• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

Strain Gauge Isolated Transmitter ADAM-4016

1-ch Analog Input/Output Module


Main Features

  • Strain Gauge Input
  • Watchdog Timer
 
Introduction


Strain gauge input module uses a microprocessor-controlled integrating A/D converter to convert sensor voltage or current signals into digital data for load cell and stress measurement. The digital data is then translated into either engineering units, twos complement hexadecimal format or percent-age of full-scale range (FSR)according to the module 's configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The strain gauge input module offers signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 VDC .
Specifications
Part Number ADAM-4016-A2E
Analog Input Burn-out 
Detection		 -
Channel 
Independent 
Configuration		 -
Current Input ±20 mA
Direct Sensor 
Input		 -
Voltage Input ±15 mV 
±50 mV 
±100 Mv 
±500 mV
Analog Output Current Output 30 mA
Voltage Output 0 - 10 V
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 N/A
Other Isolation 3000 VDC

ADAM-4017

8-ch Analog Input Module


Main Features

  • Channels: Six differential, two single-ended
  • Input type: mV, V, mA
  • Sampling rate: 10 samples/sec. (total)
 
Introduction


The ADAM-4017 is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. This module is an extremely cost-effective solution for industrial measurement and monitoring applications. Its opto-isolated inputs provide 3000 VDC of isolation between the analog input and the module, protecting the module and peripherals from damage due to high input-line voltages. ADAM-4017 offers signal conditioning, A/D conversion, ranging and RS-485 digital communication functions. The module protects your equipment from ground loops and power surges by providing optoisolation of A/D input and transformer based isolation up to 3000 VDC. The ADAM-4017 uses a 16-bit microprocessor-controlled sigma-delta A/D converter to convert sensor voltage or current into digital data. The digital data is then translated into engineering units. When prompted by the host computer, the module sends the data to the host through a standard RS-485 interface.
Specifications
Part Number ADAM-4017-D2E
Analog Input Burn-out 
Detection		 -
Channel 
Independent 
Configuration		 Yes
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 -
Voltage Input 0 ~ 150 mV, 0 ~ 500 mV, 
0 ~ 1V, 0 ~5 V, 0 ~ 10 V,
Analog Output Current Output -
Voltage Output -
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

ADAM-4018

8-ch Thermocouple Input Module


Main Features

  • Channels: Six differential, two single-ended
  • Input type: Thermocouple, mV, V, mA
  • Fault and overvoltage protection
  • Watchdog Timer
 
Introduction


The ADAM-4017/4018 is a 16-bit,8-channel analog input module that provides programmable input ranges on all channels. This module is an extremely cost-effective solution for industrial measurement and monitoring applications. Its opto-isolated inputs provide 3000 V DC of isolation between the analog input and the module, protecting the module and peripherals from damage due to high input voltages. ADAM-4017/4018 offers signal conditioning, A/D conversion, ranging and RS-485 digital communication functions. The module protects your equipment from ground loops and power surges by providing opto-isolation of A/D input and transformer based isolation up to 3000 V DC . The ADAM-4017/4018 uses a 16-bit microprocessor-controlled sigma-delta A/D converter to convert sensor voltage or current into digital data. The digital data is then translated into engineering units. When prompted by the host computer, the module sends the data to the host through a standard RS-485 interface.
Specifications
Part Number ADAM-4018-D2E
Analog Input Burn-out 
Detection		 N/A
Channel 
Independent 
Configuration		 -
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 J, K, T, E, R , S, B 
Thermocouple
Voltage Input -
Analog Output Current Output -
Voltage Output -
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

ADAM-4017+

8-ch Analog Input Module with Modbus


Main Features

  • 16-bit resolution
  • Eight different inputs
  • Software configurable for mV, V or mA inputs
  • 3000 Vdc isolation
  • Supports Modbus/RTU Protocol
  • Supports 4~20mA
 
Introduction


The ADAM-4017+ is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. These modules are an extremely cost-effective solution for industrial measurement and monitoring applications. 3000 VDC optical isolation between the analog input and the modules protects the modules and peripherals from damages caused by high input voltages.
Specifications
Part Number ADAM-4017+-CE
Analog Input Burn-out 
Detection		 N/A
Channel 
Independent 
Configuration		 Yes
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 N/A
Voltage Input 0 ~ 150 mV, 0 ~ 500 mV, 
0 ~ 1V, 0 ~5 V, 0 ~ 10 V,
Analog Output Current Output N/A
Voltage Output N/A
Digital I/O Digital Input 
Channel		 N/A
Digital Ouput 
Channel		 N/A
Other Isolation 3000 VDC

ADAM-4018+

8-ch Thermocouple Input Module with Modbus


Main Features

  • 16-bit resolution
  • Eight different inputs
  • Software configurable for T/C, low level voltage or mA inputs
  • Wiring burned-out detectable function
  • 3000 Vdc isolation
  • Supports Modbus/RTU Protocol
  • Supports 4~20mA
 
Introduction


The ADAM-4018+ is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. These modules are an extremely cost-effective solution for industrial measurement and monitoring applications. 3000 VDC optical isolation between the analog input and the modules protects the modules and peripherals from damages caused by high input voltages.
Specifications
Part Number ADAM-4018+-BE
Analog Input Burn-out 
Detection		 Yes
Channel 
Independent 
Configuration		 -
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 J, K, T, E, R , S, B 
Thermocouple
Voltage Input -
Analog Output Current Output -
Voltage Output -
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

More Articles ...

  1. ADAM-4019+
  2. ADAM-4021
  3. ADAM-4022T
  4. ADAM-4024
Page 90 of 156
  • Allen Bradley

Programmable Controllers

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology embodied in the scalable, multi-disciplined and information-enabled programmable automation controller (PAC). Allen Bradley safety-certified controllers support your SIL 2 and SIL 3 application needs. Allen Bradley offer multiple controller types and sizes to fit your specific needs.

largecontrollerfamily front1 smprod
Large Control Systems

Allen Bradley Large Control Systems fit your most demanding application needs. They offer modular architectures and a range of I/O and network options. These powerful control solutions deliver world-class capabilities for all disciplines, from process to safety to motion. Designed for distributed or supervisory control applications, Allen Bradley large programmable automation controllers (PACs) and programmable logic controllers (PLC) provide exceptional reliability and performance.

smallcontrollerfamily front1 smprod

Small Control Systems 

The perfect solution for your mid-range applications, Allen Bradley small controllers offer the features and flexibility you need without the overhead of larger systems. Choose from standard and safety-certified controllers in chassis-based, packaged and modular designs. Typical applications include complex machine control, batch processing and building automation.

micronanocontrollerfamily front1 smprod

Micro & Nano Control Systems

Allen Bradley micro nano PLCs provide economical solutions to basic control needs for your simple machines ranging from relay replacement to simple control timing and logic. Compact packaging, integrated I/O and communication, and ease of use make these controllers an ideal choice for applications such as conveyor automation, security systems, and building and parking lot lighting.