• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

ADAM-6117EI

8-ch Isolated Analog Input EtherNet/IP Module


Main Features

  • EtherNet/IP protocol
  • High common mode voltage 200 VDC
  • Isolation Protection: 2,500 VDC
  • 2 x RJ-45 LAN (daisy chain)
 
Introduction


Advantech's ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Designed with 2,500 VDC isolation protections, ADAM-6117EI, 8-ch Isolated Analog Input EtherNet/IP Module, is very resistant to field interference. It is also equipped with the EtherNet/IP protocol, and allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. More importantly, Advantech's ADAM.NET Utility comes bundled with each ADAM-6100 module, allowing users to configure, set, and test ADAM-6100 modules through Ethernet.
Specifications
Part Number ADAM-6117EI-AE
Analog Input Channels 8 (differential)
Input Impedance > 10 MW (voltage) 
120 W (current)
Input Type mV, V, mA
lnput Range ±150 mV, ±500 mV, ±1 V 
±5 V, ±10 V, 0~20 mA, 
4~20 mA, ±20 mA
Span Drift ± 30 ppm/°C
Zero Drift ±6 µV/° C
Resolution 16-bit with accuracy ±0.1% 
of FSR (voltage) 
±0.2% of FSR (current)
Sampling Rate 12 sample/second (total)
CMR @ 50/60 Hz 92 dB
NMR @ 50/60 Hz 60 dB
High Common
Mode		 200 VDC

 

ADAM-6150EI

15-ch Isolated Digital I/O EtherNet/IP Module
 


Main Features

  • EtherNet/IP protocol
  • 8-ch digital input and 7-ch digital output (sink)
  • Normal output current: 0.1 A (per channel)
  • 2 x RJ-45 LAN (daisy chain)
 
Introduction


Advantech's ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Designed with 2,500 VDC isolation protections, ADAM-6117EI, 8-ch Isolated Analog Input EtherNet/IP Module, is very resistant to field interference. It is also equipped with the EtherNet/IP protocol, and allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. More importantly, Advantech's ADAM.NET Utility comes bundled with each ADAM-6100 module, allowing users to configure, set, and test ADAM-6100 modules through Ethernet.
Specifications
Part Number ADAM-6150EI-AE
Analog Input Channels -
Current Input -
Direct Sensor 
Input		 -
Resolution -
Sampling Rate -
Voltage Input -
Input Channels 8
Output Channels 7
Interface 10/100 Mbps Ethernet
Connectors EtherNet/IP
High Common
Mode		 2 x RJ-45 LAN (Daisy Chain), Plug-in screw terminal block (I/O and power)
Isolation Protection 2,500 VDC

 

ADAM-6151EI

16-ch Isolated Digital Input EtherNet/IP Module
 


Main Features

  • EtherNet/IP protocol
  • 16-ch digital input
  • Normal output current: 0.1 A (per channel)
  • 2 x RJ-45 LAN (daisy chain)
 
Introduction


Advantech's ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Designed with 2,500 VDC isolation protections, ADAM-6151EI, 16-ch isolated digital input EtherNet/IP module, is very resistant to field interference. It is also equipped with the EtherNet/IP protocol, and allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. More importantly, Advantech's ADAM.NET Utility comes bundled with each ADAM-6100 module, allowing users to configure, set, and test ADAM-6100 modules through Ethernet.
Specifications
Part Number ADAM-6151EI-AE
Analog Input Channels -
Current Input -
Direct Sensor 
Input		 -
Resolution -
Sampling Rate -
Voltage Input -
Input Channels 16
Output Channels -
Interface 10/100 Mbps Ethernet
Support Protocol EtherNet/IP
Connectors 2 x RJ-45 LAN (Daisy Chain), Plug-in screw terminal block (I/O and power)
Isolation Protection 2,500 VDC

 

ADAM-6156EI

16-ch Isolated Digital Output EtherNet/IP Module


Main Features

  • EtherNet/IP protocol
  • 16-ch digital output
  • Normal output current: 0.1 A (per channel)
  • 2 x RJ-45 LAN (daisy chain)
 
Introduction


Advantech's ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Designed with 2,500 VDC isolation protections, ADAM-6156EI, 16-ch isolated digital output EtherNet/IP module, is very resistant to field interference. It is also equipped with the EtherNet/IP protocol, and allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. More importantly, Advantech's ADAM.NET Utility comes bundled with each ADAM-6100 module, allowing users to configure, set, and test ADAM-6100 modules through Ethernet.
Specifications
Part Number ADAM-6151EI-AE
Analog Input Channels -
Current Input -
Direct Sensor 
Input		 -
Resolution -
Sampling Rate -
Voltage Input -
Input Channels -
Output Channels 16
Interface 10/100 Mbps Ethernet
Support Protocol EtherNet/IP
Connectors 2 x RJ-45 LAN (Daisy Chain), Plug-in screw terminal block (I/O and power)
Isolation Protection 2,500 VDC

 

More Articles ...

  1. ADAM-6160EI
  2. EtherNet/IP Modules
  3. GuardLogix Safety Controllers
Page 138 of 195
  • Siemens
Siemens offers a wide range of Programmable Logic Controllers (PLC). S7-1200 PLC is suitable for small individual machine applications, whereas S7-300 PLC was previously targeted towards medium to high demand applications. However since it is nearing its end-of-lifecycle, S7-300/400 PLC series have been supplemented with the innovative S7-1500 PLC series. A new range of HMI panels are also available in all sizes for suitable operator control/monitoring. S7-1200 and S7-1500 are both part of Totally Integrated Automation (TIA) platform and programmable via Siemens TIA Portal software.
Simatic 300

          SIMATIC S7-300

 
Simatic 1200

         SIMATIC S7-1200

 
Simatic 1500

         SIMATIC S7-1500

 

s7 400

          SIMATIC S7-400

 
Simatic HMI

          SIMATIC HMI