• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

SIWAREX Weighing modules

siwarex wp231 172

The weighing modules of the SIWAREX-WP2xx series are technology modules of the basic controllers SIMATIC S7-1200 and can be used in many fields of application: Beside that they are seamlessly integrated in TIA Portal.
In combination with the available standard components (CPU,HMI, DI, DQ, etc.) freely programmable weighing systems can be created and adapted to every specific requirement.
The excellent measuring values such as the high resolution of up to +/- four million parts guarantee a reliable weight measuring as well as accurate dosing results.

Article

Use in

Article no.

SIWAREX WP231

  
siwarex wp231 172

Legal-for-trade weighing module (1 channel)
for the connection to strain-gauge load cells /strain-gauge full bridge
(1-4MV/V) for SIMATIC S7-1200, RS485
and Ethernet interface, 
Onboard I/O: 4 DI / 4 DQ, 1 AQ (0/4...20MA)
Attention: for legal-for-trade applications please consider the calibration instructions of the destinated country! 
Direct Modbus connection to SIMATIC HMI panels in preparation

Gravimetric level measurement in silos and hoppers, platform scales

7MH4960-2AA01

SIWAREX WP 241

  
siwarex wp241 172

Belt scale weighing module (1 channel) for the connection to
strain-gauge load cells /strain-gauge full bridge
(1-4MV/V) for SIMATIC S7-1200, RS485 and Ethernet interface, 
Onboard I/O: 4 DI / 4 DQ, 1 AQ (0/4...20MA)

Belt scales

7MH4960-4AA01

SIWAREX WP 251

  
siwarex wp251 172

Weighing module (1 channel) for the connection to strain-gauge load cells /strain-gauge full bridge
(1-4MV/V) for SIMATIC S7-1200, RS485 and Ethernet interface, 
Onboard I/O: 4 DI / 4 DQ, 1 AQ (0/4...20MA)
Attention: for legal-for-trade applications please consider the calibration instructions of the destinated country! 
Direct Modbus connection to SIMATIC HMI panels in preparation

Dosing and batching processes

7MH4960-6AA01

sm1281 condition monitoring

The SIMATIC S7-1200 condition monitoring system is able to continually check up on the state of the mechanical components. In this way, it creates the basis for predictive maintenance. Users can respond promptly to impending damage and avoid the costly consequences that may include total failure. SIPLUS CMS1200 therefore makes acrucial contribution toward greater plant availability.

As many as 28 vibration sensors can be connected for each SIMATIC
S7-1200 CPU. The recorded data is analyzed by the internal software of the CMS1200 and stored on the SM 1281 condition monitoring module.

Benefits

  • Easy integration of the condition monitoring of mechanical components into the SIMATIC S7-1200 automation

  • Early detection of mechanical damage

  • Planned maintenance instead of spontaneous repair

  • No additional software for diagnostics and visualization

  • Easy archiving of the data

  • Further analysis options by means of raw data

The Condition Monitoring Module SM1281

  • Software for parameter-based and frequency-selective onboard analysis

  • Easy archiving of the data in the system’s own memory (800 MB)

  • Connection options:
    – 4 IEPE vibration-acceleration sensors per SM 1281
    – 1 rotary speed sensor per SM
    – Up to seven SM 1281 modules per S7-1200 CPU

Article

Use in

Article no.

Condition Monitoring Module SM 1281

SIMATIC S7-1200 
starting with CPU212

6AT8007-1AA10-0AA0

SIPLUS CMS1200 SM 1281 shield clamp set

SIMATIC S7-1200

6AT8007-1AA20-0AA0

SIPLUS CMS2000 VIB-SENSOR*

SIMATIC S7-1200

6AT8002-4AB00

SIPLUS CMS2000, CABLE-MIL-300*,
3m

SIMATIC S7-1200

6AT8002-4AC03

 

 

Extension units

Powered extension units are I/O extension devices with built-in power supply.

Like with the main unit, various I/O devices and special devices can be connected after a powered extension unit.

Model Total number
of points		 Number of input/output points
Input/output type		 Applicable FX PLC
Input Output FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
AC Power Type
FX2N-32ER 32 points 16 points 24 V DC
(sink)		 16 points Relay × ○ ○ × ×
FX2N-32ER-ES/UL 24 V DC
(sink/
source)
FX2N-32ES 24 V DC
(sink)		 Triac
FX2N-32ET 24 V DC
(sink)		 Transistor
(sink)
FX2N-32ET-ESS/UL 24 V DC
(sink/
source)		 Transistor
(source)
FX2N-48ER 48 points 24 points 24 V DC
(sink)		 24 points Relay × ○ ○ × ×
FX2N-48ER-ES/UL DC24V
(sink/
source)
FX2N-48ET 24 V DC
(sink)		 Transistor
(sink)
FX2N-48ET-ESS/UL 24 V DC
(sink/
source)		 Transistor
(source)
FX2N-48ER-UA1/UL 48 points 24 points 100 V AC 24 points Relay × ○ ○ × ×
DC Power Type
FX2N-48ER-D 48 points 24 points 24 V DC
(sink)		 24 points Relay × ○ ○ × ×
FX2N-48ER-DS 24 V DC
(sink/
source)
FX2N-48ET-D 24 V DC
(sink)		 Transistor
(sink)
FX2N-48ET-DSS 24 V DC
(sink/
source)		 Transistor
(source)

 


Regarding connection cable

A connection cable (length: 55mm), used to connect to the the right side of the device in front of the powered extension unit, is included with the powered extension unit.
To extend the distance of the connection, please use the optional "extension cable".

 

Function expansion board

The expansion board is designed to add the input and output terminal whose points are small to FX3S or FX3G PLCs. The board can be built in the PLC.

Model Total
number
of
points		 Number of input/output points
Input/output type		 Applicable FX PLC
Input Output FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
FX3G-4EX-BD 4
points		 4
points		 24 V DC
(sink/
source)		 - - *1
○
Max.
1 unit		 *2
○
Max.
1 unit		 × × ×
FX3G-2EYT-BD 2
points		 - - 2
points		 Transistor
(sink/
source)		 *1
○
Max.
1 unit		 *2
○
Max.
1 unit		 × × ×

 


*1: Supported by FX3S ver.1.10 and later.

*2: Supported by FX3G ver.2.20 and later.

 

Extension blocks

Extension block is an I/O extension device that receives power from the main unit or powered extension unit.

It can be connected in 8 point or 16 point units. The connectable number of points is determined by each main unit or powered extension unit

Model Total number
of points		 Number of input/output points
Input/output type		 Applicable FX PLC
Input Output FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
Input/output extension blocks
FX2N-8ER 8 points 4 points
(8 devices
are occupied.)		 24 V DC
(sink)		 4 points
(8 devices
are occupied.)		 Relay × ○ ○ *1
*2
○		 *1
*2
○
FX2N-8ER-ES/UL DC24V
(sink/
source)
FX2N-8EX 8 points 24 V DC
(sink)		 - -
FX2N-8EX-ES/UL DC24V
(sink/
source)
FX2N-8EX-UA1/UL 100 V AC
FX2N-16EX 16 points 16 points 24 V DC
(sink)		 × ○ ○ *1
*2
○		 *1
*2
○
FX2N-16EX-ES/UL 24 V DC
(sink/
source)
FX2N-16EX-C
Connector input		 24 V DC
(sink)
FX2N-16EXL-C
Connector input		 5 V DC
Output extension blocks
FX2N-8EYR 8 points - - 8 points Relay × ○ ○ *1
*2
○		 *1
*2
○
FX2N-8EYR-ES/UL
FX2N-8EYR-S-ES/UL Relay
(8 points/common)
FX2N-8EYT Transistor
(sink)
FX2N-8EYT-H
FX2N-8EYT-ESS/UL Transistor
(source)
FX2N-16EYR 16 points 16 points Relay × ○ ○ *1
*2
○		 *1
*2
○
FX2N-16EYR-ES/UL
FX2N-16EYS Triac
FX2N-16EYT Transistor
(sink)
FX2N-16EYT-ESS/UL Transistor
(source)
FX2N-16EYT-C
Connector output		 Transistor
(sink)


*1 :For connection to FX3GC or FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

*2 :Depending on the model name of the main unit, I/O extension device connection may or may not be allowed. For details, refer to the manual of the main unit.


Regarding connection cable

A connection cable, used to connect to the right side of the device in front of the extension block, is included with the extension block.

To extend the distance of the connection, please use the optional "extension cable (FX0N-30EC/FX0N-65EC)" and "connector conversion adapter (FX2N-CNV-BD)".

 

Extension block for connector type main unit (FX3GC, FX3UC)

These I/O extension devices can be directly connected to FX1NC, FX3GC, FX2NC, FX3UC PLCs.

They can be compactly extended because connection cables are not needed.

Model Total number
of points		 Number of input/output points
Input/output type		 Applicable FX PLC
Input Output FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
Input extension blocks
FX2NC-16EX-T
Terminal block input		 16 points 16 points 24 V DC
(sink)		 - - × × × *
○		 *
○
FX2NC-16EX-T-DS
Terminal block input		 DC24V
(sink/
source)
FX2NC-16EX DC24V
(sink)
FX2NC-16EX-DS DC24V
(sink/
source)
FX2NC-16EX-D/UL DC24V
(sink)
FX2NC-32EX 32 points 32 points 24 V DC
(sink)
FX2NC-32EX-DS DC24V
(sink/
source)
FX2NC-32EX-D/UL DC24V
(sink)
Output extension blocks
FX2NC-16EYR-T
Terminal block Output		 16 points - - 16 points Relay × × × *
○		 *
○
FX2NC-16EYR-T-DS
Terminal block output
FX2NC-16EYT Transistor
(sink)
FX2NC-16EYT-DSS Transistor
(source)
FX2NC-16EYT-D/UL Transistor
(sink)
FX2NC-32EYT 32 points 32 points Transistor
(sink)
FX2NC-32EYT-DSS Transistor
(source)
FX2NC-32EYT-D/UL Transistor
(sink)
Input/output extension blocks
FX2NC-64ET 64 points 32 points 24 V DC
(sink)		 32 points Transistor
(sink)		 × × × *
○		 *
○

 

*: Depending on the model name of the main unit, I/O extension device connection may or may not be allowed. For details, refer to the manual of the main unit

 

FX PLC Main Unit

catch

A wide lineup in FX series offers you many choices to fit to your budget and application.
You are sure to find a model that fulfills your needs.

FX Series Lineup
For high speed,
high functionality,
and expandability
Memory
64,000 step RAM memory built-in. Flash memory cassette can also be mounted.
Processing speed
Basic instruction: 0.065 μs/instruction (LD instruction) Application instruction: 0.642 to 100 μs/instruction
Device
Auxiliary relay: 7,680 pts Timer: 512 pts Counter: 235 pts Data register: 8,000 pts
Extension register: 32,768 pts Extension file register (optional memory): 32,768 pts
Application instruction
List of supported application instructions

For high speed,
reduced wiring,
reduced space
Memory
64,000 step RAM memory built-in. Flash memory cassette can also be mounted.
Processing speed
Basic instruction: 0.065 μs/instruction (LD instruction) Application instruction: 0.642 to 100 μs/instruction
Device
Auxiliary relay: 7,680 pts Timer: 512 pts Counter: 235 pts Data register: 8,000 pts
Extension register: 32,768 pts Extension file register (optional memory): 32,768 pts
Application instruction
List of supported application instructions

For communication,
analog expansions,
and up to 256 I/O control
Memory
32,000 step EEPROM memory built-in. Battery-free and maintenance-free.
Processing speed
Basic instruction: 0.21μs/instruction (in standard mode) 0.42μs/instruction (in extension mode)
Application instruction: 0.5 to 100 μs/instruction (in standard mode) 1.2 to 100 μs/instruction (in extension mode)
Device
Auxiliary relay: 7,680 pts Timer: 320 pts Counter: 235 pts Data register: 8,000 pts
Extension register: 24,000 pts Extension file register: 24,000 pts
Application instruction
List of supported application instructions

*1: 14pt, 24pt models can only connect 1 board
*2: 14pt, 24pt models have 2 independent axes
For reduced space and
reduced wiring
Memory
32,000 step EEPROM memory built-in. Battery-free and maintenance-free.
Processing speed
Basic instruction: 0.21 μs/instruction (in standard mode) 0.42 μs/instruction (in extension mode)
Application instruction: 0.5 to 100 μs/instruction (in standard mode) 1.2 to 100 μs/instruction (in extension mode)
Device
Auxiliary relay: 7,680 pts Timer: 320 pts Counter: 235 pts Data register: 8,000 pts
Extension register: 24,000 pts Extension file register: 24,000 pts
Application instruction
List of supported application instructions

For communication,
analog expansions,
and low cost
Memory
16,000 step EEPROM memory built-in. Battery-free and maintenance-free.
(Program capacity is 4,000 steps)
Processing speed
Basic instruction: 0.21 μs/instruction
Application instruction: 0.5 to 100μs/instruction
Device
Auxiliary relay: 1,536 pts Timer: 138 pts Counter: 67 pts Data register: 3,000 pts
Application instruction
List of supported application instructions

 

Explanation of the icons
Depending on control points, total 256 I/O extension devices can be connected.
*Includes CC-Link remote I/O
FX3U/FX3UC can count at high speed input frequency 100kHz (1-phase 6pts), 50kHz (2-phase 2pts), 10kHz (1-phase 2pts).
Depending on control points, total 384 I/O extension devices can be connected.
*Includes CC-Link remote I/O
FX3S/FX3GC has 2 axes simple positioning function built into the main unit.
Depending on the purpose, various special function blocks can be connected.
FX3G/FX3U/FX3UChas 3 axes simple positioning built into the main unit.
*FX3G 14 pt, 24 pt models have independent 2 axes.
Function can be easily added by mounting a function expansion board to the main unit.
I/O can be connected in connector format, reducing wiring effort.
In FX3UC-32MT-LT, CC-Link/LT master functionality is built-in.
1 phase: 60 kHz x 4 pts/ 10 kHz x 2 pts    2 phase: 30 kHz x 2 pts/ 5 kHz 1 pt
1 phase: 60 kHz x 2 pts/ 10 kHz x 4 pts     2 phase: 30 kHz x 1 pt/ 5 kHz 1 pt
In FX3S-30MR/ES-2AD, FX3S-30MT/ES-2AD, and FX3S-30MT/ESS-2AD, 2ch analog input (current input) function is built-in.
 
 

High speed counter block/adapter

Model
(Number of channels)		 Type Highest response
frequency		 Hardware comparison
output function		 2-phase counter
edge count function		 Applicable FX PLC
FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
FX2N-1HC
(1ch)
 1-phase
1-count		 Max. 50 kHz ○ - × × ○
Max.
8 units		 × *2*3
○
Max.
8 units
1-phase
2-count		 Max. 50 kHz
2-phase
2-count		 1 edge count:
Max. 50 kHz
2 edge count:
Max. 25 kHz
4 edge count:
Max. 12.5 kHz		 ○
FX3U-2HC
(2ch)
 1-phase
1-count		 Max. 200 kHz ○ - × × ○
Max.
8 units		 × *2
○
Max.
4 units
1-phase
2-count		 Max. 200 kHz
2-phase
2-count		 1 edge count:
Max. 200 kHz
2 edge count:
Max. 100 kHz
4 edge count:
Max. 50 kHz		 ○
FX2NC-1HC
(1ch)
 1-phase
1-count		 Max. 50 kHz ○ - × × × × *3
○
Max.
8 units
1-phase
2-count		 Max. 50 kHz
2-phase
2-count		 1 edge count:
Max. 50 kHz
2 edge count:
Max. 25 kHz
4 edge count:
Max. 12.5 kHz		 ○
FX3U-4HSX-ADP
(4ch)
 1-phase
1-count		 Max. 200 kHz × ○ × × *1
○
Max.
2 units		 × ×
1-phase
2-count		 Max. 200 kHz
2-phase
2-count		 1 edge count:
Max. 100 kHz
4 edge count:
Max. 100 kHz

*1: When used together with analog or communication adapters, function expansion board is required.
*2: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

 

High-speed output special adapter

Model Number of
controlled axis		 Maximum
frequency		 Applicable FX PLC
FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
FX3U-2HSY-ADP Independent two axes 200kHz × × *
○
Max.
2 units		 × ×

*: When used together with analog or communication adapters, function expansion board is required

Pulse output block

Model Number of
controlled axis		 Maximum
frequency		 Applicable FX PLC
FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
FX3U-1PG Independent one axis 200kHz × × *3
○
Max.
8 units		 × *1*3
○
Max.
6 units
FX2N-10PG Independent one axis 1MHz(1 Hz to 1 MHz
differential line driver output)		 × × ○
Max.
8 units		 × *1*2
○
Max.
8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.
*3: FX3U, FX3UC supported from version 2.20 or later.

 

SSCNET

Model Number of
controlled axis		 Maximum
frequency		 Applicable FX PLC
FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
FX3U-20SSC-H Ｔwo axes
(Independent/Simultaneous)		 - × × ○
Max.
8 units		 × *1*2
○
Max.
8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

 

Positioning dedicated unit

Model Number of
controlled axis		 Maximum
requency		 Applicable FX PLC
FX
3S		 FX
3G		 FX
3U		 FX
3GC		 FX
3UC
FX2N-10GM Independent one axis 200kHz × × ○
Max.
8 units		 × *1*2
○
Max.
8 units
FX2N-20GM Two axes
(Independent/Simultaneous)		 200kHz

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D，FX3UC-**MT/DSS，FX3UC-16MR/D(S)-T: 8 units.

 

More Articles ...

  1. MITSUBISHI Fx Analog
  2. MITSUBISHI Fx Communication
  3. MITSUBISHI Q Cpu
  4. MITSUBISHI Q Digital module
Page 20 of 156

Welcome to PAKPLC

35 years of experience in Control Systems

123

We are industrial automation consultants and products supplier. Our products include Programmable Logic Controllers (PLC), HMI, VFD, Servo drives and related control equipment from Siemens (PLC, HMI, VFD), Mitsubishi PLC, Allen Bradley (PLC, HMI) and Omron (PLC, HMI). We also provide signal transmitters and Industrial Communication serial/wireless servers and gateways from Advantech Industrial Communication.

We provide engineering services to various industries, including Pharmaceutical, Chemical, Packaging, Automotive, Textile, Food and Beverage, Battery Manufacturers, Cement and Petrochemical industries. Our services range from complete plant and machinery installation and commissioning service, automation system design, PLC and HMI Programming, field wiring, calibration, start-up tests, upgradation of obsolete controls, troubleshooting, field maintenance and electronic repair of industrial controls.

Our project division is capable of design, commissioning, procurement, and maintenance of turnkey automation projects. We have a versatile software development and system integration experience making us ideal service providers for design and commissioning of DCS and SCADA based systems. We have hands-on experience on SIEMENS PCS7.


Call us

+92-21-35070751
+92-306-2266507

Increased Production

Plant downtime reduction through built-in diagnostics that pinpoint fault location.

Safety Integrated

Ensure plant and personal safety with Fail Safe system approved for application up to SIL 3.

Security Integrated

Intellectual property is safeguarded through integrated knowledge, access,manipulation and password protection features.

Updated tech

Laverage the benefits of latest technology in monitoring and control.

 

 

 

Our services

Installation

Installation and Commissioning

C&M is an ideal partner for installation and commissioning of your new plant or machine

Designing

Designing Services

We are leading Systems Integrator providing integrated engineering solutions, systems and services that address the needs of today.

repair services

Controls Repair

Factory repair, and partial or complete reconditioning of all kinds of electronic control systems.

On Site Troubleshooting

On-Site Troubleshooting

Our field support engineers assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Retrofit Controls

Retrofit Controls

Evolve, upgrade or migrate to a new generation of hardware and software, and extend the life of your equipment.

Assessment Services

Assessment Services

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls.

150

Happy clients

200

Projects completed

30

Qualified Employees

2000000

Spare Inventory

Latest projects

  • 1

What we do

We provide industrial automation products, services and consultancy. From breakdown maintenance to turnkey projects our services division is geared for all kinds of automation challenges. Having experience on multiple vendor systems like ABB, Advantech, Allen Bradley, Mitsubishi, Omron, Siemens and Yokogawa, our service engineers can help you restore an old plant or even build a new one!

Why choose us

  • Quality Service

    With siemens automation certified engineers,we ensure that our clients get the best engineering service at an affordable price.

  • Reliable Service

    Because end-user look for more than an equipment supplier.C&M stands by its client over the entire plant lifecycle,delivering professional services to ensure safe,stable and efficient operation.

Our clients

  • 1
  • 2
› ‹