• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

Strain Gauge Isolated Transmitter ADAM-4016

1-ch Analog Input/Output Module


Main Features

  • Strain Gauge Input
  • Watchdog Timer
 
Introduction


Strain gauge input module uses a microprocessor-controlled integrating A/D converter to convert sensor voltage or current signals into digital data for load cell and stress measurement. The digital data is then translated into either engineering units, twos complement hexadecimal format or percent-age of full-scale range (FSR)according to the module 's configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The strain gauge input module offers signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 VDC .
Specifications
Part Number ADAM-4016-A2E
Analog Input Burn-out 
Detection		 -
Channel 
Independent 
Configuration		 -
Current Input ±20 mA
Direct Sensor 
Input		 -
Voltage Input ±15 mV 
±50 mV 
±100 Mv 
±500 mV
Analog Output Current Output 30 mA
Voltage Output 0 - 10 V
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 N/A
Other Isolation 3000 VDC

ADAM-4017

8-ch Analog Input Module


Main Features

  • Channels: Six differential, two single-ended
  • Input type: mV, V, mA
  • Sampling rate: 10 samples/sec. (total)
 
Introduction


The ADAM-4017 is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. This module is an extremely cost-effective solution for industrial measurement and monitoring applications. Its opto-isolated inputs provide 3000 VDC of isolation between the analog input and the module, protecting the module and peripherals from damage due to high input-line voltages. ADAM-4017 offers signal conditioning, A/D conversion, ranging and RS-485 digital communication functions. The module protects your equipment from ground loops and power surges by providing optoisolation of A/D input and transformer based isolation up to 3000 VDC. The ADAM-4017 uses a 16-bit microprocessor-controlled sigma-delta A/D converter to convert sensor voltage or current into digital data. The digital data is then translated into engineering units. When prompted by the host computer, the module sends the data to the host through a standard RS-485 interface.
Specifications
Part Number ADAM-4017-D2E
Analog Input Burn-out 
Detection		 -
Channel 
Independent 
Configuration		 Yes
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 -
Voltage Input 0 ~ 150 mV, 0 ~ 500 mV, 
0 ~ 1V, 0 ~5 V, 0 ~ 10 V,
Analog Output Current Output -
Voltage Output -
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

ADAM-4017+

8-ch Analog Input Module with Modbus


Main Features

  • 16-bit resolution
  • Eight different inputs
  • Software configurable for mV, V or mA inputs
  • 3000 Vdc isolation
  • Supports Modbus/RTU Protocol
  • Supports 4~20mA
 
Introduction


The ADAM-4017+ is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. These modules are an extremely cost-effective solution for industrial measurement and monitoring applications. 3000 VDC optical isolation between the analog input and the modules protects the modules and peripherals from damages caused by high input voltages.
Specifications
Part Number ADAM-4017+-CE
Analog Input Burn-out 
Detection		 N/A
Channel 
Independent 
Configuration		 Yes
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 N/A
Voltage Input 0 ~ 150 mV, 0 ~ 500 mV, 
0 ~ 1V, 0 ~5 V, 0 ~ 10 V,
Analog Output Current Output N/A
Voltage Output N/A
Digital I/O Digital Input 
Channel		 N/A
Digital Ouput 
Channel		 N/A
Other Isolation 3000 VDC

ADAM-4018

8-ch Thermocouple Input Module


Main Features

  • Channels: Six differential, two single-ended
  • Input type: Thermocouple, mV, V, mA
  • Fault and overvoltage protection
  • Watchdog Timer
 
Introduction


The ADAM-4017/4018 is a 16-bit,8-channel analog input module that provides programmable input ranges on all channels. This module is an extremely cost-effective solution for industrial measurement and monitoring applications. Its opto-isolated inputs provide 3000 V DC of isolation between the analog input and the module, protecting the module and peripherals from damage due to high input voltages. ADAM-4017/4018 offers signal conditioning, A/D conversion, ranging and RS-485 digital communication functions. The module protects your equipment from ground loops and power surges by providing opto-isolation of A/D input and transformer based isolation up to 3000 V DC . The ADAM-4017/4018 uses a 16-bit microprocessor-controlled sigma-delta A/D converter to convert sensor voltage or current into digital data. The digital data is then translated into engineering units. When prompted by the host computer, the module sends the data to the host through a standard RS-485 interface.
Specifications
Part Number ADAM-4018-D2E
Analog Input Burn-out 
Detection		 N/A
Channel 
Independent 
Configuration		 -
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 J, K, T, E, R , S, B 
Thermocouple
Voltage Input -
Analog Output Current Output -
Voltage Output -
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

ADAM-4018+

8-ch Thermocouple Input Module with Modbus


Main Features

  • 16-bit resolution
  • Eight different inputs
  • Software configurable for T/C, low level voltage or mA inputs
  • Wiring burned-out detectable function
  • 3000 Vdc isolation
  • Supports Modbus/RTU Protocol
  • Supports 4~20mA
 
Introduction


The ADAM-4018+ is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. These modules are an extremely cost-effective solution for industrial measurement and monitoring applications. 3000 VDC optical isolation between the analog input and the modules protects the modules and peripherals from damages caused by high input voltages.
Specifications
Part Number ADAM-4018+-BE
Analog Input Burn-out 
Detection		 Yes
Channel 
Independent 
Configuration		 -
Current Input 4 - 20 mA 
±20 mA
Direct Sensor 
Input		 J, K, T, E, R , S, B 
Thermocouple
Voltage Input -
Analog Output Current Output -
Voltage Output -
Digital I/O Digital Input 
Channel		 -
Digital Ouput 
Channel		 -
Other Isolation 3000 VDC

More Articles ...

  1. ADAM-4019+
  2. ADAM-4021
Page 90 of 156
  • Omron

Omron

CP1E

Compact and cost-effective

The CP1E delivers an exceptional solution for automating small and compact machines, and is part of Omron’s Lean Automation concept. Lean Automation fits into stand-alone machines or modules within a larger machine. Its merit lies in its simplicity, compactness and economically attractive solutions.  

  • 6 high-speed counter inputs and 2 high speed pulse outputs
  • Instruction set upwards compatible with CP1H, CJ1, and CS1
  • Optional RS232C and RS-422/485 serial ports for N-type application model
  • Simple motion functions including Modbus-RTU simple master
          Features  | Lineup |  Specifications