Services

MITSUBISHI Fx Analog

Analog expansion board (A/D conversion, D/A conversion)

Model
(Number of channels)

Input specifications

Applicable FX PLC

Item

Input voltage

Input current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX3G-2AD-BD
(Input 2 ch)

Input
range

0 to 10 V DC
(Input resistance 198.7 kΩ)

4 to 20 mA DC
(Input resistance 250 Ω)

*3
○
Max.
1 unit

*1*2
○
Max.
2 units

Resolution

2.5 mV
(10 V/4000)

8 μA
{(20 - 4 mA)/2000}

FX3G-1DA-BD
(Output 1 ch)

Output
range

0 to 10 V DC
(External load resistance value
2 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
500 Ω or less)

*3
○
Max.
1 unit

*1*2
○
Max.
2 units

Resolution

2.5 mV
(10 V/4000)

8 μA
{(20 - 4 mA)/2000}

*1: Supported by FX3G ver. 1.10 and later.
*2: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*3: Function expansion board and FX3S-CNV-ADP cannot be used together.

Mixed Analog Input/Output (A/D conversion, D/A conversion)

Model
(Number of channels)

Input/output specifications

Applicable FX PLC

Item

Input/output voltage

Input/output current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX3U-3A-ADP
(Input 2 ch)
(Output 1ch)

Input
range

0 to 10 V DC
(Input resistance
198.7 kΩ)

4 to 20 mA DC
(Input resistance 250 Ω)

*7
○
Max.
1 unit

*1*6
○
Max.
2 units

*2
○
Max.
4 units

○
Max.
2 units

*3
○
Max.
4 units

Output
range

0 to 10 V DC
(External load resistance value
5 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
500 Ω or less)

Resolution

[Input voltage]
2.5 mV (10 V/4000)
[Output voltage]
2.5 mV (10 V/4000)

[Input current]
5 μA (16 mA/3200)
[Onput current]
4 μA (16 mA/4000)

FX2N-5A
(Input 4 ch)
(Output 1ch)

Input
range

-100 to 100 mV DC
-10 to 10 V DC
(Input resistance 200 kΩ)

-20 to 20 mA DC
4 to 20 mA DC
(Input resistance 250 Ω)

○
Max.
8 units

*4*5
○
Max.
8 units

Output
range

-10 to 10 V DC
(External load resistance value
2 kΩ to 1 MΩ)

0 to 20 mA DC,
4 to 20 mA DC
(External load resistance value
500 Ω or less)

Resolution

50 μV
(at ±100 mV)
312.5 μV
(at ±10 V)

1.25 μA，10 μA
((depending on
mode used))

*1: Supported by FX3G ver.1.20 and later. For connection to FX3G, FX3G-CNV-ADP is required.
*2: Supported by FX3U ver.2.61 and later. For connection to FX3U, function expansion board is required.
*3: Supported by FX3UC ver.2.61 and later. When connecting to FX3UC- 32MT-LT(-2), function expansion board is required.
*4: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC- 1PS-5V is required.
*5: FX3UC- 32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC- **MT/DSS, FX3UC-16MR/D (S)-T: 8 units.
*6: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*7: For connection to FX3S, FX3S-CNV-ADP is required.

Analog Input (A/D conversion)

Model
(Number of channels)

Input specifications

Applicable FX PLC

Item

Input voltage

Input current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX3S-30MR/ES-2AD
FX3S-30MT/ES-2AD
FX3S-30MT/ESS-2AD
(Input 2ch)

Input
range

0 to 10 V DC
(Input resistance 115.7 kΩ)

Resolution

10 mV
(10 V/1000)

FX2N-2AD
(Input 2 ch)

Input
range

0 to 10 V DC,
0 to 5 V DC
(Input resistance 200 kΩ)
The input characteristic is the same for each channel.

4 to 20 mA DC
(Input resistance 250 Ω)
The input characteristic is the same for each channel.

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

2.5 mV
(10 V × 1/4000)
1.25 mV
(5 V × 1/4000)

4 μA
((20 - 4 mA) × 1/4000)

FX3U-4AD
(Input 4ch)

Input
range

-10 to 10 V DC
(Input resistance 200 kΩ)

-20 to 20 mA DC,
4 to 20 mA
(Input resistance 250 Ω)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

0.32 mV
(20 V × 1/64000)

1.25 μA
(40 mA × 1/32000)

FX3U-4AD-ADP
(Input 4ch)

Input
range

0 to 10 V DC
(Input resistance 194 kΩ)

4 to 20 mA DC
(Input resistance 250 Ω)

*8
○
Max.
1 unit

*4*3
○
Max.
2 units

*5
○
Max.
4 units

○
Max.
2 units

*5*6
○
Max.
4 units

Resolution

2.5 mV
(10 V/4000)

10 μA
(16 mA/1600)

FX3UC-4AD
(Input 4ch)

Input
range

-10 to 10 V DC
(Input resistance 200 kΩ)

4 to 20 mA DC,
-20 to 20 mA DC
(Input resistance 250 Ω)

*7*2
○
Max.
8 units

Resolution

0.32 mV
(20 V × 1/64000)
2.50 mV
(20 V × 1/8000)

1.25 μA
(40 mA × 1/32000)
5.0 μA
(40 mA × 1/8000)

FX2N-8AD
(Input 8 ch)

Input
range

-10 to 10 V DC
(Input resistance 200 kΩ)

4 to 20 mA DC
-20 to 20 mA DC
(Input resistance 250 Ω)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

0.63 mV
(20 V × 1/32000)
2.50 mV
(20 V × 1/8000)

2.5 μA
(40 mA × 1/16000)
2 μA
(16 mA × 1/8000)
5.0 μA
(40 mA × 1/8000)
4 μA
(16 mA × 1/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC- 1PS-5V is required.
*2: FX3UC- 32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC- **MT/DSS, FX3UC-16MR/D (S)-T: 8 units.
*3: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, function expansion board is required.
*6: FX3UC- 32MT-LT supported from version 1.20 or later.
*7: FX3UC- 32MT-LT supported from version 1.30 or later.
*8: When connecting to FX3S, FX3S-CNV-ADP is required.

Analog Output (D/A conversion)

Model
(Number of channels)

Output specifications

Applicable FX PLC

Item

Output voltage

Output current

FX
3S

FX
3G

FX
3U

FX
3GC

FX
3UC

FX2N-2DA
(Output 2 ch)

Output
range

0 to 10 V DC,
0 to 5 V DC
(External load resistance value
2 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
400 Ω or less)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

2.5 mV
(10 V × 1/4000)
1.25 mV
(5 V × 1/4000)

4 μA
((20 - 4) mA × 1/4000)

FX3U-4DA
(Output 4 ch)

Output
range

-10 to 10 V DC
(External load resistance value
1 kΩ to 1 MΩ)

0 to 20 mA DC
4 to 20 mA DC
(External load resistance value
500 Ωor less)

○
Max.
8 units

*1*2
○
Max.
8 units

Resolution

0.32 mV
(20 V × 1/64000)

0.63 μA
(20 mA × 1/32000)

FX3U-4DA-ADP
(Output 4 ch)

Output
range

0 to 10 V DC
(External load resistance value
5 kΩ to 1 MΩ)

4 to 20 mA DC
(External load resistance value
500 Ω or less)

*7
○
Max.
1 unit

*3*4
○
Max.
2 units

*5
○
Max.
4 units

○
Max.
2 units

*5*6
○
Max.
4 units

Resolution

2.5 mV
(10 V/4000)

4 μA
(16 mA/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC- 1PS-5V is required.
*2: FX3UC- 32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC- **MT/DSS, FX3UC-16MR/D (S)-T: 8 units.
*3: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, FX3UC-32MT-LT(-2), function expansion board is required.
*6: FX3UC- 32MT-LT supported from version 1.20 or later.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.

MITSUBISHI Fx Communication

Fx Communication

High-speed output special adapter

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-2HSY-ADP	Independent two axes	200kHz	×	×	* ○ Max. 2 units	×	×

*: When used together with analog or communication adapters, function expansion board is required

Pulse output block

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-1PG	Independent one axis	200kHz	×	×	*3 ○ Max. 8 units	×	13 ○ Max. 6 units
	FX2N-10PG	Independent one axis	1MHz(1 Hz to 1 MHz differential line driver output)	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.
*3: FX3U, FX3UC supported from version 2.20 or later.

SSCNET

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX3U-20SSC-H	Ｔwo axes (Independent/Simultaneous)	-	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

Positioning dedicated unit

Model		Number of controlled axis	Maximum requency	Applicable FX PLC
Model		Number of controlled axis	Maximum requency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX2N-10GM	Independent one axis	200kHz	×	×	○ Max. 8 units	×	12 ○ Max. 8 units
	FX2N-20GM	Two axes (Independent/Simultaneous)	200kHz	×	×	○ Max. 8 units	×	12 ○ Max. 8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units

For FX2N-10GM/FX2N-20GM positioning teaching panel

Model	Product
E-20TP-SET0 (with E-20TP-CAB0)	FX2N-10GM, FX2N-20GM
E-20TP-E-SET0 (with E-20TP-CAB0)	FX2N-10GM, FX2N-20GM

Angle control unit

Model		Number of controlled axis	Maximum frequency	Applicable FX PLC
Model		Number of controlled axis	Maximum frequency	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
	FX2N-1RM-SET*1	One axis	720 divisions/rotation (0.5 degree) or 360 divisions/rotation (1 degree)	×	×	○ Max. 3 units	×	23 ○ Max. 3 units
	FX2N-1RM-E-SET*1	One axis		×	×	○ Max. 3 units	×	23 ○ Max. 3 units

*1: FX2N-1RM-SET is a Japanese domestic only product. For use overseas, please select FX2N-1RM-E-SET, which supports overseas standards.
*2: Extension cable cannot be used.
*3: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

PLC built-in pulse output functions and positioning functions

Items		FX3S	FX3G，FX3GC	FX3U，FX3UC
Number of axis		Two axes	[FX3G] 　Two axes (14/24 points) 　Three axes (40/60 points) [FX3GC] 　Two axes	Three axes
Number of controlled axis		Independent two axes	[FX3G] 　Independent two axes (14/24 points) 　Independent three axes (40/60 points) [FX3GC] 　Independent two axes	Independent three axes
Maximum frequency		100 kHz	100 kHz	100 kHz
Programming languages		Sequence programs	Sequence programs	Sequence programs
Compatible main unit		Transistor output type main unit	Transistor output type main unit	Transistor output type main unit
Pulse output instruction	Pulse Y Output (PLSY)	○	○	○
	Acceleration/Deceleration Setup Pulse Y Output (PLSR)	○	○	○
	Pulse output type	Pulse train (Direction is controlled by PLC program)	Pulse train (Direction is controlled by PLC program)	Pulse train (Direction is controlled by PLC program)
Positioning instruction	Absolute Current Value Read ([D]ABS)	○	○	○
	Dog Search Zero Return (DSZR)	○	○	○
	Zero Return (ZRN)	○*1	○*1	○*1
	Variable Speed Pulse Output (PLSV)	○	○	○
	Drive to Increment (DRVI)	○	○	○
	Drive to Absolute (DRVA)	○	○	○
	Interrupt Positioning (DVIT)	×	×	○
	Batch Data Positioning Mode ([D]TBL)	×	○	○*2
	Pulse output type	Pulse train + direction	Pulse train + direction	Pulse train + direction

*1: No DOG search function Decelerate when near point DOG turns ON, and stop when near point DOG turns OFF (Different from zero return operation with zero signal count)
*2: FX3UC-32MT-LT supported from version 2.20 or later.

Optional parts and spare parts

Servo motor connection cable

Model		Length	Description
	E-GMH-200CAB	2 m	[MR-H series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block.
	E-GMJ-200CAB	2 m	[MR-J series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block.
	E-GMJ2-200CAB1A	2 m	[MR-J2, MR-J2-Super series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
	E-GMC-200CAB	2 m	[MR-C series servo amplifer connection cable] Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block.
	E-GM-200CAB	2 m	[General purpose connection cable] Has connector on both sides. Can connect to general purpose drive unit via Mitsubishi terminal block.

Connector for self-manufactured I/O cable (an electric wire or a crimp tool is not enclosed.)

Model		Description
	FX2C-I/O-CON	[Flat Cable Connector] AWG28 (0.1 mm²): A set of 10 pcs Crimp connector: FRC2-A020-3OS 1.27-pitch 20 cores Crimp tool: Separately arrange the tool manufactured by DDK Ltd. 357J-4674D Main Unit 357J-4664N Attachment
	FX2C-I/O-CON-S	[Connector for bared wire] AWG22 (0.3 mm²): 5 sets Housing: HU-200S2-001 Crimp contact: HU-411S Crimp tool: A product manufactured by DDK Ltd. is separately required. 357J-5538
	FX2C-I/O-CON-SA	[Connector for bared wire] AWG20 (0.5mm²): 5 sets Housing: HU-200S2-001 Crimp contact: HU-411SA Crimp tool: A product manufactured by DDK Ltd. is separately required. 357J-13963

Extension connection cable

Model		Length	Description
	FX2N-GM-65EC	65 cm	[Connection extension cable between PLC and FX2N-10GM/FX2N-20GM] One cable cable can be used in a system. Standard connection cable (55mm) is included with FX2N-10GM/FX2N-20GM.
F2-RS-5CAB		5 m	[Resolver extension cable for FX2N-1RM] Resolver can be extended up to 100m extension by linking multiple cables.

Connection cable for peripheral devices

Model		Length	Description
	(1) E-20TP-CAB0	3 m	[E-20TP connection cable] FX2N-10GM/FX2N-20GM (MINI DIN 8-pin) ⇔ E-20TP (MINI DIN 8-pin) Cable length is different between (1) and (2). (1) E-20TP-CAB0 (3 m) is included with E-20TP-SET0.
	(2) FX-20P-CAB0	1.5 m

Spare parts

Model	Length	Description
FX2N-GM-5EC	55 mm	[Connection cable between PLC and FX2N-10GM/20GM] One cable is included with FX2N-10GM/20GM.

MITSUBISHI Q Digital module

Input modules, Interrupt module

Point	DC input					DC/AC input	AC input
	5 V DC		5/12 V DC	24 V DC		48 V DC/AC	100...120 V AC	100...120 V AC
	Positive	Negative	Positive/ Negative	Positive	Negative	Positive/ Negative	100...120 V AC	100...120 V AC
8 points	—	—	—	QX48Y57^*1	—	—	—	QX28
16 points	QX70H	QX90H	QX70	QX40 QX40-TS QX40-S1 QX40H QI60	QX80 QX80H QX80-TS	QX50	QX10 QX10-TS	—
32 points	—	—	QX71	QX41 QX41-S1 QX41-S2 QH42P^1 QX41Y41P^1	QX81 QX81-S2	—	—	—
64 points	—	—	QX72	QX42 QX42-S1	QX82 QX82-S1	—	—	—

*1: Input specifications for I/O combined modules

Output modules

Point	Contact output	TRIAC output	Transistor output
	24 V DC, 240 V AC	100...240 V AC	5...12 V DC	5...24 V DC		12...24 V DC
	24 V DC, 240 V AC	100...240 V AC	Sink type	Sink type	Sink/Source type	Sink type	Source type
7 points	—	—	—	—	—	QX48Y57^*2	—
8 points	QY18A	—	—	—	QY68A	—	—
16 points	QY10 QY10-TS	QY22	QY70	—	—	QY40P QY40P-TS QY50	QY80 QY80-TS
32 points	—	—	QY71	QY41H	—	QY41P QH42P^2 QX41Y41P^2	QY81P
64 points	—	—	—	—	—	QY42P	QY82P

*2: Output specifications for I/O combined modules

●High speed DC input module (positive common type) QX40H QX70H

●High speed DC input module (negative common type) QX80H QX90H

Speed up control by catching the input signal variation at 0 ms^*3.
Two devices with differing power systems can be connected to the same module using different 8 point common terminals.

*3: The actual response time is 5 µs delay when turning ON, 10 µs delay when turning OFF, because the hardware response time is added.

Common type	Input voltage
Common type	24 V DC	5 V DC
Positive	QX40H	QX70H
Negative	QX80H	QX90H

●Spring clamp terminal block type input module QX10-TS QX40-TS QX80-TS

●Spring clamp terminal block type output module QY10-TS QY40P-TS QY80-TS

Spring clamp terminal blocks visually indicate the connection status. Also, by eliminating screws, wiring and maintenance work is made easier.

Advantages of spring clamp terminal blocks

Advantages of spring clamp terminal blocks

Impervious to vibration, secured wiring connections.
Eliminating screws greatly simplifies conventional maintenance.

MITSUBISHI Q Cpu

Universal Model QCPU

Lineup

Model	Program capacity	Device capacity (Standard device +Standard RAM)	Standard ROM capacity	No. of I/O points	Basic operation processing speed (LD instruction)	Peripheral connection ports^*1	Memory card I/F
Q26UDVCPU	260K steps	700K words (60K+640K)	4102K bytes	4096 points	1.9ns		(SD memory card, SDHC memory card) ^*2
Q13UDVCPU	130K steps	572K words (60K+512K)	2051K bytes
Q06UDVCPU	60K steps	424K words (40K+384K)	1025.5K bytes
Q04UDVCPU	40K steps	168K words (40K+128K)
Q03UDVCPU	30K steps	126K words (30K+96K)
Q100UDEHCPU	1000K steps	925K words (29K+896K)	16384K bytes		9.5ns		(SRAM card, FLASH card, ATA card)
Q50UDEHCPU	500K steps	797K words (29K+768K)	8092K bytes
Q26UDEHCPU	260K steps	669K words (29K+640K)	4096K bytes
Q26UDHCPU	260K steps
Q20UDEHCPU	200K steps
Q20UDHCPU	200K steps
Q13UDEHCPU	130K steps	541K words (29K+512K)	2048K bytes
Q13UDHCPU	130K steps
Q10UDEHCPU	100K steps
Q10UDHCPU	100K steps
Q06UDEHCPU	60K steps	413K words (29K+384K)	1024K bytes
Q06UDHCPU	60K steps	413K words (29K+384K)
Q04UDEHCPU	40K steps	157K words (29K+128K)
Q04UDHCPU	40K steps	157K words (29K+128K)
Q03UDECPU	30K steps	125K words (29K+96K)			20ns
Q03UDCPU	30K steps	125K words (29K+96K)			20ns
Q02UCPU	20K steps	93K words (29K+64K)	512K bytes	2048 points	40ns
Q01UCPU	15K steps			1024 points	60ns		—
Q00UCPU	10K steps			1024 points	80ns
Q00UJCPU	10K steps	29K words	256K bytes	256 points	120ns

*1: The USB port terminal is mini-B.
*2: The operation of devices that are not manufactured or recommended as compatible products by Mitsubishi Electric cannot be guaranteed.

MITSUBISHI Q Analog module

Analog I/O

A wide range of application specific intelligent modules

A range of analog modules ideal for process control applications.

Isolated analog modules suitable for process control

index 04

●Channel isolated high resolution analog-digital converter module
Q64AD-GH

●Channel isolated high resolution analog-digital converter module (with signal conditioning function)
Q62AD-DGH

●Channel isolated high resolution digital-analog converter module
Q62DA-FG

●Channel isolated analog-digital converter module
Q68AD-G

●Channel isolated analog-digital converter module (with signal conditioning function)
Q66AD-DG

●Channel isolated digital-analog converter module
Q66DA-G

The channel isolated analog modules are specifically designed for process control applications by offering high accuracy conversion combined with high isolation voltage. Flow meters, pressure gauges, etc. can be directly connected to the analog input, and control valves to the analog output. Hardware and installation costs can be substantially reduced because external isolation amplifiers are not required.

When used with a general purpose controller, a low cost process control solution can be created.

High dielectric withstand voltage

High conversion speed analog modules

System configuration example

●High speed analog-digital converter module
Q64ADH

●Analog-digital converter module
Q68ADV
Q68ADI

●Analog-digital converter module
Q64DAH

●Digital-analog converter module
Q62DAN
Q64DAN
Q68DAVN
Q68DAIN

●Analog-digital/Digital-analog converter module
Q64AD2DA

Many high-speed A/D and D/A conversion (analog) modules are available.

These modules are feature packed to allow maximum flexibility when connecting to devices. Both speed and accuracy are great enough to control sensitive motion applications using servos or inverters.

Lineup

Number of channels	Channel isolated	Analog input			Analog output
Number of channels	Channel isolated	Voltage input	Current input	Signal conditioning	Voltage output	Current output
2	●	—	—	Q62AD-DGH	Q62DA-FG
2	—	—	—	—	Q62DAN Q64AD2DA
4	●	Q64AD-GH		—	—	—
4	—	Q64AD Q64ADH Q64AD2DA		—	Q64DAN Q64DAH
6	●	—	—	Q66AD-DG	Q66DA-G
8	●	Q68AD-G		—	—	—
8	—	Q68ADV	Q68ADI	—	Q68DAVN	Q68DAIN

Address

Call us on

Mail us @

Analog expansion board (A/D conversion, D/A conversion)

Mixed Analog Input/Output (A/D conversion, D/A conversion)

Analog Input (A/D conversion)

Analog Output (D/A conversion)

Fx Communication

High-speed output special adapter

Pulse output block

SSCNET

Positioning dedicated unit

For FX2N-10GM/FX2N-20GM positioning teaching panel

Angle control unit

PLC built-in pulse output functions and positioning functions

Optional parts and spare parts

Servo motor connection cable

Connector for self-manufactured I/O cable (an electric wire or a crimp tool is not enclosed.)

Extension connection cable

Connection cable for peripheral devices

Spare parts

Input modules, Interrupt module

Output modules

Universal Model QCPU

Lineup

Analog I/O

Isolated analog modules suitable for process control

High conversion speed analog modules

Lineup

More Articles ...

Services and Support

Leveraging Factory Automation to Improve Processes and Operations