Services

EKI-7626CI

16+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch
		Main Features Provides 2 Gigabit Copper/SFP combo port plus 16 Fast Ethernet ports SFP socket for Easy and Flexible Fiber Expansion Supports Auto Negotiation and Auto MDI/MDI-X Supports 4,000 VDC Ethernet ESD protection Supports 3,000 VDC surge (EFT) protection for power line Provides flexible mounting: DIN-rail, Wall Mounting Supports Dual 12 ~ 48 VDC power input and 1 relay output Supports wide operating temperatures from -40 ~ 75° C

Introduction
Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7626C comes equipped with 16 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7626C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7626C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7626C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.
Specifications
Part Number		EKI-7626CI-AE
General	Ethernet Connectors	16 x RJ-45 + 2 RJ-45/SFP (mini-GBIC) combo ports
	Mounting	DIN-rail, Wall
I/O	Transmission Distance	Ethernet: Up to 100 m (4-wire Cat.5e, Cat.6 RJ-45 cable suggested for Gigabit port) Gigabit Fiber: Up to 110 km (depending on SFP)
	Transmission Speed	Ethernet: 10/100Mbps Auto-Negotiation Gigabit Copper: 10/100/1000 Mbps, Auto-Negotiation Gigabit Fiber: Up to 1000Mbps
Operating System	Operating Temperature	-40 ~ 75°C (-40 ~ 167°F)
Power Supply	Power Connector	6-pin removable screw terminal
	Power Input	2 x Unregulated 12 ~ 48 VDC

EKI-7629C

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch
		Main Features Provides 2 Gigabit Copper/SFP combo port plus 8 Fast Ethernet ports SFP socket for Easy and Flexible Fiber Expansion Supports Auto Negotiation and Auto MDI/MDI-X Supports 4,000 VDC Ethernet ESD protection Supports 3,000 VDC surge (EFT) protection for power line Provides flexible mounting: DIN-rail, Wall Mounting Supports Dual 12 ~ 48 VDC power input and 1 relay output

Introduction
Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7629C comes equipped with 8 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7629C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7629C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7629C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.
Specifications
Part Number		EKI-7629C-AE
Expansion Supported	32-bit PCI	5
	PCIex16	1
	PCIex4	1
General	Certifications	CE, FCC, UL/cUL 60950-1
	Ethernet Connectors	8 x RJ45 + 2 x RJ-45/SFP combo ports
	Mounting	DIN-rail, Wall
I/O	COM	2 x RS-232
	Transmission Distance	Ethernet up to 100 m, Fiber up to 110 km
	Transmission Speed	10/100/1000Mbps
	USB	8 (2.0)
Memory	(Max)	4GB DDR2
Network	LAN	GbE
Operating System	Operating Temperature	-10 ~ 60°C (14 ~ 140°F)
Power Supply	Power Connector	6-pin removable screw terminal
Power Supply	Power Input	2 x Unregulated 12 ~ 48 VDC
Processor	Chipset	Intel® 945G
	CPU Type	Core™ Duo
	Max Speed	3.4GHz

ADAM-6520

5-port Industrial 10/100 Mbps Ethernet Switch
		Main Features Supports full/half duplex flow control Supports MDI/MDI-X auto crossover Provides broadcast storm protection Embedded with a switch controller, supports auto-negotiation Supports +10 ~ 30 VDC voltage power input Provides surge (EFT) protection 3000VDC for power line (ADAM-6520L not equipped) Supports 4,000 VDC Ethernet ESD protection (ADAM-6520L not equipped) Provides flexible mounting: DIN-rail, Wall, Stack Supports wide operating temperature range : -40 ~ 85° C (ADAM-6520)

Introduction
ADAM-6520 is a 5-port industrial-grade switch with Ethernet connectivity and from 10 to 100 Mbps transfer rates(Auto-negotiation). Just like any other product in the ADAM family, ADAM-6520 can be mounted in three different ways: DIN rail, Wall and Stack. Solid industrial-grade design assures reliable operation in common application areas like: semi-conductor factories, inventory control environments, assembly lines, manufacturing and many more. All modules support a wide voltage range of +10 ~ 30 VDC over the terminal block, and 3,000 VDC surge (EFT) protection ensures that over-voltage is no concern. The wide operating temperature of ADAM-6520 goes from -10 ~ 70°, while ADAM-6520I from -40 ~ 85°. This permits them to be functional in harsh environments. The six inclusive LED indicators make troubleshooting of the modules easier. Each port has a pair of LEDs that indicate link status and port activities. This easily informs users of any collisions, the link status, power failure and data receipts for immediate on-site diagnosis.
Specifications
Part Number		ADAM-6520-BE
General	Ethernet Connectors	5 x RJ-45
	Mounting	DIN 35 rail, Wall, Stack
I/O	Transmission Distance	Ethernet up to 100 m
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	-10 ~ 70°C (14 ~ 158°F) I21 Stack: -10~ 60°C (-40 ~ 140°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC

EKI-7629CI

8+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch w/ Wide Temp
		Main Features SFP socket for Easy and Flexible Fiber Expansion Supports Auto Negotiation and Auto MDI/MDI-X Supports 4,000 VDC Ethernet ESD protection Supports 3,000 VDC surge (EFT) protection for power line Provides flexible mounting: DIN-rail, Wall Mounting Supports Dual 12 ~ 48 VDC power input and 1 relay output Supports wide operating temperatures from -40 ~ 75° C

Introduction
Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7626C comes equipped with 16 x 10/100Base-T(X) fast Ethernet ports and the EKI-7629C comes equipped with 8 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance (< 100 m), or the appropriate replaceable SFP module can be used for the application of wideband uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Between Failures) ensures that the EKI-7626C/7629C will continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7626C/7629C includes a switch controller that can automatically sense transmission speeds (10/100Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can betransmitted properly. Furthermore, the power line of EKI-7626C/7629C supports up to 3,000 VDC surge (EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.
Specifications
Part Number		EKI-7629CI-AE
General	Certifications	CE, FCC, UL/cUL 60950-1
	Ethernet Connectors	8 x RJ45 + 2 x RJ-45/SFP combo ports
	Mounting	DIN-rail, Wall
I/O	Transmission Distance	Ethernet up to 100 m, Fiber up to 110 km
	Transmission Speed	10/100/1000Mbps
Operating System	Operating Temperature	-40 ~ 75°C (-40 ~ 167°F)
Power Supply	Power Connector	6-pin removable screw terminal
	Power Input	2 x Unregulated 12 ~ 48 VDC

ADAM-6520I

5-port Industrial 10/100 Mbps Ethernet Switch w/ Wide Operating Temperature
		Main Features Supports full/half duplex flow control Supports MDI/MDI-X auto crossover Provides broadcast storm protection Embedded with a switch controller, supports auto-negotiation Supports +10~30 VDC for power input Provides surge protection 3,000 VDC for power line Supports 4,000 VDC Ethernet ESD protection Provides flexible mounting: DIN-rail, Wall, Stack Supports wide operating temperature range: -40 ~ 85° C

Introduction
ADAM-6520I is a 5-port industrial-grade switch with Ethernet connectivity and 10/100 Mbps transmission speed. Just like any other in the ADAM® family, ADAM-6520I can be mounted in three different ways: DIN-rail, wall and stack. ADAM-6520I supports wider operating temperature ranges from -40°C up to 85°C while the ADAM-6520 from -10~70°C.
Specifications
Part Number		ADAM-6520I-AE
General	Ethernet Connectors	5 x RJ-45
	Mounting	DIN 35 rail, Wall, Stack
I/O	Transmission Distance	Ethernet up to 100 m
	Transmission Speed	UP to 100 Mbps
Operating System	Operating Temperature	-40 ~ 85°C (-40 ~ 185°F) Stack: -40~ 75°C (-40 ~ 167°F)
Power Supply	Power Connector	2-pin removable screw terminal
	Power Input	1 x Unregulated 10 ~ 30 VDC