• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

Energy Data Concentrators

Advantech's Energy Data Concentrator supports serial communication ports and several networking interfaces. Pre-installed with Advantech's WinCE WebAccess management software, the BEMG-4110 and BEMG-4220 are browser-controlled Energy Data Concentrators, whose Web Server function increases flexibility and convenience, making it easy to configure and maintain the system via the Internet. With a built-in driver, the BEMG-4110/4220 can connect to and collect data from a wide variety of automation equipment and devices.

Product
Model Number Description
  Energy Data Concentrator with 4 x COM, 1 x LAN
 
  Energy Data Concentrator with 4 x COM, 2 x LAN

 

 

Ethernet I/O Modules: ADAM-6000

In the past, integrating automation and enterprise systems required changing the entire architecture of the control system. Nowadays, Advantech ADAM-6000 accomplishes this integration easily through the latest internet technology, so that it can remotely monitor the device status more flexibly. Advantech's ADAM-6000 modules are empowered by Peer-to-Peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. With Advantech's P2P and GCL technology, no additional controllers or programming is needed. With the easy-to-use and intuitive graphic utility, system configurations can be done in an extremely short time. The members of ADAM-6000 series include Communication Controllers, Analog Input/Output Modules and Digital Input/Output Modules.

Product Catagories

Advantech Analog I/O Modules

The analog input modules use microprocessor-controlled, high resolution, 16-bit, sigma-delta A/D converters to acquire sensor signals such as voltage, current, thermocouple or RTD.

Digital I/O Modules

The digital input/output channels provide three operational modes, with each channel able to set its operational mode independently. The counter/frequency module offers two 32-bit counter channels and a built-in programmable timer for frequency measurement. The relay module offers six isolated digital input channels and six isolated relay channels.

EtherNet/IP Modules

Advantech's ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Equipped with the EtherNet/IP protocol, ADAM-6100EI series also allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chains also provide a more scalable system and using fewer wire s helps avoid interference common in factory settings. Their isolated design prevents the ADAM-6100 series from breaking down and helps resist harmful field interference.

 

 

ADAM-6051

14-ch Isolated Digital I/O Modbus TCP Module with 2-ch Counter


Main Features

  • Provide default/customized web page
  • 10/100 Mbps communication rate
  • 5 KHz counter
  • I/O type: 12 DI / 2DO / 2 Counter
 
Introduction


The ADAM-6051 provides 12 digital inputs, 2 digital outputs, and 2 counters with 2000VRMS isolation protection. This mixed-function module built-in Ethernet port and web page.

Specifications
Part Number ADAM-6051-BE
Analog Input Channels -
Voltage<br>
Input
-
Analog Output Channels -
Voltage<br>
Output
-
Digital I/O Digital Input
Channels
12
Digital Output
Channels
2 (Sink)
General GCL1 Yes
Interface 10/100 Mbps Ethernet
Peer-to-Peer1 Yes

 

ADAM-6050

18-ch Isolated Digital I/O Modbus TCP Module


Main Features

  • Provide default/customized web page
  • Support Dry/Wet contact
  • 10/100 Mbps communication rate
  • I/O Type: 12 DI & 6 DO
 
Introduction


The ADAM-6050 is a high-density I/O module built-in a 10/100 based-T interface for seamless Ethernet connectivity. It provides 12 digital input and 6 digital output channels with 2000VRMS Isolating protection.

Specifications
Part Number ADAM-6050-BE
Analog Input Channels -
Voltage<br>
Input
-
Analog Output Channels -
Voltage<br>
Output
-
Digital I/O Digital Input
Channels
12
Digital Output
Channels
6 (Sink)
General GCL1 Yes
Interface 10/100 Mbps Ethernet
Peer-to-Peer1 Yes

 

ADAM-6052

16-ch Source-type Isolated Digital I/O Modbus TCP Module


Main Features

  • 8 Channel
  • 8 DI/8 DO
  • VDC: 35 V
  • Optical Isolation: 2000 Vrms
 
Introduction


16-channel Source Type Digital I/O Module

Specifications
Part Number ADAM-6052-BE
Analog Input Channels -
Voltage<br>
Input
-
Analog Output Channels -
Voltage<br>
Output
-
Digital I/O Digital Input
Channels
8
Digital Output
Channels
8 (Source)
General GCL1 Yes
Interface 10/100 Mbps Ethernet
Peer-to-Peer1 Yes

 

Services and Support

Leveraging Factory Automation to Improve Processes and Operations

In the manufacturing world, business success depends on your ability to employ your assets in a way that delivers maximum return. But it can be a real challenge to use existing systems to increase output, improve product quality, ensure safety and comply with regulatory requirements.

C&M understands that improving the efficiency of your assets involves more than implementing new technologies. We can help you upgrade or use your existing systems and infrastructure to enhance your plant-centric processes and operations for stronger business performance. From automation controls to complete factory automation and main automation contractor services, C&M has the automation consultants, specialists and control engineers on staff to deliver.

Every project benefits from our deep experience in a variety of industries and technologies. Our proven execution methodology ensures that we implement solutions in a safe, cost-effective and timely manner, meeting or exceeding all your project goals. Our automation solutions are platform-independent, scalable and sustainable, allowing you to continue experiencing benefits as you grow. Enjoy greater efficiency, reliability and predictability on your plant floor with C&M.

C&M’s automation solutions can help you:

  • Identify suboptimized operations — Conduct studies, audits and long-term assessments to pinpoint bottlenecks and help quantify opportunities for improvement.
  • Make better decisions — Implement C&M’s industrial automation solutions to coordinate the right process controls with the most critical process information, all so you can make the best decisions for your organization.
  • Improve plant efficiency, quality and safety — Depend on C&M’s process automation solutions to streamline production, ensure quality control and minimize risk of injury in your facility.
  • Ensure success for your DCS Conversion — Get the support you need for a smooth DCS migration.
  • Boost productivity — Look to our process automation services to reduce variability, ensure system reliability and reduce maintenance downtime. Special capabilities include PID tuning, FEED engineering, construction automation, batch automation, optimizing your industrial network systems and more.
  • Deploy the right solution for your facility — Depend on C&M’s design standards and best-practices expertise to develop the right automation engineering solutions for your needs, with complete documentation.
  • Ensure regulatory compliance — Implement process validation and validated systems for ensured compliance with industry regulations and best practices.

 

 

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your machine or plant. 

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.