Siemens

Address

C-188, Sector 31-D, P&T Society,

Korangi Industrial Area,

Karachi-74900,

Pakistan
Call us on

+92-21-35070751

+92-300-5776703
Mail us @

info@pakplc.com

ADAM-4520

Isolated RS-232 to RS-422/485 Converter
		Main Features Automatic RS-485 data flow control 3000 VDC isolation protection Surge protection RS-485 data line Transmission speed up to 115.2 Kbps Networking up to 1200 meters (4000 feet) Reserved space for termination resistors Power and data flow indicator for troubleshooting Power requirement: +10 to +30 VDC Mounts easily on a DIN-rail, panel or piggyback

Introduction
Most industrial computer systems come with standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals. The ADAM-4520/4522 converter lets you take advantage of RS-422 and RS-485 on systems originally equipped with RS-232. It transparently converts RS-232 signals into isolated RS-422 or RS-485 signals. You do not need to change your PC's hardware or your software. The ADAM-4520 lets you easily build an industrial grade, long distance communication system with standard PC hardware. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of connected nodes by 32.
Specifications
Part Number		ADAM-4520-D2E
General	Built-in I/O	-
	Comm. Distance	Serial: 1.2 km
	Comm. Protocol	-
	Comm. Speed	Serial: From 1,200 to 115.2 k
	Data Flow Control	-
	Interface Connectors	RS-232: termale DB9 RS-422/485: plug-in screw terminal
	Isolation Voltage	3000 VDC
	Network	RS-232 to RS-422/485
	Watchdog Timer	-

ADAM-4520I

Robust RS-232 to RS-422/485 Converter
		Main Features Wide Operating Temperature: -40 ~ 85° C Automatic RS-485 data flow control 3000 VDC isolation protection Surge protection RS-485 data line Transmission speed up to 115.2 Kbps Networking up to 1200 meters (4000 feet) Reserved space for termination resistors Power and data flow indicator for troubleshooting Power requirement: +10 to +48 VDC Mounts easily on a DIN-rail, panel or piggyback

Introduction
The ADAM-4520I (RS-232 to RS-422/485 converter) is designed more rugged than previous models which have wider operating and storage temperatures, can accept a wider power input, and have excellent anti-noise design. Moreover,it provide ssignal isolation (3,000VDC) protection and power surge (50V) protection. These industrial-grade features ensure robust and reliable operation in harsh environment applications.
Specifications
Part Number		ADAM-4520I-AE
General	Built-in I/O	-
	Comm. Distance	Serial: 1.2 km
	Comm. Protocol	-
	Comm. Speed	Serial: From 1,200 to 115.2 k
	Data Flow Control	-
	Interface Connectors	RS-232: termale DB9 RS-422/485: plug-in screw terminal
	Isolation Voltage	3000 VDC
	Network	RS-232 to RS-422/485
	Watchdog Timer	-

ADAM-4521

Addressable RS-422/485 to RS-232 Converter
		Main Features Automatic RS-485 data flow control 1000 VDC isolation protection Surge protection RS-485 data line Transmission speed up to 115.2 Kbps Networking up to 1200 meters (4000 feet) Reserved space for termination resistors Power and data flow indicator for troubleshooting Power requirement: +10 to +30 VDC Mounts easily on a DIN-rail, panel or piggyback RS-232 and RS-485 can be set to different baud rates Watchdog timer function Software confi gurable to either addressable or non-addressable mode All communication setups stored in EEPROM

Introduction
The ADAM-4521 is an intelligent RS-422/485 to RS-232 converter specifically designed to connect RS-422/485 devices to an RS-232 network. RS-232 is the most common transmission standard. Although widely available on most computer systems, measurement equipment, PLCs, and industrial devices, its transmission speed, communication distance, and especially networking capability are limited due to unbalanced transmission. The ADAM-4521 addressable converter solves this problem and lets you easily build up an RS-485 network with your RS-232 devices by assigning each one an address for easier communication.
Specifications
Part Number		ADAM-4521-AE
General	Built-in I/O	-
	Comm. Distance	Serial: 1.2 km
	Comm. Protocol	-
	Comm. Speed	Serial: From 1,200 to 115.2 k
	Data Flow Control	Yes
	Interface Connectors	RS-232: termale DB9 RS-422/485: plug-in screw terminal
	Isolation Voltage	1000 VDC
	Network	RS-232 to RS-422/485
	Watchdog Timer	Yes

ADAM-4561

1-port Isolated USB to RS-232/422/485 Converter
		Main Features Full compliance with USB V1.1 specifications RS-232/422/485 port supported Transmission speed up to 115.2 kbps Isolation protection 3000 VDC provided Automatic RS-485 data flow control No external power supply necessary; the hub derives its power from the USB port Plug & Play installation No additional IRQs or I/O ports required Hot swap function supported

Introduction
ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. Thismakes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.
Specifications
Part Number		ADAM-4561-BE
General	Serial	Screw Tterminal
	USB	Type B
Display	Interface	USB 1.1
Protection	Isolation	3000 VDC
	Surge	3000 VDC
Serial	Ports	1
	Type	RS-232/422/485
Software	Baud Rate	50 ~ 115.2 Kbps
	Driver	Windows 2000/2003/XP/Vista/7

More Articles ...

Page 129 of 195

Siemens

Siemens offers a wide range of Programmable Logic Controllers (PLC). S7-1200 PLC is suitable for small individual machine applications, whereas S7-300 PLC was previously targeted towards medium to high demand applications. However since it is nearing its end-of-lifecycle, S7-300/400 PLC series have been supplemented with the innovative S7-1500 PLC series. A new range of HMI panels are also available in all sizes for suitable operator control/monitoring. S7-1200 and S7-1500 are both part of Totally Integrated Automation (TIA) platform and programmable via Siemens TIA Portal software.

Simatic 300

SIMATIC S7-300

Simatic 1200

SIMATIC S7-1200

Simatic 1500

SIMATIC S7-1500

s7 400

SIMATIC S7-400

Simatic HMI

SIMATIC HMI