Siemens

RS-232/422/485 to Fiber Optic Converters

Fiber optic transmission offers the benefits of wide bandwidth, immunity to EMI/RFI interference, and secured data transmission. The fiber-optic converter is used as an RS-232/422/485 point-to-point or point-to-multipoint connection for transmitting and converting full/half-duplex signals and their equivalents within a fiber optics environment. Fiber optics is the perfect solution for applications where the transmission medium must be protected from electrical exposure, lightning, atmospheric conditions or chemical corrosion.

Product
Model Number		Description
ADAM-4541		Multi-mode Fiber Optic to RS-232/422/485 Converter

ADAM-4542+		Single-mode Fiber Optic to RS-232/422/485 Converter

Remote I/O Modules

Advantech is a global leader in data acquisition I/O module design and manufacturing, offering complete stand-alone data acquisition modules which are broadly used in industrial applications, such as facility monitoring, environment monitoring, and industrial process control. Advantech distributed I/O modules are categorized into two families, Ethernet I/O (ADAM-6000 series) and RS-485 I/O (ADAM-4000 series), which are subdivided into Analog I/O and Digital I/O modules with some of them supporting modbus communication protocol.

Product Catagories
	RS-485 I/O Modules: ADAM-4000 ADAM-4000 modules are the perfect choice for establishing a cost-effective remote I/O system. Customers can benefit from ADAM-4000 modules through its simple wiring --- using only two wires to communicate with their controller or other RS-485 devices. ADAM-4000 modules use the EIA RS-485 communication protocol; the industry's most widely used bi-directional, balanced transmission line suitable for industrial environments.
	Ethernet I/O Modules: ADAM-6000 In the past, integrating automation and enterprise systems required changing the entire architecture of the control system. Nowadays, Advantech ADAM-6000 accomplishes this integration easily through the latest internet technology, so that it can remotely monitor the device status more flexibly. Advantech's ADAM-6000 modules are empowered by Peer-to-Peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. With Advantech's P2P and GCL technology, no additional controllers or programming is needed. With the easy-to-use and intuitive graphic utility, system configurations can be done in an extremely short time. The members of ADAM-6000 series include Communication Controllers, Analog Input/Output Modules and Digital Input/Output Modules.
	Wireless I/O Modules: ADAM-2000 Integrated with wireless functionality, power management, and I/O technologies, the ADAM-2000 series are revolutionary products for data acquisition. Based on the IEEE 802.15.4 wireless standard, networks can be easily deployed and extended. Moreover, low rates and low duty cycles make it possible for them to act as standalone devices, providing cost-effective distributed I/O solutions. With the popular industrial communication protocol Modbus RTU, ADAM-2000 series products can be adapted into any SCADA or industrial system with Advantech products, such as IPCs, ADAM, EKI, or WebAccess.

Product Catagories

RS-485 I/O Modules: ADAM-4000

ADAM-4000 modules are the perfect choice for establishing a cost-effective remote I/O system. Customers can benefit from ADAM-4000 modules through its simple wiring --- using only two wires to communicate with their controller or other RS-485 devices. ADAM-4000 modules use the EIA RS-485 communication protocol; the industry's most widely used bi-directional, balanced transmission line suitable for industrial environments.

Ethernet I/O Modules: ADAM-6000

In the past, integrating automation and enterprise systems required changing the entire architecture of the control system. Nowadays, Advantech ADAM-6000 accomplishes this integration easily through the latest internet technology, so that it can remotely monitor the device status more flexibly. Advantech's ADAM-6000 modules are empowered by Peer-to-Peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. With Advantech's P2P and GCL technology, no additional controllers or programming is needed. With the easy-to-use and intuitive graphic utility, system configurations can be done in an extremely short time. The members of ADAM-6000 series include Communication Controllers, Analog Input/Output Modules and Digital Input/Output Modules.

Wireless I/O Modules: ADAM-2000

Integrated with wireless functionality, power management, and I/O technologies, the ADAM-2000 series are revolutionary products for data acquisition. Based on the IEEE 802.15.4 wireless standard, networks can be easily deployed and extended. Moreover, low rates and low duty cycles make it possible for them to act as standalone devices, providing cost-effective distributed I/O solutions. With the popular industrial communication protocol Modbus RTU, ADAM-2000 series products can be adapted into any SCADA or industrial system with Advantech products, such as IPCs, ADAM, EKI, or WebAccess.

Building Automation Systems

Advantech Building Automation Systems offer direct digital controllers, I/O expansion modules, WebView, and WebLink for energy management and facility monitoring and control systems(HVAC, lighting controls, etc.). Advantech BAS offers friendly web-based user interfaces, remote access and management capabilities, and open systems technologies, including open database management and BAS standard protocols (Modbus, BACnet, and LonWorks).

Product Catagories
	WebAccess HMI/SCADA Software Advantech's Industrial Automation Group has announced the launch of WebAccess, a browser-based software package for Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) devices. Advantech WebAccess provides remote control and management allowing users to easily view, control, and configure automation equipment in manufacturing facilities, industrial process plants, electric power stations, and building automation systems. In addition, users can easily engineer and develop systems because all the features found in conventional HMI and SCADA software packages are available in an ordinary web browser.
	BACnet Remote I/O Modules The BAS-3000BC series are BACNet MS/TP remote I/O modules with RS-485 inter¬faces that can be expanded as remote I/O modules for 3rd party BACNet MS/TP DDC controllers. BAS-3000BC series provides I/O models with predefined BACNet objects and services listed as PICS to ensure seamless communication each other. Advantech's Domain Focused Configuration Tool is a BACnet Utility specially designed for Building Automation, and is a powerful graphical configuration tool. After simple training, general engineering technicians will be able to easily configure their Advantech BACnet 3000BC I/O modules.
	Web-enabled HMI Platform Advantech's Serial Device Servers are easy to install and configure, support wired and wireless networking and provide various operation modes to satisfy rigorous industrial automation needs. EKI-1000 Serial Device Servers enable RS-232/422/485 serial devices to be dual-connected to Ethernet switches for unrivaled reliability. Product line covers wired and wireless (WLAN, GPRS, 3G) serial device server, modbus gateway, and programmable device server.
	Web-enabled DDC & I/O Modules Advantech DDC (Direct Digital Controller) are powerful integrated field controllers suitable for building automation applications. Through various onboard I/Os and expansion IO modules, they provide versatile options to satisfy a wide range of application requirements. Their compact size makes them an ideal solution to fulfill BA applications. Advantech DDC features BASPro, an easy-to-use graphical programming tool that helps engineers develop applications quickly. BASPro delivers many function blocks suitable for BA applications, such as scheduler, HVAC calculation, sequential control, PID control, alarm, message, etc
	Energy Data Concentrators Advantech's Energy Data Concentrator supports serial communication ports and several networking interfaces. Pre-installed with Advantech's WinCE WebAccess management software, the BEMG-4110 and BEMG-4220 are browser-controlled Energy Data Concentrators, whose Web Server function increases flexibility and convenience, making it easy to configure and maintain the system via the Internet. With a built-in driver, the BEMG-4110/4220 can connect to and collect data from a wide variety of automation equipment and devices.

Advantech BEMS

Building Energy Management Software
	Main Features Browser-based energy management system Rich charts to view energy consumption from various perspectives Supports flexible report functions Various data analysis functions to generate energy consumption patterns Advanced demand limit control

Introduction
Advantech BEMS is a set of advanced Web-based energy management system aiming at helping customers with energy consumption management. This system can collect energy consumption data of different classifications and sub-items. Customers can create energy management projects and groups to manage these data according to their requirements. Various charts and its statistical analysis function can help customers to find out an optimized energy-saving strategy.