-
Address
C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
-
Call us on
+92-21-35070751
+92-300-5776703
-
- You are here:
-
Home
-
Products
-
Mitsubishi
- Uncategorised
S7-300 Standard CPUs
SIMATIC S7-300 CPU 312
SIMATIC S7-300, CPU 312 Central processing unit with MPI, Integr. power supply 24 V DC, Work memory 32 KB, Micro Memory Card required
Entry CPU for small-scale applications with moderate requirements on the processing speed.
-
MPI-interface onboard
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 314
SIMATIC S7-300, CPU 314 Central processing unit with MPI, Integr. power supply 24 V DC, work memory 128 KB, Micro Memory Card required
CPU for installations with medium requirements on program scope.
-
High processing performance in binary and floating-point arithmetic
-
MPI-interface onboard
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 315-2 DP
SIMATIC S7-300, CPU 315-2DP Central processing unit with MPI Integr. power supply 24 V DC Work memory 256 KB 2nd interface DP master/slave Micro Memory Card required
The CPU with medium to large program memory and quantity framework for the use, if required, of SIMATIC Engineering Tools.
-
High processing performance in binary and floating-point arithmetic
-
PROPROFIBUS DP master/slave interface
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 315-2 PN/DP
SIMATIC S7-300 CPU 315-2 PN/DP, Central processing unit with 384 KB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
The CPU with a medium program memory and quantity framework
-
40 mm width
-
High processing performance in binary and floating-point arithmetic
-
Used as a central controller on production lines with central and distributed I/O
-
Integral PROFINET interface with 2 Ports for line topologies
-
Combined MPI / PROFIBUS DP-master/slave interface
-
Component based Automation (CBA) on PROFINET
-
PROFINET-proxy for intelligent devices on PROFIBUS DP in Component Based Automation (CBA)
-
PROFINET I/O Controller for operating distributed I/O on PROFINET
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 317- 2 DP
SIMATIC S7-300, CPU 317-2 DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP master/slave Micro Memory Card required
The CPU with a large program memory and quantity framework for demanding requirements
-
For multisector automation tasks in the construction of series machines, special machines and plants
-
Used as a central controller on production lines with central and distributed I/O
-
High processing performance in binary and floating-point arithmetic
-
PROFIBUS DP master/slave interface
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 317-2 PN/DP
SIMATIC S7-300 CPU 317-2 PN/DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
The CPU with a large program memory and quantity framework for demanding requirements
-
40 mm width
-
Distributed intelligence in Component Based Automation (CBA) on PROFINET
-
PROFINET proxy for intelligent devices on PROFIBUS DP in Component Based Automation (CBA)
-
PROFINET I/O controller for operating distributed I/O on PROFINET
-
2 PROFINET Ports for line topologies
-
For multisector automation tasks in the construction of series machines, special machines and plants
-
Used as a central controller on production lines with central and distributed I/O
-
For extensive I/O configurations
-
For setting up distributed I/O structures
-
High processing performance in binary and floating-point arithmetic
-
Combined MPI/PROFIBUS DP-master/slave interface
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
SIMATIC S7-300 CPU 318-3 PN/DP
SIMATIC S7-300 CPU 318-3 PN/DP, Central processing unit with 2 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP master/slave 3rd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
The CPU with high command processing performance, large program memory and quantity framework for demanding applications
-
Integral PROFINET interface with 2 Ports for line topologies
-
For cross-sector automation tasks in series machine, special machine and plant construction
-
Used as central controller in production lines with central and distributed I/O on PROFIBUS and PROFINET
-
Distributed intelligence in Component Based Automation (CBA) on PROFINET
-
PROFINET proxy for intelligent devices on PROFIBUS DP in Component Based Automation (CBA)
-
Isochronous mode on PROFIBUS
-
Comprehensive integrated system diagnosis
-
Supports ideally the insert of SIMATIC Engineering Tools
Technical Data
S7-300 CPUs
CPUs for every application
Description
A graded CPU range with a wide performance range is available for configuring the controller.
The product range comprises 7 standard CPUs,
7 compact CPUs, 5 fail-safe CPUs and 3 technology CPUs.
The CPUs are available from a width of only 40 mm
SIMATIC S7-300 is within Totally Integrated Automation the most sold Controller.
Range of application
-
In the first instance SIMATIC S7-300 is used for innovative system solutions in manufacturing technology, especially for automobile industry, mechanical engineering in general and especially for special machine building and serial production of machines (OEM), at plastics processing, packaging industry, food and beverage industry and process engineering
-
As an all-purpose automation system is S7-300 the ideal solution for applications, which need a flexible concept for central as well as local configuration
-
For applications, which require a especial robustness because of surrounding conditions, we have the SIPLUS extreme devices
Particularly in the finishing technique the S7-300 is used in the following industries:
-
Automobile industry
-
General mechanical engineering
-
Building of special machines
-
Series mechanical engineering, OEM
-
Plastics processing
-
Packaging industry
-
Food and Beverage industry
-
Process engineering
-
Fast counting/fairs with direct access on the hardware counters
-
Simply positioning with direct control the MICROMASTER frequency static frequency changers
-
PID-Regulation with integrated functional module
Benefits
-
Thanks to their high processing speed, the CPUs enable short machine cycle times.
-
The S7-300's range of CPUs provides the right solution for every application, and customers only pay for the performance actually required for a specific task
-
The S7-300 can be set up in a modular configuration without the need for slot rules for I/O modules
-
There is a wide range of modules available both for the centralized and the distributed configuration with ET 200M.
-
Integral PROFINET interfaces enable simple networking of the controllers, and simple data exchange with the operations management level
-
The narrow module width results in a compact controller design or a small control cabinet.
-
The ability to integrate powerful CPUs with Industrial Ethernet/PROFINET interface, integrated technological functions, or fail-safe designs make additional investments unnecessary.
Design and function
Design
The S7-300 enables space-saving and modular configurations. In addition to the modules, only a DIN rail is required for hooking in the modules and screwing them into place.
This results in a rugged and EMC-compatible design.
The build-as-you-go backplane bus can be expanded by simply plugging in additional modules and bus connectors. The varied range of the S7-300 can also be used for centra lexpansions or the construction of distributed structures with ET 200M; thereby producing very cost-effective spare parts handling.
Expansion options
If the automation task requires more than 8 modules, the central controller (CC) of the S7-300 can be expanded using expansion units (EUs) Up to 32 modules can be used in the centralrack and up to 8 per expansion unit. Interface modules(IMs) handle communication between the individual racksautonomously. In the case of plants covering wide areas, CCs/EUs can also be installed at greater distances from eachother (up to 10 m).
In a single-tiered configuration, this results in a maximumconfiguration of 256 I/O, and in multi-tiered configurations upto 1024 I/O. In distributed configurations with PROFIBUS DP,65536 I/O connections are possible (up to 125 stations, suchas ET 200M via IM 153). The slots are freely addressable, thatis, there are no slot rules.
The extensive range of S7-300 modules is also used in distributedautomation solutions.
The ET 200M I/O system that hasthe same construction as the S7-300 can be connected via Interface modules not only to PROFIBUS but also to PROFINET.
Technical data
CPU Range
Components for SIMATIC S7-300
S7-300 Compact-CPUs
S7-300 CPUs module overview
Description
Compact CPUs with widths of 80 or 120 mm also offer integralI/O and integral technological functions. This onboard I/O (digital/analog) and the technological functions save additionalinvestments in other modules.
The S7-300 Compact-CPUs are especially suited for tasks, where fast counting/measuring with direct access to the hardware is required. They enable easy positioning with direct controlling of the MICROMASTER-frequency-conventer and include a PID-Control with an integrated function block.
SIMATIC S7-300 CPU 312C
For small applications with high requirements in terms of processing power
-
MPI-Schnittstelle onboard
-
Technological functions:
- Counting
- Frequency measurement
- Pulse width modulation
- Pulse generator -
10 digital inputs
-
6 digital outputs
SIMATIC S7-300 CPU 313C
SIMATIC S7-300, CPU 313C, Compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 3 high-speed counters (30 kHz), Integr. power supply 24 V DC, work memory 128 KB, Front connector (2x 40-pole) and Micro Memory Card required
CPU for installations with high requirements in terms of processing power and response time.
-
MPI interface onboard
-
Technological functions:
- Counting
- Closed loop control
- Frequency measurement
- Pulse width modulation
- Pulse generator -
24 digital inputs
-
16 digital outputs
-
4 analog inputs
-
2 analog outputs
SIMATIC S7-300, CPU 313C-2 PTP Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated interface RS485, Integr. power supply 24 V DC, work memory 128 KB, Front connector (1x 40-pole) and Micro Memory Card required
CPU for installations with high requirements in terms of processing power and response time.
-
MPI- interface onboard
-
Point to point link interface
-
Technological functions:
- Counting
- Closed loop control
- Frequency measurement
- Pulse width modulation
- Pulse generator -
16 digital inputs
-
16 digital outputs
SIMATIC S7-300 CPU 313C-2 DP
SIMATIC S7-300, CPU 313C-2 DP Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 128 KB, Front connector (1x 40-pole) and Micro Memory Card required
CPU for installations with high requirements in terms of processing power and response time.
-
MPI interface onboard
-
PROFIBUS DP master/slave interface
-
Technological functions:
- Counting
- Closed loop control
- Frequency measurement
- Pulse width modulation
- Pulse generator -
16 digital inputs
-
16 digital outputs
SIMATIC S7-300 CPU 314C-2 PtP
SIMATIC S7-300, CPU 314C-2 PTP Compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), integrated interface RS485, Integr. power supply 24 V DC, work memory 192 KB, Front connector (2x 40-pole) and Micro Memory Card required
CPU for installations with high requirements in terms of processing power and response time.
-
MPI interface onboard
-
Point to point link interface
-
Technological functions:
- Counting
- Closed loop control
- Frequency measurement
- Pulse width modulation
- Pulse generator
- Positioning -
24 digital inputs
-
16 digital outputs
-
4 analog inputs
-
2 analoga outputs
SIMATIC S7-300 CPU 314C-2 DP
SIPLUS S7-300 CPU 314 -25...+60 °C with conformal coating according to EN 50155 based on 6ES7314-1AG14-0AB0 . Central processing unit with MPI, Integr. power supply 24 V DC, work memory 128 KB, Micro Memory Card required
CPU for installations with high requirements in terms of processing power and response time
-
MPI interface onboard
-
PROFIBUS DP master/slave interface
-
Technological functions:
- Counting
- Closed loop control
- Frequency measurement
- Pulse width modulation
- Pulse generator
- Positioning -
24 digital inputs
-
16 digital outputs
-
4 analog inputs
-
2 analog outputs
SIMATIC S7-300 CPU 314C-2 PN/DP
SIMATIC S7-300, CPU 314C-2PN/DP Compact CPU with 192 KB work memory, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Integr. power supply 24 V DC, Front connector (2x 40-pole) and Micro Memory Card required
CPU for machines with high demands of computing power and reaction rate
-
combined MPI-PROFIBUS DP-interface onboard
-
2 PROFINET Ports for line structures
-
Technology functions:
- Counting
- Controlling
- Detecting frequenzes
- Pulse width modulation
- Pulse generator
- Positioning -
24 digital inputs
-
16 digital outputs
-
4 analog inputs
-
2 analog outputs
