About us

Industrial Automation Products and Services PLC | HMI | VFD | SERVO

Address

C-188, Sector 31-D, P&T Society,

Korangi Industrial Area,

Karachi-74900,

Pakistan
Call us on

+92-21-35070751

+92-300-5776703
Mail us @

info@pakplc.com

automotive industry 2

Industry 1536x1536 Standard

services5

We are Pakplc

With over 32 years of experience

C&M Engineering, geographically located in Asia, business city Karachi the heart of Pakistan. Republic in southern Asia, at 23.30º to 36.45º north latitude, and 61º to 75.31º east longitude, bounded on the north and north-west by Afghanistan, on the north-east by China, on the east and south-east by India, on the south by the Arabian Sea and on the west by Iran. The area of Pakistan is 796,095 sq. km (307,374 sq. mi). The time zone of Pakistan is GMT+5. The capital of Pakistan is Islamabad, the largest city of the country is Karachi.

C&M established in 1986, helping manufacturers succeed and grow is what we do best — with industrial automation control and information solutions designed to give our customers a competitive advantage. From stand-alone, industrial components to enterprise-wide integrated systems, our solutions have proven themselves across a wide range of industries and in some of the most demanding manufacturing environments.

End users and machine builders (OEMs) alike rely on our comprehensive portfolio of equipment, software and serivices to deliver value and help them meet their objectives.

Recognized Expertise

We are recognized System Integrators for Siemens Factory Automation Products

Product development

In house development of Embedded Solutions

Pakistan Engineering Council

Siemens Approved System Integrator

APAX-5070

APAX-5070

Modbus/TCP Communication Coupler
		Main Features Support Modbus/TCP protocol which can be connected with Modbus/TCP master Dynamic configuration allows users to configure multiple inputs functions in one module Two RJ-45 ports with the same IP address for building daisy chains Flexible Modbus address mapping either automatically or manually Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points) With 16 sets of onboard alarm which can be enabled by utility without any programming

Introduction
The APAX-5070 is a high-density Modbus/TPC remote I/O solution that allows any PC, controller, or HMI device that supports Modbus/TCP protocol to easily and cost-effectively add remote I/O functionality to access data and perform read and write actions. By leveraging the Advantech APAX product line features such as, high density I/O, flexibility, scalability, and hot swap functionality, users can build remote I/O systems to fulfill PLC or control application needs.
Specifications
Part Number		APAX-5070-AE
Communications	Analog Signals	512 (max.)
	Connected I/O Modules	32 (max.)*
	Data Transfer Rates	10/100 Mbps
	Digital Signals	2048 (max.)
	Protocol	Modbus/TCP
General	Connectors	2 x RJ-45 (2-channel switch, share same IP address)
	Description	Modbus/TCP Communication Coupler
	Operating Temperature	-10 ~ 60°C (when mounted vertically)
	Relative Humidity	5 ~ 95% (non-condensing)
	Storage Temperature	-40 ~ 70°C
	Topology	Line or star wiring

APAX-5071

APAX-5071

PROFINET Communication Coupler
		Main Features 2 x RJ-45 (2-channel switch, share same IP address) Connector PROFINET Communication Couple

Introduction
PROFINET Communication Coupler
Specifications
Part Number		APAX-5071-AE
Communications	Analog Signals	512 (max.)
	Connected I/O Modules	32 (max.)*
	Data Transfer Rates	100 Mbps
	Digital Signals	2048 (max.)
	Protocol	Mo PROFINET RT, DCP, DHCP, TCP/UDP, DNS, SNTP, ICMP dbus/TCP
General	Connectors	2 x RJ-45 (2-channel switch, share same IP address)
	Description	PROFINET Communication Coupler*
	Operating Temperature	-10 ~ 60°C (when mounted vertically)
	Relative Humidity	5 ~ 95% (non-condensing)
	Storage Temperature	-40 ~ 70°C
	Topology	Line or star wiring

APAX-5090P

APAX-5090P

4-port RS-232/422/485 Communication Module
		Main Features Four COM ports for APAX controller with PCI interface COM1, COM2: RS-422/485 COM3, COM4: RS-232/422/485 Baud rate: 50 bps ~ 230.4 kbps 15 kV ESD protection 2500 VDC EFT protection 2500 VDC isolation protection (between COM ports and backplane)

Introduction
4-port RS-232/422/485 Communication Module
Specifications
Part Number		APAX-5072-AE
General	Certifications	CE, FCC class A
	Interface	COM 1, COM 2: RS-422/485, COM 3, COM 4: RS-232/422/485
	Connectors	1 x 26-pin clamp-type terminal
	Dimensions (W x H x D)	30 x 139 x 100 mm
	Enclosure	ABS+PC
	Weight	180 g
	Power Consumption	2 W @ 5 VDC (typical)
Communications	Data Bits	5, 6, 7, 8
	Stop Bits	1, 1.5, 2
	Parity	None, even, odd
	Baud Rate	50 bps ~ 230.4 kbps
	Baud Rate	RS-232: TxD, RxD, RTS, CTS, GND RS-422: Tx+, Tx-, Rx+, RX- RS-485: Data+, Data-
	FIFO	128 bytes
	Flow Control	RTS/CTS, Xon/Xoff
Enviroment	Operating Temperature	0 ~ 60° C (mounted vertically)
	Storage Temperature	-40 ~ 70° C
	Relative Humidity	5 ~ 95% (non-condensing)
Protection	ESD Protection	15 kV
	EFT Protection	2,500 VDC
	Isolation Protection	2,500 VDC (between COM port and backplane)

APAX-5072

APAX-5072

EtherNet/IP Communication Coupler
		Main Features Get ODVA (Open DeviceNet Vendors Association ) authorized conformance certification Support Ethernet/IP protocol which can be connected with Ethernet/IP master Dynamic configuration allows users to configure different channels with different type and range in one module Two RJ-45 ports with the same IP address for building daisy chains, saving IP address used and installation cost Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points) Easily create L5K I/O configuration file by utility and leverage it within application software

Introduction
The APAX-5072 is a high-density Ethernet/IP remote I/O solution that allows any PC, controller, or HMI device that supports Ethernet/IP protocol to easily and cost-effectively add remote I/O functionality to access data and perform read and write actions. By leveraging the Advantech APAX product line features such as, high density I/O, flexibility, scalability, and hot swap functionality, users can build remote I/O systems to fulfill PLC or control application needs.
Specifications
Part Number		APAX-5072-AE
Communications	Analog Signals	512 (max.)
	Connected I/O Modules	32 (max.)*
	Data Transfer Rates	10/100 Mbps
	Digital Signals	2048 (max.)
	Protocol	Ethernet/IP
General	Connectors	2 x RJ-45 (2-channel switch, share same IP address)
	Description	Ethernet/IP Communication Coupler
	Operating Temperature	-10 ~ 55°C (when mounted vertically)
	Relative Humidity	5 ~ 95% (non-condensing)
	Storage Temperature	-40 ~ 70°C
	Topology	Line or star wiring

APAX-5095P

APAX-5095P

2-port CANopen Communication Module
		Main Features 2500 VDC isolation protection Supports PDO transmission mode Supports NMT and SDO communication object Supports Heartbeat producer and consumer Supports Emergency objects

Introduction
2-port CANopen Communication Module
Specifications
Part Number		APAX-5095P-AE
Communications	Protocol	CANopen
Communications	Speed	Max. 1 Mbits/s
Environment	Operating Temperature	1 x 26-pin clamp-type terminal
	Relative Humidity	30 x 139 x 100 mm
	Storage Temperature	ABS+PC
General	Certifications	CE, FCC class A
	Connectors	DB9
	Dimensions (W x H x D)	30 x 139 x 100 mm
	Enclosure	ABS+PC
	Interface	2 x CAN Bus
	Power Consumption	2 W @ 5 VDC (typical)
	Weight	180 g
Protection	Isolation Protection	2,500 VDC

More Articles ...

Page 71 of 156

Reverse engineering

Extensive reverse engineering service for obsolete controls

Maintenance services

Complete electronic and instrumentation maintenance service for all plants and machines

Green energy

Striving to reduce carbon foot-print, and extensively involved in deployment of renewable energy projects.