S7-300 SM Analog modules

S7-300 Signal modules

More complex tasks require the processing of analog process signals. Analog actuators and sensors can be connected to a SIMATIC S7-300 via analog modules without additional amplifiers. The extensive range of modules allows the most suitable signal module to be selected in each case.

Area of application

Analog input modules facilitate connection of the controller to the analog signals of a process. They are suitable for connecting analog sensors such as voltage and current sensors, thermocouples, resistors and resistance thermometers as well as analog actuators.

Benefits

The use of analog input/output modules provides the user with the following advantages:

Optimum adaptation:
Since almost any combination of modules is possible, the number of inputs/outputs can be matched to suit the task in hand. Superfluous investments no longer exist
High-performance analog technology:
A variety of input/output ranges and high resolution facilitate connection of a multitude of analog sensors and actuators

Design and functions

The use of analog input/output modules provides the user with the following advantages:

Red LED for group faults
Slot for the front connector, protected by the front cover
Labeling area on the front cover

When used in the ET 200M distributed I/O station together with active bus modules, the modules can be hot-swopped during operation without affecting the other modules.

User-friendly wiring

The modules are wired by means of a front connector. When they are first plugged in, a coding element clicks into place so that the connector will only fit into modules of the same type. When the module is replaced, the front connector can be used in its fully wired state for a new module of the same type.

SM 331 Analog Input Modules

6ES7331-1KF02-0AB0

SIMATIC S7-300, Analog input SM 331, Isolated 8 AI, resolution 13 bits U/I/resistor/Pt100, NI100, NI1000, LG-NI1000, PTC/KTY, 66 ms conversion time; 1x 40-pole

6ES7331-7HF01-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, resolution 14 bit, 0.052 ms/channel current, Voltage alarm, diagnostics, 1x 20-pole, suitable for isochronous mode Improved bus cycle time for isochronous mode

6ES7331-7KB02-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 2 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole, Removing/inserting with active backplane bus

6ES7331-7KF02-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus

6ES7331-7NF00-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55ms), Single rooting (50 V COM.), 1x 40-pole

6ES7331-7NF10-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-pole

6ES7331-7PE10-0AB0

SIMATIC S7-300, Analog input SM 331, single channel Isolated 250 V AC, 6 AI thermocouples Type B, E, J, K, L, N, R, S, T Voltage: +/-25MV to +/-1V 16 bit, 50ms, 1x 40-pole

6ES7331-7PF01-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 2/3/4-wire, 8 AI, Resistor, Pt100/200/1000 NI100/120/200/500/1000, CU10, characteristics according to GOST 16 (internal 24) bit, 50ms, 1x 40-pole

6ES7331-7PF11-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit, 50ms, 1x 40-pole

SM 332 Analog Output Modules

6ES7332-5HB01-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 2 AO, U/I; resolution 11/12 bits, 20-pole, Removing/inserting with active backplane bus possible

6ES7332-5HD01-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 4 AI, U/I; diagnostics; resolution 11/12 bits, 20-pole, removing and inserting possible with active backplane bus

6ES7332-5HF00-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 8 AO, U/I; diagnostics; resolution 11/12 bits, 40-pole, removing and inserting possible with active backplane bus

6ES7332-7ND02-0AB0

SIMATIC S7-300, Analog output SM 332, isolated by channel, 4 AI, Resolution 16 bit, 0-10 V, 1-5 V, +/-10 V, +/-20 mA, 0/4-20mA, 20-pole, suitable for isochronous mode improved bus cycle times for the isochronous mode

SM 334 Analog IO

6ES7334-0CE01-0AA0

SIMATIC S7-300, Analog module SM 334, Non-isolated 4 AI/2 AO, 1x 20-pole, Removing and inserting possible with active backplane bus

6ES7334-0KE00-0AB0

SIMATIC S7-300, Analog module SM 334, isolated, 4 AI/2 AO, 12 bit, 0-10 V f. Pt100 (climatic range -120-155 degrees) and 10 kOhm measuring range, 1x 20-pole

Technical data

Services and Support

Leveraging Factory Automation to Improve Processes and Operations

In the manufacturing world, business success depends on your ability to employ your assets in a way that delivers maximum return. But it can be a real challenge to use existing systems to increase output, improve product quality, ensure safety and comply with regulatory requirements.

C&M understands that improving the efficiency of your assets involves more than implementing new technologies. We can help you upgrade or use your existing systems and infrastructure to enhance your plant-centric processes and operations for stronger business performance. From automation controls to complete factory automation and main automation contractor services, C&M has the automation consultants, specialists and control engineers on staff to deliver.

Every project benefits from our deep experience in a variety of industries and technologies. Our proven execution methodology ensures that we implement solutions in a safe, cost-effective and timely manner, meeting or exceeding all your project goals. Our automation solutions are platform-independent, scalable and sustainable, allowing you to continue experiencing benefits as you grow. Enjoy greater efficiency, reliability and predictability on your plant floor with C&M.

C&M’s automation solutions can help you:

Identify suboptimized operations — Conduct studies, audits and long-term assessments to pinpoint bottlenecks and help quantify opportunities for improvement.
Make better decisions — Implement C&M’s industrial automation solutions to coordinate the right process controls with the most critical process information, all so you can make the best decisions for your organization.
Improve plant efficiency, quality and safety — Depend on C&M’s process automation solutions to streamline production, ensure quality control and minimize risk of injury in your facility.
Ensure success for your DCS Conversion — Get the support you need for a smooth DCS migration.
Boost productivity — Look to our process automation services to reduce variability, ensure system reliability and reduce maintenance downtime. Special capabilities include PID tuning, FEED engineering, construction automation, batch automation, optimizing your industrial network systems and more.
Deploy the right solution for your facility — Depend on C&M’s design standards and best-practices expertise to develop the right automation engineering solutions for your needs, with complete documentation.
Ensure regulatory compliance — Implement process validation and validated systems for ensured compliance with industry regulations and best practices.