logic control, Digital and Analog I/O in one unit.
- PID temperature control
- 2-channel 32 bit pulse output
- 10 bits analog I/O
- Supports 3-channel AB phase input
- Supports 4-channel single phase high speed count(20KHz)
- Cost, effective, save more space
MA Series Remote I/O Modules
MA series modules can connect with PLC, PLC& HMI integrator, HMI and other devices via RS485 and
Modbus RTU/ASCII protocol.It has various types, can meet all your requirements for remote analog and digital control
PLC Model Chart
Analog Expansion Module Chart
