C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
+92-21-35070751
+92-300-5776703
The analog input/output module SM 534 offers 4 analog inputs and 2 analog outputs at a very small footprint and is therefore suited for use in the tightest spaces.
The narrow 25 mm module with Standard functionality uses push-in technology, the front connector as well as the components for shielding like power supply element, shield bracket, and shield terminal are included in the scope of delivery.
Like other 25 mm modules the SM534 can be used side by side with 35 mm modules in one station.
SM 534 AI/AQ 4xU/I/RTD/TC / 2xU/I ST
Standard analog input/output module with 4 inputs and 2 outputs
(resistance and resistance thermometer measuring limited to 2 channels)
4 inputs, measurement types: current, voltage, resistance,
resistance thermometers, thermocouples
resolution 16 bits
one potential group
accuracy +/-0.3%
common mode voltage 10 V
parameterizable diagnostics
hardware interrupts (two upper and lower limits)
calibration during execution time
2 outputs: current, voltage,
resolution 16 bits
accuracy +/-0.3%
one potential group
parameterizable diagnostics
parameterizable substitute values for the outputs
calibration during execution time
Article No.: 6ES7534-7QE00-0AB0
The failsafe S7-1500 /ET 200MP I/O modules allow the processing of safety related as well as standard programs. Their functional safety is certified in accordance with IEC 61508 (2nd Edition). They are designed for safety-related use up to SIL 3 according to IEC 62061 and PL e according to ISO 13849.
16 inputs (SIL3/Category 3/PLd) or 8 inputs (SIL3/Category 4/PLe)
Sensor evaluation 1v1 (1oo1) und 2v2 (1oo2)
Channel and module passivation
Four channel groups with four channels each
Internal short-circuit proof encoder supply per channel group
External sensor power supply possible
Supports FW update und I&M data
Article No.: 6ES7526-1BH00-0AB0
Eight outputs in two channel groups (SIL3/Category 4/PLe)
Settable (for each module): PM or PP switching
Output current 2A per output
Channel and module passivation
Supports FW update und I&M data
Article No.: 6ES7526-2BF00-0AB0
Interfaces for communication via PROFINET and in part PROFIBUS DP as well are already integrated in the S7-1500 CPUs. Communication modules increase the communication capabilities of the
S7-1500 through additional communication functions or more interfaces.
Communication modules enhance flexibility and performance of automation solutions using the SIMATIC S7-1500/ET 200MP. Additional interfaces enable realization of complex automation structures or process optimization through connection to the enterprise management level.
Within a centralized architecture with SIMATIC S7-1500 as well as in decentralized architecture with SIMATIC ET 200MP PtP Communication Moules are employed. Serial interfaces can be used to connect e.g. barcode or RFID readers for non-contact data transmission.
Four communication modules are available for connecting automation components via serial interfaces.
With high-performance communication functions and integrated security functionality, the CP 1543-1 communication module opens up additional areas of use for the S7-1500.
Secure connection to Industrial Ethernet via Stateful Inspection Firewall in addition to CPU password protection
Configurable access rights for local and remote access
Simple alarms via email and transmission of production data to control computer via FTP(S) file transfer
Flexible integration in IPv6-based infrastructure
Possibility of segmentation for constructing identical machines with the same IP addresses
Overall project planning – including security functionality – integrated in TIA portal
The CM 1542-5 supports the functions PROFIBUS DP-Master and PROFIBUS DP-Slave according to international standard IEC 61158/61784. This module enables connection of PROFIBUS devices to S7-1500 controllers that do not have a PROFIBUS interface on the CPU
Simple expansion of the system using additional PROFIBUS strands
Separation of PROFIBUS subnets for separate automation tasks possible
Enhanced system performance by relieving the S7-1500 CPU of communication tasks
Connection of PROFIBUS slaves from external vendors
Cost-effective module replacement through network separation in the event of a failure
Project planning integrated in TIA Portal V12
Technology modules offer hardware-level signal processing for rapid counting, measurement and position registration for a variety of transducers.
Technological functions such as motion control and high speed counter are already integrated in the SIMATIC S7-1500 CPUs and plannable via STEP 7 (TIA Portal)
Rapid signal preprocessing for counting and measuring tasks in the high-speed range
Position detection for incremental and SSI absolute value encoders
Easy to use parameter assignment interface already integrated in SIMATIC STEP 7 (TIA Portal)
Efficient programming using technology objects
Fast reactions due to different hardware interrupts for internal/external events and count values
Reaction of modules to "CPU stop" can be configured
Can be operated centrally in the S7-1500 and distributed in the ET 200MP I/O system
The following Technology Modules for ET 200MP or S7-1500 are available:
The technology module TM Count 2x24V for 24 Volt input signals is a universal counter module for counting and measuring tasks as well as position input with incremental encoders. The module offers measuring functions for velocity and frequency as well as signal acquisition up to 200 kilohertz and is suitable for sophisticated tasks, for example, in the packaging, food or paper industry.
Supported encoder/signal types:
- 24 V incremental encoder with and without signal N,
- 24 V pulse encoder with direction signal,
- 24 V pulse encoder without direction signal,
- 24 V pulse encoder for forward & backward pulses
Max. counting frequency 200 kHz (800 kHz with quadruple evaluation)
Integrated DI: 3 digital inputs for control of the counting process, for saving or setting the counter values
Integrated DQ: 2 digital outputs for fast reaction depending of counter reading or measured value
Counting functions: Settable counting range up to +/- 2^31 bits
Measurement functions: Flexible adjustment of measurement time and selectable output unit
Diagnostic interrupt: For example in case of errors at the load voltage or encoder
Configurable hardware interrupt
Supported system functions: Isochronous mode, firmware update, identification data I&M
Article No: 6ES7550-1AA00-0AB0
The ET 200MP TM PosInput 2 counting and position detection module offers two counting channel for differential input signals according to RS422 up to 1 MHz, as well as position detection with the aid of SSI absolute value encoders.
The connection of 5V TTL signals is also possible for the counting function.
Connection of SSI absolute value encoders
- Frame lengths from 10 to 40 bits
- Position values up to 31 bits
- Forwarding of encoder status information
Counting of different signal shapes of the count signal
- 1-track count signal, e.g. for counting products or detecting flow or energy volume
- 2 separate count signals for forwards and backwards,
e.g. for detecting the content of a container with inflow and outflow
- 1 count signal with an additional direction signal
- 2 tracks with 90° phase offset, optionally with zero track for detecting positions with incremental encoders
Measuring functions for Measuring frequency, period length and speed in selectable unit
2 digital inputs per channel
- for fast control of the count process by means of a HW gate
- for saving the count value
- for setting a count value due to an event
2 digital outputs per channel for high-speed responses
- depending on the counter value or position value
- depending on the measured value
Integrated 24 V power supply for the encoders
Position detection for Motion Control in S7-1500 from Step 7 (TIA Portal V13)
The functionality and operator interface are compatible with the ET 200SP TM PosInput 1 module and allow simple switching between the I/O families S7-1500/ET200 MP and ET 200SP.
Typical applications:
Detection of positions
Detection of speeds
Detection of product lengths
Dosing of fill quantities
Application of adhesive beads
Measurement of workpieces
Article No. 6ES7551-1AB00-0AB0
The time-based IO module ET 200MP TM Timer DIDQ 16x24V fulfills the highest demands for precision and speed, independent of the controller performance and the fieldbus.
Time-based IO assures that the signals are read-in and output precisely - to within 1 microsecond!
Up to 8 digital inputs with the following functions::
- Up to 8 digital inputs with the following functions:
- Up to 2 time stamps per cycle
- 32x oversampling
- Counting function up to 50 kHz
- Incremental encoder acquisition with 2 phase-shifted traces
Up to 16 digital outputs with the following functions:
- Up to 2 time stamps per cycle
- 32 x oversampling
- Pulse width modulated output
Various combinations of digital inputs and outputs can be configured:
- 0 digital inputs /16 digital outputs (for cam applications with many outputs)
- 3 digital inputs /13 digital outputs (for configurations similar to FM 352)
- 4 digital inputs /12 digital outputs (for flexible mixed operation)
- 8 digital inputs / 8 digital outputs (for probes and incremental encoders)
Typical applications:
Exact definition of reaction times, independent of application cycle
Cam controller
Probes
Length measurement
Dosing of fluid quantities
Time measurement
Article No.:6ES7552-1AA00-0AB0
The two technology modules are the perfect solution for the seamless integration of standard weighing applications like platform or hopper scales in SIMATIC S7-1500.
The technology module is available in single and dualchannel variants. SIWAREX WP521 ST is the single-channel option for one scale while the dual-channel SIWAREX WP522 ST enables two separate scales to be integrated into the automation system - with same space requirements.
Integrated in SIMATIC S7-1500 all advantages of the automation system can be used. The free “ready-for-use“ application helps to create fast and easily customer and application specific solutions
|
Feature | |
|---|---|
|
Integration in automation systems |
SIMATIC S7-1500/ET 200MP |
|
Communication interfaces (on board) |
SIMATIC S7-1500 system bus |
|
Internal resolution |
Up to +/- 4 million parts |
|
Measuring rate |
100/120 Hz |
|
Typical applications |
Basic scales, e.g. platform and hopper scales |
|
Article No: |
SIWAREX WP521 ST: 7MH4980-1AA01 |
CMS-6 is a specialized supervisory control product with advanced features and functions designed to provide energy efficient optimized narrow pressure and priority management control of up to 6 air / gas compressors operating in a common compressed air / gas system
C&M Engineering has designed a reliable and robust compressor management system that is available as a customized product specifically configured according to your pressure demand.
