• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

EKI-4524RI

24+2 SFP Port Unmanaged Industrial Ethernet Switch with Wide Temperature


Main Features

  • Backplane (Switching Fabric): 4.8 Gbps
  • Provides 8K MAC address
  • Supports 100 ~ 240 VAC/ VDC power input and power relay alarm
  • Front panel LEDs simplify the monitoring and management
  • Rear-end wiring with LED indicator
  • Designed to be IEC-61850-3 compliant
  • Wide operating temperature -40 ~ 75° C
  • 1U 19" rack mount design
 
Introduction

EKI-4524I/4524RI is designed to be compliant with the IEC61850-3 certification for power automation systems and supports 24 Fast Ethernet ports and 2 x 100Base-TX SFP slots for different SFP modules in any application. EKI-4524I/4524RI has wide range voltage power input which provides convenient and uninterrupted power supply. EKI-4524RI has two sides (Front and Rear) LED indicator to show the link status conveniently. It also provides relay output for an event alarm. Quick notification and fast response time can shorten service procedures and reduce data loss in the field.
Specifications
Part Number EKI-4524RI-AE
General Ethernet Connectors 24 x RJ-45 (Ethernet)2 x SFP (mini-GBIC) ports
Mounting 1U 19" Rack mount
I/O Transmission Distance Ethernet: Up to 100m (4- wire Cat.5e), SFP: Up to 30 km (depends on SFP)
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature -40 ~ 85°C (-40 ~ 185°F)
Power Supply Power Connector -
Power Input 12 ~ 48 VDC, 100 ~ 240 VAC 50/60 Hz

 

 

EKI-7526I

16-port Unmanaged Industrial Ethernet Switch with Wide Temperature


Main Features

  • Provides 16 10/100Mbps Ethernet ports with RJ-45 connector
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperature (-40~75° C)
 
Introduction

EKI-7526I and EKI-7526MI are cost effective Unmanaged industrial Ethernet switches which support 16 x 10/100Base-TX fast Ethernet ports. The long MTBF (Mean Time Between Failures) ensures low operation and maintenance costs. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. Both EKI-7526MI and EKI-7526I support advanced network standards to optimize network performance, reduce maintenance costs, and secure network safety.
Specifications
Part Number EKI-7526I-AE
General Ethernet Connectors 16 x RJ-45 (Ethernet)
Mounting DIN-rail, Wall
I/O Transmission Distance Ethernet: Up to 100m (4- wire Cat.5e)
Transmission Speed Ethernet:10/100Mbps Auto-Negotiation
Operating System Operating Temperature -40 ~ 75°C (-40 ~ 167°F)
Power Supply Power Input 12 ~ 48 VDC, 100 ~ 240 VAC 50/60 Hz

 

 

EKI-7529MI

8+2 Multi-mode Fiber Optic Industrial Unmanaged Ethernet Switch with Wide Temperature


Main Features

  • Provides SC or ST type fiber optic ports plus 8 Fast Ethernet ports
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Provides flexible mounting: DIN-rail or wallmounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Enable or disable broadcast storm protection through a simple dip switch
  • Supports wide operating temperatures (-40 ~ 75° C)
 
Introduction

Aside from 2 SC or ST type ports, the EKI-7529MI or EKI-7529MI/ST come equipped with 8 x 10/100Base-TX fast Ethernet ports. Traditional SC or ST fiber optic ports can be used for uplinking and long distance transmissions to flexibly fit field requests. The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. Furthermore, the power line of EKI-7529MI or EKI-7529MI/ST supports Surge and EFT protection which secure equipment against unregulated voltage and make systems safer and more reliable.
Specifications
Part Number EKI-7529MI/ST-AE
General Certifications CE, FCC, UL 508
Ethernet Connectors 8 x RJ-45 (Ethernet) with 2 x SC or ST-type fiber optic connectors
Mounting DIN-rail, Wall
I/O Transmission Distance Ethernet up to 100 m, Fiber up to 2 km
Transmission Speed 10/100Mbps
Operating System Operating Temperature -40 ~ 75°C (-40 ~ 167°F)
Power Supply Power Connector 6-pin removable screw terminal (Power & Relay)
Power Input 12 ~ 48 VDC, redundant dual inputs

 

 

EKI-7526MI

16+2 SC Type Fiber Optic Unmanaged Industrial Ethernet Switch with Wide Temperature


Main Features

  • Provides 16 10/100Mbps Ethernet ports with RJ-45 connector
  • Provides SC fiber optic ports plus 16 Fast Ethernet ports
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
  • Supports wide operating temperature (-40~75° C)
 
Introduction

EKI-7526I and EKI-7526MI are cost effective Unmanaged industrial Ethernet switches which support 16 x 10/100Base-TX fast Ethernet ports. Traditional fiber optic ports can be used for up-linking and long distance transmissions to flexibly fit the field requests. The long MTBF (Mean Time Between Failures) ensures low operation and maintenance costs. All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. Both EKI-7526MI and EKI-7526I support advanced network standards to optimize network performance, reduce maintenance costs, and secure network safety.
Specifications
Part Number EKI-7526MI-AE
General Ethernet Connectors 16 x RJ-45 (Ethernet) with 2 x SC type fiber optic
Mounting DIN-rail, Wall
I/O Transmission Distance Ethernet: Up to 100m (4- wire Cat.5e), SFP: Up to 30 km (depends on SFP)
Transmission Speed Ethernet:10/100Mbps Auto-Negotiation
Operating System Operating Temperature -40 ~ 75°C (-40 ~ 167°F)
Power Supply Power Input 12 ~ 48 VDC, redundant dual inputs

 

 

EKI-7626C

16+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch


Main Features

  • Provides 2 Gigabit Copper/SFP combo port plus 16 Fast Ethernet ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports 4,000 VDC Ethernet ESD protection
  • Supports 3,000 VDC surge (EFT) protection for power line
  • Provides flexible mounting: DIN-rail, Wall Mounting
  • Supports Dual 12 ~ 48 VDC power input and 1 relay output
 
Introduction

Aside from 2 Gigabit fiber optic/copper combo ports, the EKI-7626C comes equipped with 16 x 10/100Base-TX fast Ethernet ports. Traditional RJ-45 ports can be used for uplinking wide-band paths in short distance(< 100m), or the appropriate replaceable SFP module can be used for the application of wide band uploading and long distance transmissions to fit the field request flexibly. Also, the long MTBF (Mean Time Betwen Failures) ensures that the EKI-7626C wii continue to operate until a Gigabit network infrastructure has been established, without requiring any extra upgrade costs. EKI-7626C includes a switch controller that can automatically sense transmission speeds (10/100 Mbps) The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically selected and a cross-over cable is not required. All Ethernet ports have memory buffers that support the store-and -forward mechanism, which assures that data can be transmitted properly. Furthemore, the power line of EKI-7626C supports up to 3,000 VDC surge(EFT) protection, which secure equipment against unregulated voltage and make systems safer and more reliable.
Specifications
Part Number EKI-7626C-AE
General Certifications CE, FCC, UL/cUL 60950-1
Ethernet Connectors 16 x RJ-45 + 2 x RJ-45/SFP combo ports
Mounting DIN-rail, Wall
I/O Transmission Distance Ethernet up to 100 m, Fiber up to 110 km
Transmission Speed 10/100/1000Mbps
Operating System Operating Temperature -10 ~ 60°C (14 ~ 140°F)
Power Supply Power Connector 6-pin removable 
screw terminal
Power Input 2 x Unregulated 
12 ~ 48 VDC

 

 

More Articles ...

  1. EKI-7626CI
  2. EKI-7629C
  3. EKI-7629CI
  4. ADAM-6520
Page 63 of 156

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

Latest projects

  • 1

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2
› ‹