• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-4056SO

12-ch Source Type Isolated Digital Output Module with Modbus


Main Features

  • DO Source Power Failure Detection
  • I/O Type: Source Type Output
  • 12 Channels
  • Digital Output: VCC: 1-~35 Vdc, Current: 1A (per ch.)
  • Over Current Detection
 
Introduction


12-channel Source Type Isolated Digital Output Module
Specifications
Part Number ADAM-4056SO-AE
Analog Input Burn-out Detection -
Channel Independent Configuration -
Current Input -
Direct Sensor Input -
Voltage Input -
Analog Output Current Output -
Voltage Output -
Digital Output Digital Input 
Channel		 -
Digital Ouput 
Channel		 12 (Source)
Other Isolation 5000 VDC

ADAM-4060

4-ch Relay Output Module


Main Features

  • 4-channels relay, two Form A and two Form C
  • Breakdown voltage: 500 VAC (50/60 Hz)
  • Insulation resistance: 1000 M ohms minimum at 500 V DC
 
Introduction


The ADAM Relay Output Module is a low-cost alternative to SSR modules. The ADAM Relay Output Module provides four relay channels, two of Form A and two of Form C. This module is excellent for ON/OFF control or low-power switching applications.
Specifications
Part Number ADAM-4060-DE
Digital Input Channles -
Input Voltage -
Digital Output Channels 4-ch relay
Power Dissipation -
General Isolation -
Watchdog Timer Yes (System)

ADAM-4069

8-ch Power Relay Output Module with Modbus


Main Features
 
Introduction


ADAM-4069 is designed for on/off control in high-voltage applications. The major feature of ADAM-4069 is its power relay rating at 240 V AC and 5 A. This range can satisfy most requirements for driving externally controlled devices such as lights, fans, alarm systems, and various electronic devices in industrial automation, security, building and home automation applications. ADAM-4069 also supports the Modbus/RTU protocol and ADAM ASCII commands. Besides, it provides four form A channels and four form C channels.
Specifications
Part Number ADAM-4069-AE
Digital Input Channles -
Input Voltage -
Digital Output Channels 8-ch power relay
Power Dissipation -
General Isolation -
Watchdog Timer Yes (System & Comm.)

ADAM-4068

8-ch Relay Output Module with Modbus


Main Features

  • I/O type: 8 channels from C (NO/NC selectable)
  • Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A, DC: 30 V @ 2 A; 110 V @ 0.6 A
  • Switch Time: Relay on time (typical): 3 msec, relay off time (typical): 1 msec.
  • LED Indicators
  • Supports Modbus/RTU protocol
 
Introduction


The ADAM-4068 relay module is controlled remotely and store configuration data in EEPROM. The ADAM-4068 provides 4/8 channels, half being Form A and the rest being Form C. These modules are excellent for on/off control or low-power switching applications.
Specifications
Part Number ADAM-4068-BE
Digital Input Channles -
Input Voltage -
Digital Output Channels 8-ch relay
Power Dissipation -
General Isolation -
Watchdog Timer Yes (System & Comm.)

ADAM-4080

2-ch Counter/Frequency Module


Main Features

  • 2 digital outputs or high/low alarms
  • 2 independent 32-bit counters
  • 2500 VRMS isolation
  • Counter preset selection
  • Programmable digital filter
  • Programmable threshold for non-isolated input
 
Introduction


ADAM-4080/4080D Counter/frequency input module has two 32-bit counter input channels (counter 0 and counter 1)with built-in programmable timer for frequency measurement. These cost-effective modules let you monitor counter/frequency data as measurements are taken.
Specifications
Part Number ADAM-4080-DE
Digital Input Channles -
Input Voltage -
Digital Output Channels 2
Power Dissipation 300 mW for each channel
General Isolation 2,500 VRMS
Watchdog Timer Yes (System)

More Articles ...

  1. ADAM-2031Z
  2. ADAM-2051Z
  3. ADAM-2051PZ
  4. ADAM-2510Z
Page 93 of 156
  • Allen Bradley

Programmable Controllers

Allen Bradley control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology embodied in the scalable, multi-disciplined and information-enabled programmable automation controller (PAC). Allen Bradley safety-certified controllers support your SIL 2 and SIL 3 application needs. Allen Bradley offer multiple controller types and sizes to fit your specific needs.

largecontrollerfamily front1 smprod
Large Control Systems

Allen Bradley Large Control Systems fit your most demanding application needs. They offer modular architectures and a range of I/O and network options. These powerful control solutions deliver world-class capabilities for all disciplines, from process to safety to motion. Designed for distributed or supervisory control applications, Allen Bradley large programmable automation controllers (PACs) and programmable logic controllers (PLC) provide exceptional reliability and performance.

smallcontrollerfamily front1 smprod

Small Control Systems 

The perfect solution for your mid-range applications, Allen Bradley small controllers offer the features and flexibility you need without the overhead of larger systems. Choose from standard and safety-certified controllers in chassis-based, packaged and modular designs. Typical applications include complex machine control, batch processing and building automation.

micronanocontrollerfamily front1 smprod

Micro & Nano Control Systems

Allen Bradley micro nano PLCs provide economical solutions to basic control needs for your simple machines ranging from relay replacement to simple control timing and logic. Compact packaging, integrated I/O and communication, and ease of use make these controllers an ideal choice for applications such as conveyor automation, security systems, and building and parking lot lighting.