• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

APAX-5080

4/8-ch High Speed Counter Module


Main Features

  • Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode
  • 4 or 8 counter channels depends on operating modes
  • 32-bit counter range with 1 bit overflow/underflow
  • 1 MHz counter frequency
  • 4 digital input channels with counter gate functionality
  • 4 digital output channels with counter alarm output functionality
  • Over voltage, short circuit and thermal protection design
  • 2500 VDC isolation protection (between channels and backplane)
 
Introduction

Advantech's APAX-5080 Counter Module features up to eight channels and hot-swappable functionality. With its 4/8 counter channels, the APAX-5080 is capable of simultaneously taking counts from multiple sources using any of its five operating modes ( UP, UP/Down, Frequency, Pulse/Direction, and A/B Phase modes), therefore saving hardware installation costs and having greater scalability. The flexibility of the APAX-5080 is enhanced with the additional benefit of four DI counter gates to define when a counter is enabled, and four DO alarm output channels triggered by a specific counter value; so that the APAX-5080 can be configured to send an alarm message when certain criteria are met.
Specifications
Part Number APAX-5080-AE
General Certifications CE, FCC class A
Dimensions (W x H x D) 30 x 139 x 100 mm
Enclosure ABS+PC
Weight 170 g
Power Consumption 2.5 W @ 24 VDC (typical)
Status Display LED per channel (for DI, DO channel)
Counter/Frequency Input Channels and Mode 8 (Up and Frequency mode), 4 (Pulse/Direction, Up/Down, A/B phase mode)
Counting Range 32-bit + 1-bit overflow/ underflow
Minimum Pulse Width 1 µs
Counter Frequency 1 MHz (max.)
Input Voltage For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC
Digital Input Channles 4
Type Source Load
Input Voltage For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC
Digital Output Channels 4 (Sink Type)
Output Voltage Range 8 ~ 35 VDC
Rated Output Current 0.5 A (per channel)
Environment Operating Temperature -10 ~ 60° C (when mounted vertically
Storage Temperature -40 ~ 70°C
Relative Humidity 5 ~ 95% (non-condensing)