• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

Energy Data Concentrators

Advantech's Energy Data Concentrator supports serial communication ports and several networking interfaces. Pre-installed with Advantech's WinCE WebAccess management software, the BEMG-4110 and BEMG-4220 are browser-controlled Energy Data Concentrators, whose Web Server function increases flexibility and convenience, making it easy to configure and maintain the system via the Internet. With a built-in driver, the BEMG-4110/4220 can connect to and collect data from a wide variety of automation equipment and devices.

Product
Model Number Description
BEMG-4110   Energy Data Concentrator with 4 x COM, 1 x LAN
 
BEMG-4220   Energy Data Concentrator with 4 x COM, 2 x LAN

 

 

Ethernet I/O Modules: ADAM-6000

In the past, integrating automation and enterprise systems required changing the entire architecture of the control system. Nowadays, Advantech ADAM-6000 accomplishes this integration easily through the latest internet technology, so that it can remotely monitor the device status more flexibly. Advantech's ADAM-6000 modules are empowered by Peer-to-Peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. With Advantech's P2P and GCL technology, no additional controllers or programming is needed. With the easy-to-use and intuitive graphic utility, system configurations can be done in an extremely short time. The members of ADAM-6000 series include Communication Controllers, Analog Input/Output Modules and Digital Input/Output Modules.

Product Catagories

Advantech Analog I/O Modules

The analog input modules use microprocessor-controlled, high resolution, 16-bit, sigma-delta A/D converters to acquire sensor signals such as voltage, current, thermocouple or RTD.

Digital I/O Modules

The digital input/output channels provide three operational modes, with each channel able to set its operational mode independently. The counter/frequency module offers two 32-bit counter channels and a built-in programmable timer for frequency measurement. The relay module offers six isolated digital input channels and six isolated relay channels.

EtherNet/IP Modules

Advantech's ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Equipped with the EtherNet/IP protocol, ADAM-6100EI series also allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chains also provide a more scalable system and using fewer wire s helps avoid interference common in factory settings. Their isolated design prevents the ADAM-6100 series from breaking down and helps resist harmful field interference.

 

 

ADAM-6051

14-ch Isolated Digital I/O Modbus TCP Module with 2-ch Counter


Main Features

  • Provide default/customized web page
  • 10/100 Mbps communication rate
  • 5 KHz counter
  • I/O type: 12 DI / 2DO / 2 Counter
 
Introduction


The ADAM-6051 provides 12 digital inputs, 2 digital outputs, and 2 counters with 2000VRMS isolation protection. This mixed-function module built-in Ethernet port and web page.
Specifications
Part Number ADAM-6051-BE
Analog Input Channels -
Voltage<br>
Input		 -
Analog Output Channels -
Voltage<br>
Output		 -
Digital I/O Digital Input
Channels		 12
Digital Output
Channels		 2 (Sink)
General GCL1 Yes
Interface 10/100 Mbps Ethernet
Peer-to-Peer1 Yes

 

ADAM-6050

18-ch Isolated Digital I/O Modbus TCP Module


Main Features

  • Provide default/customized web page
  • Support Dry/Wet contact
  • 10/100 Mbps communication rate
  • I/O Type: 12 DI & 6 DO
 
Introduction


The ADAM-6050 is a high-density I/O module built-in a 10/100 based-T interface for seamless Ethernet connectivity. It provides 12 digital input and 6 digital output channels with 2000VRMS Isolating protection.
Specifications
Part Number ADAM-6050-BE
Analog Input Channels -
Voltage<br>
Input		 -
Analog Output Channels -
Voltage<br>
Output		 -
Digital I/O Digital Input
Channels		 12
Digital Output
Channels		 6 (Sink)
General GCL1 Yes
Interface 10/100 Mbps Ethernet
Peer-to-Peer1 Yes

 

ADAM-6052

16-ch Source-type Isolated Digital I/O Modbus TCP Module


Main Features

  • 8 Channel
  • 8 DI/8 DO
  • VDC: 35 V
  • Optical Isolation: 2000 Vrms
 
Introduction


16-channel Source Type Digital I/O Module
Specifications
Part Number ADAM-6052-BE
Analog Input Channels -
Voltage<br>
Input		 -
Analog Output Channels -
Voltage<br>
Output		 -
Digital I/O Digital Input
Channels		 8
Digital Output
Channels		 8 (Source)
General GCL1 Yes
Interface 10/100 Mbps Ethernet
Peer-to-Peer1 Yes

 

More Articles ...

  1. ADAM-6060
  2. ADAM-6066
  3. Ethernet Digital I/O Modules
  4. ADAM-6117EI
Page 109 of 156

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

Latest projects

  • 1

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2
› ‹