• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

PCL-746+

4-port RS-232/422/485 Communication Card


Main Features

  • Two independent RS-422/485 serial ports
  • Provides 3000 VDC isolation
  • Provides 2500 VDC surge protection
  • 16C550 UARTs with on-chip 16-byte FIFO
  • Transmission speeds up to 921.6 kbps
  • I/O address and interrupt selectable
  • Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
  • Supports 2 wire or 4 wire operation
  • Supports Tx, Rx, RTS, and CTS signals
  • Automatic RS-485 data flow control or RTS control
  • Termination resistors jumper enable/disable
  • Supports standard DOS COM1, COM2, COM3, and COM4
  • Supports Windows® 98/2000/XP, Linux®
  • Powerful and easy-to-use utility (ICOM Tools)
 
Introduction

The PCL-745 series card provides two RS-422/485 serial ports.Each port utilizes a 16C550 UART with an on-chip 16-byte FIFO buffer for reliable, high-speed serial I/O. The UART buffer divides data into 16-byte packets before sending them onto the bus. This drastically reduces the CPU load and avoids data loss due to failure to respond to the interrupt request in time. The UART is especially useful for high speed serial I/O under Windows. The PCL-745S card differs from the PCL-743S card in that the former uses on-board optical isolators to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments. To further increase reliability, the PCL-745S offers surge protection technology, protecting your system from abrupt high voltage surges (up to 2500 V) such as those caused by lightning. 
Specifications
Part Number PCL-745S-BE PCL-746+-BE
Communication<br>Interfaces CAN - -
Current Loop - -
RS-232 V V
RS-422 V V
RS-485 V V
Display Ports 4 4
Network Cable Connector Type DB9 Male DB25 Male
Protection Isolation - -
Surge - -

 

 

  • Omron

Omron

CP1E

Compact and cost-effective

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept. Lean Automation fits into stand-alone machines or modules within a larger machine. Its merit lies in its simplicity, compactness and economically attractive solutions.  

  • 6 high-speed counter inputs and 2 high speed pulse outputs
  • Instruction set upwards compatible with CP1H, CJ1, and CS1
  • Optional RS232C and RS-422/485 serial ports for N-type application model
  • Simple motion functions including Modbus-RTU simple master
          Features  | Lineup |  Specifications